HR report Category - only time period selection

Hi experts,
Do you know what is the name of HR report category which allow only time period selection? Thanks!

Hi Anthony,
<li>There are few predefined HR Report categories for time data.
XX_20002
XXX20001
XXXX2001
Thanks
Venkat.O

Similar Messages

  • COPA and Fagalflexa loading failure while giving time period selection

    Dear All,
    While doing  copa load the job is getting terminated in the r/3 system by giving dump  Abap4 processor compute_int_plus_overflow.This error is coming when we give a time period and do a init this problem is coming,request you to pls tell if anybody had face this issue and the same issue we are facing while loading data from fagalflexa.
    Request you to pls update fast.
    Thanks,
    Jyoti

    compute_int_plus_overflow might be due to overfolw of value in any of the keyfigure.
    Check whether any of the key figure value is exceeding the specified length... i think as the name suggest it must be a INT field.
    Regards,
    Sharayu

  • Selection-screen using HR report category

    Hi friends,
       I have a developed HR report using PNP ldb in which i have used the HR report category to specify my selection-screen.But still my requirment is not getting fullfiled.I require 1)Company Code
                            2)Payroll Period selection block also.
    But even if i dont enter value in this payroll area it should excecute.As of now it throws an error message saying "No valid payroll area specified"
    I want to generate report for any month given in other period of the payroll Area wrt company code.

    As per your question, remember that, the period will be different for each and every Payroll area.May be same period will behave differenly like weekly, monthly, semi-monthly.. with different payroll area.
    So the parameter payroll area will always be mandatory..

  • Regrading report category in hr-abap

    hi experts,
                     cud u plz tell me how to create our own report category with the help of spro what i want in my report category only personnel no,plant and payroll area,(payroll period in ranges) sud come ..plz help me regarding this.....
    Message was edited by:
            ravi gupta

    please see this  link  it was give  as  screen  shot  of the report category  creation  .
    <a href="http://">http://www.sapdevelopment.co.uk/hr/hr_repcat.htm</a>
    <b>if the  link if  not  opening by  double click   ...just   copy paste in the  web .</b>
    reward  points  if it is usefull ....
    Girish

  • Report Category in PNP LDB

    Hi,
    I have a HR Report using LDB PNP.
    I need the fields, Today and Key Date on the Date Selection Block and the Default Fields on the Data Selection Block.
            - Country, - Company code,
         - Personnel Area, - Personnel Sub-area,
         - Employee Group, - Employee Sub Group,
         - Contract of IT 0001
         - Payroll area,
         - Controlling area - Cost center,
         - Administrator group,
         - Payroll administrator, - Personnel administrator,
         - Time recording administrator
         - Personnel number,
         - Organizational Unit, - Position, - Function
    Is there a standard Report Category to generate this Selection screen or should I go with creating a new one.
    Please suggest.
    Thanks,
    Suryakiran D.

    Hi suryakiran,
    1. PNPCE
    2. use the above ldb (instead of pnp)
    3. In the selection, screen,
      on the toolbar,
      u will get on button 
      "selection fields"
    4. Press this button,
      and u then
      select (transfer to right)
      the fields u want.
    5. It has ALL the fields, u mentioned.
    regards,
    amit m.

  • Reg: HR report category

    Hi,
          How to create report category to configure my selection screen
      criteria : PNP  HR report category _X22T60
    screen layout fields: 
      key date
             today
             other keydate
    selection
           personnel  number
           Employee status
           personnel area
           personnel subarea
           Org unit

    Hi,
    Go to the attributes of your HR report and in the Attributes pop up, click on the button for Report Category.
    In the pop up for (Infotypes) - maintain the report category : _X22T60.
    Hope this helps.
    If you want to create your own report category, look into maintenance views (SM30 transaction) for tables T599F and T599C.
    Cheers,
    Aditya

