HR standard report through Adobe Document Services

Hi,
since note "1155459 RPCIIDP0: layout correction of company title in PDF format", SAP transformed this report in an Adobe form.
Although I can find ADS configuration guides in this forums, my question is: Wouldnu2019t be normal that SAP had this technical conversion of the form prepared for anyone who implements this note?
This note was delivered in HRSP SAPKE60031, so there is no way to skip this new form, we must use it. We also noticed that ADS is not installed in our implementation. So how can we use this standard report?
I now, I have to configure Adobe Services, but this is a very technical issue, needs some portal configuration, needs web services to be publish, and so on. I don't have this kind of expertise, but the question here is, should I have? I guess that ADS should be pre-installed before SAP decides that I must use Adobe Forms for a functionality I always had available in ABAP List before the HRSP.
Regards.
Sérgio.

Hi
Please tell me the printer you are using?
Use LP01 do not use LOCL.
Thanks
MNR

Similar Messages

Adobe document service error: SOAP Runtime Exception

Hello,
I am trying to test an Adobe Form created using the ABAP workbench SFP transaction, and getting the following error.
Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport : (100101)
These are the steps I am using.
1. Call SFP transaction and select an ADOBE Form.
2. Function key F8 to test
3. Select the Output device and do "Print Preview"
Our configuration is : WAS 6.40 SP11 and corresponding ADS level. We used the standard SAP ADS configuration guide to setup.
Thanks in advance for any reply.
Regards,
PK

Hi PK
it looks like you have a problem with either your Adobe document services or your RFC configuration. In the current ADS Configuration Guide in the SAP Service Marketplace, you find a configuration quick test in chapter 3.4. The results should tell you if this is the issue.
There are 2 tests you can run:
A. Checking the User and Password
This is a small test where you can check that your entries for user, security role, and passwords are correct.
Procedure:
1. Enter the following URL in your web browser:
http://<server>:<port>/AdobeDocumentServices/Config
where <server> is the name of the J2EE engine where the Adobe document services are installed and <port> is the port of the J2EE engine.
Note that the entries in the URL are case-sensitive.
2. The web page of the web service AdobeDocumentServices is displayed. Choose Test.
3. Choose rpdata(test.) .
4. Choose the Send button without entering any parameters.
5. Enter the same user name and password as given in the configuration steps earlier.
6. Choose Submit.
If the configuration is correct, you get the information about the Version number in the response area.
If the configuration settings are not correct, the page does not change and Submit still appears.
B. Checking the ABAP Connection
This is a small test for checking the RFC destination you have created.
Procedure
1. Log on to your SAP system.
2. Call transaction SE38
3. Enter the name of the test report: FP_PDF_TEST_OO.
4. Choose Execute (F8)
If the configuration is correct, you get the Version Information.
If the configuration is not correct, you get a dialog box with fields for user and password. Check your configuration settings and also the entries you made when creating the ABAP connection.
Hope this helps.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Adobe Document Services - Default Settings

Hi there
We are providing users with the functionality to print their reports through PDF. This functionality is working almost perfectly (apart from the irritating fact that multi line cell headings are not printed), but what I have been requested to change now are the default settings that are displayed when the download starts.
There is a screen that asks for the theme that should be used, and more importantly, the page layout ... it would be great if we could change those default settings, but I don't know where that is done ... any ideas?
Cheers,
Andrew

Not sure if this blog maybe of use... (it relates to XI and Adobe Document Service, but running on NW2004s)
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s

SOAP Runtime exception using Adobe Document Services

Hi all,
we have an intermittent problem with the following scenario:
ECC6 ABAP system which runs our Payroll.
Separate JAVA instance running our SAP portal and Adobe Document Services.
SM59 connection from the ABAP system to the portal server where ADS runs. Connection via port 5554.
We have written our own transaction ZPAYSLIP which allows users to view and print their payslips using ADS. This transaction uses a program generated in transaction HRFORMS.
Periodically, this transaction will fail with the following error at the bottom of the user's screen:
ADS: SOAP Runtime Exception: CSoapExceptionTransport: (100101SOAP Framework error: SOAP Runtime Exception)
A lot of the problem is that this issue is sporadic and difficult to reproduce. Whenever it has been reported to me and I try to reproduce the error I am unable to. A test of the SM59 connection shows everything is OK and if I ask the user to retry it, it will work.
I have asked our network team to check the connection between the 2 servers at the time when the error happens, but they cannot find any problems with connectivity between them, and yet it looks to me like the problem is a temporary loss of connectivity or that ADS somehow becomes temporarily unavailable.
I have done the checks as referred to in sapnote 944221 (many times!) but that all checks out OK.
We have logged a call with SAP, but they haven't really come up with a solution apart from restarting the JAVA engine which is not what we want to have to do.
We also experience the same error from time to time with some of our portal functionality which also uses ADS.
Has anyone experienced a similar error or have any suggestions as to how we might fix this?
Regards....John

Hi,
We have encountered a very similar issue after patching our dual stack ECC to NW23/ERP603 sp8. After first correcting it by routing the ADS calls directly to the server (and not through the web dipspatcher), we then updated our SAP Web Dispatcher to a newer version and this seems to have resolved it while maintaining the necessary load-balancing functionality of the web dispatcher.
Hope this helps.
Ruben

How to Activate Adobe Document Services

Hi
I would like to develop PDF reports from my Web Dynpro application.
I have the Adobe LiveCycle Designer installed and working.
I understand that Adobe Document Services comes as standard on portal 7.0, but needs to be activated.
Could someone pls show me how to activate the Adobe Document Services on the Visual Administrator?
thanks in advance
Anton Kruse

Hi Francois
I down loaded a trial credential and installed in but still get an error.
I am trying to run the completed tutorial provided on the SDN - TutWD_DynamicForm.
Please could you look at it ans steer me in the right direction.
The initial exception that caused the request to fail, was:
   java.lang.Exception: Incorrect content-type found 'text/html'
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ClientMimeMessage.initDeserializationMode(ClientMimeMessage.java:120)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:951)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
    at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
    at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:396)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:341)
     ... 29 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
     java.lang.Exception: Incorrect content-type found text/html
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3710)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:139)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
     ... 32 more
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
     java.lang.Exception: Incorrect content-type found 'text/html'
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:359)
     ... 35 more
Caused by: java.lang.Exception: Incorrect content-type found 'text/html'
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ClientMimeMessage.initDeserializationMode(ClientMimeMessage.java:120)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:951)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
     ... 37 more

Adobe Document Services - NetWeaver 7.3 - Windows Azure

Hello,
Does SAP support running Adobe Document Services on Microsoft Azure? I am planning to migrate my in-premise ADS JAVA instance to Microsoft Cloud Machine, and looking for guidance, if SAP supports this and if there are SAPNotes around this.
Thanks
Sandeep

Hello RB,
The problem is in these report,
FP_PDF_TEST_00
FP_TEST_IA_01
FP_CHECK_DESTINATION_SERVICE & FP_CHECK_HTTP_DATA_TRANSFER
without check
with check
The password in ABAP user and Java is the same.
Thanks for your support.

Adobe Document Services (not installed)

Hi Guys,
I have installed SAP CE 7.2 SP1 as a standard installation and opted for all components at installation time. I have installed also Adobe LiveCycle Designer, created my interactive form and deployed it. When I wanted to run the corresponding task I get an error message. I read previous forum posts on this topic and tried to do the configuration of ADS. But in the functional units configuration I see that the Adobe Document Services is not installed.
Does anybody encountered this problem ? Can you please help me with this issues?
Kindly provide your helpful inputs on this issue.
Thank you and best regards,
Stefania Rusu

John,
Can you please give me an indication of where to find the ADS file? I tend to think that they are not on the service market place anymore, but maybe I am not looking for the proper files.
Thank you and best regards,
Stefy

Adobe Document Services Licensing or not.