  • How to Dynamically Select the Data File for a Report at Print Time

    How do you configure a Crystal report to ask for the file to be reported on as the report is being printed, and allow the user to browse to the file?
    The environment is Crystal Reports XI, SP3, with ODBC connection to Sage Timberline Office data version 9.7.  The client names their Payroll unposted time file each pay period, and also needs to report on their posted data file, depending on the time period for the report.  The client will need to select both the date range and the file name.
    I have created a SQL statement in Add Command in Database Expert, which prompts for a file name, but it does not let you browse to select a file on the computer.
    Therefore, in the prompts when they print the report, the parameter offers the user a default file name similar to the name they currently use, so they only have to change the payroll period end date in the supplied file name to run the report successfully.
    The client is concerned that sometimes a user will name their data file differently, and not know how to input the file name into the Crystal report prompt at print time.
    My research on dynamic prompts showed you can link to fields inside the data record, but I did not see a way to dynamically link to select the actual files used in the report.
    Another question is that the naming convention used by the SQL query is different than the basic Windows file name, but I think I can handle that issue.
    The actual file name is typically similar to:
    04-10-11 BP NEW.PRT
    However, in the SQL query, the record ID looks like:
    PRT_00-00-00 BP NEW__TIME
    The SQL Statement using a parameter is:
    SELECT
    "PRT_CURRENT__TIME"."Employee",
    "EMPLOYEE1"."Employee_Name",
    "PRT_CURRENT__TIME"."Date",
    "PRT_CURRENT__TIME"."Units",
    "PRT_CURRENT__TIME"."Job",
    "JOB1"."BP_Emps_Used"
    FROM
    "PRT_CURRENT__TIME" AS "PRT_CURRENT__TIME"
    INNER JOIN "JCM_MASTER__JOB" AS "JOB1"
    ON "PRT_CURRENT__TIME"."Job"="JOB1"."Job"
    INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE1"
    ON "PRT_CURRENT__TIME"."Employee"="EMPLOYEE1"."Employee"
    WHERE "JOB1"."BP_Emps_Used" = 1
    AND
    ("PRT_CURRENT__TIME"."Date" BETWEEN
    {?As of Date} - 41 AND {?As of Date})
    UNION ALL
    ( SELECT
    "PRT_NEW__TIME"."Employee",
    "EMPLOYEE2"."Employee_Name",
    "PRT_NEW__TIME"."Date",
    "PRT_NEW__TIME"."Units",
    "PRT_NEW__TIME"."Job",
    "JOB2"."BP_Emps_Used"
    FROM
    "{?NEWPRT}" AS "PRT_NEW__TIME"
    INNER JOIN "JCM_MASTER__JOB" AS "JOB2"
    ON "PRT_NEW__TIME"."Job"="JOB2"."Job"
    INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE2"
    ON "PRT_NEW__TIME"."Employee"="EMPLOYEE2"."Employee"
    WHERE "JOB2"."BP_Emps_Used" = 1
    AND
    ("PRT_NEW__TIME"."Date" BETWEEN
    {?As of Date} - 41 AND {?As of Date})

    Hello,
    Sorry you'll have to contact Sage on how to do this. We can help you once you get connected but we can't help you get around their connection methods.
    There is no Preview Set Database Connection method you can use in CR Designer. The Designer assumes you select it first or use the Set Location option before previewing or refreshing the data.
    If you are doing this in the Sage program itself we can't help you, you'll have to contact Sage for assistance.
    Sage is an OEM Partner they are responsible for supporting their product and CR. If they have issues help you then they will contact us directly for assistance.
    Thank you
    Don

  • Wrong period displayed for current period in HR Report Category

    Dear Friends,
    I have used HR report category (X_M00002) in my program that only shows two options (radiobutton) for period selection:
    1. Current Period
    2. Other Period
    Problem is that when I select current period and press enter key it takes 01.2006 (i.e. 01.04.2006 to 30.04.2006) instead of current period 01.2010.
    What could the possible error be?
    Regards,
    Amit

    Hi Amit
    The current period will not be set based on the current calendar month and year. The current period will be based on the current period for the payroll area which you have entered. You can check the current period of a given payroll area from the transaction PA03.
    Hope this answers your question.
    Regards
    Ranganath

  • Report workload by calculating how many versions of SharePoint list items created in a certain time period