Hi Expert,
I have small doubt. Adobe Document Services Licensing or not. How to configure ADS. I have insttaled Adobe LiveCycle Designer in my local PC. I have created designed form through TCode:- SFP. But I have run the application Device type unsuitable for ADS documents & Call contained error(s): ADS (2) error message show.
Thanks & Regards,
Rahul

A

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

Adobe Document Service Configuratio issue

Hi,
I've been working on configuration of Adobe document service on a sneak preview version and have followed all the steps. At the end, when I try to access an interactive adobe form, I'm getting an error. The error details are given below. The end date in Credential file is June, 30th 2007. Could this be causing this error?
Error details follow. __________________________________________________________________
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "UsageRights" operation. Request start time: Mon Jul 16 08:42:05 CDT 2007 com.adobe.ProcessingError: Not allowed by credential error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_J2E_19194250\DM7732629269596364001.dir\DM-3397984132576576763.tmp Specific error information: $$$/PDF/PDFCredentialDoesNotSpecifiedUsageRights=credential does not allow setting of specified UB rights General error information: IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0 Exception Stack Trace: com.adobe.ProcessingError: Not allowed by credential error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_J2E_19194250\DM7732629269596364001.dir\DM-3397984132576576763.tmp Specific error information: $$$/PDF/PDFCredentialDoesNotSpecifiedUsageRights=credential does not allow setting of specified UB rights General error information: IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0 at com.adobe.ads.request.UsageRights.execute(Unknown Source) at com.adobe.BaseADSRequest.doWork(Unknown Source) at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.adobe.document.pdf.NotAllowedByCredential: IDL:com/adobe/document/pdf/NotAllowedByCredential:1.0 at com.adobe.document.pdf.NotAllowedByCredentialHelper.read(NotAllowedByCredentialHelper.java:67) at com.adobe.document.pdf._PDFDocumentStub.setUsageRights(_PDFDocumentStub.java:286) at com.adobe.EJB_PDFAgent.setUsageRights(Unknown Source) ... 31 more
Waiting for your suggestions,
Thanks.

You'll find a trial set of credentials for Adobe Document Services here on SDN at this link:
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70aa75cc-6ac3-2910-c78c-ade192ec861e">ADS Credentials - good through Oct 2007</a>

Configuring the Destination URL for the Adobe Document Services

hi all,
I am going through the documentation for "Configuring the Destination URL for the Adobe Document Services " at :
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
I am not able to understand 7th step
7. Define the user name and password. To find out how to create the user name and password for the Adobe document services, see Creating a User for Basic Authentication in the document Adobe Document Services Configuration Guide. You can find this guide in the SAP Service Marketplace under Quick Link /InstguidesNW04.
In our scenario
We are running NW04s SP11 on 2 machines
1) 32-bit machine with ADS and credentials properly configured on Web AS for Java installation
com.adobe AdobeDocumentServices null (710.20061024154505.342190)
com.adobe AdobeDocumentServicesEjbClientLibrary null (705.20060407121920.289077)
sap.com SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700)
sap.com SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700)
com.adobe DocumentServicesBinaries2 null (710.20060629085312.115621)
com.adobe DocumentServicesConfiguration null (710.20061024154505.342190)
com.adobe DocumentServicesDestProtoService null (710.20060821084105.325745)
com.adobe DocumentServicesLibrary null (710.20060629090137.115621)
com.adobe DocumentServicesLicenseDatabase null (705.20051005114147.242570)
com.adobe DocumentServicesLicenseManager null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseService null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseSupportService null (710.20060929113641.336248)

2) 64-bit machine with portal installation on Web AS for Java, with ESS and MSS
sap.com/SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153304
sap.com/SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153213
sap.com SAP_ESS 600 SP7 (1000.600.0.7.12.20070314050106)
sap.com SAP_MSS 600 SP7 (1000.600.0.7.4.20070321052655)
sap.com tc/wd/webdynpro null (7.0009.20060804145649.0000) 

Why do we have to create a new user for the server which is consuming the web service? We already have an user "ADSUser" defined for the Web AS server which has ADS services deployed.
I have opened this thread to solve the previous unanswered question I posted on SDN Empty area in place of Interactive form. .
One more thing the adobe print forms of ESS [Total Compensation Statement and Salary Statement] are rendering properly, only the ones with Interactive ability or not.
thanks,
Sanketh

Hello Sanketh,
1. To access the NW04s configuration guide,
 - Go to https://service.sap.com/adobe
 - On the left frame (tree), under Adobe > Media Library > Documentation
 - On the right had pane you will find the link to the NW04s Configuration guide
2. The link that you have mentioned below details the steps required to be carried out on the client machine that consumes the Adobe Document Services. In our case that is the j2ee engine on which your Web Dynpro application is running. It could be the same physical machine with two different j2ee instances hosting Web Dynpro and ADS or it could be two different physical machine or a single machine having a single instance of j2ee engine hosting both the Web Dynpro and the ADS.
You do not have to create a separate username and a password on the consuming machine but you need to configure the Web Service client proxy to point to the ADS (maybe hosted on a different machine) with the username and the password created on the ADS server. As you have mentioned, you have already created such an user on the ADS (ADSUser). This user authentication on the client machine (consuming server - Web Dynpro) would be required at the runtime by the j2ee engine to authenticate itself with the ADS.
Best Regards,
Krish

Adobe Document Service?

Hello All
What is ADS?
Why we need this?
How to configure ADS through Visual Admin?
Kindly provide the steps/documents regarding it..
Thank You....

Hi,
Gothrough Below Links
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9ea34c2-0701-0010-e2a2-d8e9cd6d85dc
My struggles with the Adobe Document Services in WAS6.40
Regards,
SubbaRao Chinta

Adobe Document Service to print PO attachments

Hi,
If anyone has Adobe Document Service (ADS) installed on their system, could you please create a Purchase Order (PO) with an attachment and take a printout of the PO and check if the attachment is printed along with the PO. If it is then please let me know.
In one of the threads I read that you need to install Adobe Document Service(ADS) to print the attachment along with the PO. But nowhere in the ADS documentation did I read that installing ADS will help print the attachement with the PO. I need to be sure of the solution before I reccomend installing ADS to the client.
Also if anyone has any documentation on ADS especially saying that it will help print PO attachments while printing PO please let me know.
Thanks,
Jack

Hi Jack/Yann,
I am on SRM4.0 SP9 and wanted to achieve the same. But got a reply from SAP as below :
Dear Customer,
The print and fax option will only display the attachment names, not
the actual attachment which is part of the purchase order, if you wish
to provide the attachments to the vendor please use the XML or email
output option and the attachment will be included in this document
type.
Is it possible through XDC, can you please share the document with me so I can read it.
My id [email protected]
thanks,
smita

Adobe Document Services Problem

Hello all,
When running a test of ADS (FP_CHECK_DESTINATION_SERVICE in se38) in our SCM 2007 system, I get the error -> SYSTEM ERROR: com.adobe.ProcessingException: CORBA conncetion to XMLForm failed please verify the binaries are deployed to the os_libs directory.
From what I can tell I've done the necessary post installation steps for ADS. If anyone has seen this and has a suggestion of how I might resolve this, I would appreciate it. Thank you.
~TJ

Hi,
Please find the step that you need to configure for Local ADS.
1 Testing the Adobe Document Service
Check the adobe services on JAVA System by using the
URL: http://hostname.domain:5xx00/wsnavigator
Click AdobeDocumentService->Click on Test ->rpData->then Send ->then enter ADSUSER and password.
2 Test the RFC Connection in ABAP Side
Goto SM59 and then check the RFC connection under the HTTP connection to external server.
this Rfc should point to its own .
3 Activate the ICF service in ABAP Side
Log on to your SAP Web AS ABAP system
Choose transaction SICF.
Choose default host u2192 sap u2192 bc u2192 fp in the tree.
Choose Service/Virt.Host u2192 Activate
4 Configuration in Destination Visual Admin
Create the destination FP_ICF_DATA_SID under HTTP
Under the Url give http://hostname.domain:80xx
User ADS_agent and password here.
5 Execute Following reports in ABAP Side
Goto se38 : Program name, Now Execute report FP_PDF_TEST_00
Now run the report FP_CHECK_DESTINATION_SERVICE
once run this report without checking the destimation and after thet run with checking the destination box.both should return the same number of bytes as per note 944221
Thanks
Rishi Abrol

Help Adobe Document Services capabilities

Hi,
1. Can Adobe document services be configured for continuoulsly monitoring a folder "watching a folder" for xml files (which is data source)
2. Once a xml file is placed into the folder ADS should pick up the file and merge it with the xdp file (livecycle designer) template to create a pdf file.
Please let me know wheather it is possible in ADS ?
Thanks,
Kanna.

Hello Kanna,
ADS does not do this as standard. You could create a custom program to do this...
Regards,
Tiago

HR standard report through Adobe Document Services

Similar Messages

Maybe you are looking for