    I have a total of 66 SharePoint 2010 lists - yes, 66! - each lists contains between 1500 and 3200 list items.  My employees update these various list items throughout their workday.  Each update to a list item creates a new version of the list
    item.  On average each list item will have anywhere from 5 to 10 versions before it is done.  I need to create a report that tells me how many list items they've updated in a certain time frame.  I have come close but still cannot arrive at
    the data I'm looking for. 
    This is what I have so far:
    I've created a report using SQL Report Builder 2008 v3 where I've filtered it to show only items MODIFIED between, for example, Feb1 and Feb28.  Of those records, I want the report to tell me how many versions were created during that time
    frame.  The result is one list item with 5 total versions.  Versions 1.0, 2.0, & 3.0 were created on 12/12/14.  The last two versions, 4.0 and 5.0, were created on 2/24/15.  Therefore, the answer I'm looking for is 2 because they
    created 2 versions between Feb1 and Feb28.
    However I get the following results using these queries:
    If I do a =Sum(Fields!owshiddenversion.Value) in the expression field I get the total versions which is 5
    If I do a =Count(Fields!owshiddenversion.Value) in the expression field I get the instance which is 1
    Is there a way to count ONLY the number of versions created in a time period?  Is there another hidden field in SharePoint that I can use in the expression that will give me results I'm looking for?

    Hi Rafael70,
    Per my understanding that you have already get all the need fields and informaiton of the updated version of list items and now you want to calculate how many versions of SharePoint list items created in a certain time period, you can't get desired result
    using sum and count function, right?
    I have tried to tested on my local environment but because I am not clear what is value in the field "owshiddenversion", I assumed you have two datatype parameters (StartDate and EndDate) to help filter the report in a certain time period.
    Generally, if you have add the filter correctly, it will filter the correct number's updated version in this time period, I would like you to provide details information as below to help better analysis the requirements:
    Could you please provide sample data of the table.
    Please provide snapshot of the report structure you have currently designed.
    Please try to provide all the expression you have used.
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Hr report category remove selection fields..

    hi again All,
    I am facing a problem again. I tried generating a new category for my report. Now again after creating the category i do not see how to add fields and remove selection fields. I need only company code in my selection criteria and nothing else.
    can neone help me?
    suresh and sarika, i m expecting lot of you..
    please help..
    Reena..

    Reena,
    Pl follow these steps..
    1.In the Program Attributes, click on the pushbutton 'HR Report Category'.Click on the 'Create' icon in the pop-up window that comes up.
    2. On the next screen click on the 'New entries ' pushbutton in the menu bar.
    3. In the next screen enter a anme for the report Category, say, 0COMPCODE.
    4.On the same screen, you have a Navigation tree to the left hand side, click on the Allowable selection Criteria Node
    5. On the next screen, click on the New Entriees pushbutton
    6. On the next screen enter 'PNPBUKRS'.
    7. You will be prompted to tie it to a Transaport Request. Attach it to the sam ereq that your Report is tied to.
    8. SAVE it & attach it to your Program.
    ~Suresh

  • Category dependent time functionality in Reporting

    Hi Experts,
    I have this kinda requirement in my reporting like :
    In my category I have members like C1,C2,C3 where across C1 I maintained april 2014,may2014 across C2 and June 2014 across C3.
    So what I want in my reporting is when I choose category as C1 then in my report at line items under time dimension the month should get
    start from april2014 and if I choose C2 then may2014 and so on. So Please guide how we can do in reporting.
    Thanks
    natasha

    Hi Natasha,
    If your intention is to have a nested dimension where category and time exist, with each row (or column) being a category with the particular time you want, then Naresh is correct, you need to maintain this in the category dimension.
    To do so, just add a property called something like "CAT_TIME", then within the report editor, select Category as normal, but when you make your time member selection, don't choose specific members.  Just select the dropdown below the member selector, choose "Dimension Property'.  Then select Category and your new property and select the right arrow to move it into the member selection area.  Now, for each category member in your axis, you will also have the relevant time member.
    Is this what you are after?
    Chris

  • Report background engine show only one report at a time

    Hi
    My operating system is Xp
    Developer version is 6I
    database 10g
    i am runing report through form with run_product
    When i run one report its show in background engin Preview i don't want to close this report
    and i run 2nd report then its show waiting in preview i want to run 2 or more reports at a time
    Regards
    Shahzaib ismail

    Shahzaib,
    In Oracle 6i, you can open only 1 report at a time. As far as i know, there is no option to show more than 1 report.
    Regards,
    Manu.

  • Dynamic selections in Report category

    I am trying to create a dynamic selection view for a report category, while doing so i am not able to add any table to table dialog that appears, when i enter PA0001 it says PA0001 is not a table. Same problem for any table i try to insert.
    Can anyone help me with a solution.
    Thanks in advance.

    In transaction SE80, i selected "edit object" button -> in the screen that pops-up i selected the tab "more"
    In that tab i selected radio button "Selection View" and then selected create button
    Then  "Create Selection View" screen appears, there i selected CUS View, checked radio button "for any tables" and gave a name of view 'ZTEST' and pressed the continue button, A screen appears to enter tables, when i enter any table it gives the message Table not found.
    When i try in other systems it works, not sure of the problem in our dev system.
    Thanks,
    Thirumal

  • Vendor evaluation report for a definite time period

    Hi Experts,
    Vendor Evaluation Summary Report required for the vendors for a definite time period. Output of the report should show the scores of vendors for criteria like Price, Delivery, Quality, Service and summation of all these scores.
    Please let me know if any standard report is available which can fulfill my requirement.
    Thanks in advance.
    Kishore.

    Hi,
    ME6H report is not fulfilling my requirement since i require the output format in the form like vendor, vendor name, plant, price, delivery, service, quality and the summation of scores given to these criterias.
    Thanks
    Kishore.

  • Selecting only time in oracle forms

    Hi all,
    like date picker in oracle forms can i select the time in oracle forms into a text item.
    i want to display the time in this format 10:10:30 a.m. and also i want to insert into the table
    i have taken the data type of this column as varchar2(15) if i take date can i insert the time or varchar2 is ok.
    my oracle forms version is 10g.
    please reply...

    Hi, extreme
    extreme wrote:
    Hi all,
    like date picker in oracle forms can i select the time in oracle forms into a text item.
    i want to display the time in this format 10:10:30 a.m. and also i want to insert into the table
    i have taken the data type of this column as varchar2(15) if i take date can i insert the time or varchar2 is ok.Better take column having data type date. You can insert date and time in the date field.
    Just you need to change in forms.
    Change the Data type Date to Datetime
    to show only time, use format mask.
    Hope this helps

Maybe you are looking for

  • How can I create a dynamic image button

    Hi I want to fill a region with buttons with image. I will execute a PL/SQL procedure to do this. I have made some tests but the image didn't is shown. I write in my plsql code: htp.p('<input type="image" src="#WORKSPACE_IMAGES#image.png" >'); Any he

  • How To Transfer MP3 Music Files At A 96kb speed, From A CD To A Zen Mic

    I have a couple of CDs with MP3 music files on them. One problem is that the music is recorded at various speeds from 28 to 320kbs. I know of to transfer the files over, but I can't seem to lower the speed down to 96kb. I want to know if it is possib

  • IMovie'11 on my mac won't start.

    Just keeps bumping in the dock and the app takes up a large amount of cpu usage, what to do? I have a Unibody MacBook (2008 modell) running the latest snow leopard os Intel Core2Duo 2,0 ghz with 2 gb of ram, It's perfectly able to run iMovie'11 but i

  • Batch Processor, WIA and Inferred entity instances

    Hi All, I'm playing around with the new OPA 10.4. I bumped into an error in What-If-Analysis document when I tried to add a new worksheet for an inferred entity. Is this not possible in WIA? Does it mean it will not work as well with Batch Processor.

  • Why do video clips in purchased v12 still show "created with trial version"

    I'm new to Premiere so bear with me. I trialled elements v12, liked it and purchased a download. When I import clips they still show "created with trial version". I removed all traces I could find of the trial version before installing the new one so