HRALXSYNC Background job is cancelled

Hi,
I scheduled HRALXSYNC report in background but it is executed for some time and then it is Canceled and the job type is execute immediately.
Here am pasting the details of scheduled job.
Date            Time           Message text
08/30/2011 07:09:52    Job started
08/30/2011 07:09:52    Step 001 started (program HRALXSYNC, variant SAP&DEFAULT, user ID SHAIKSJ)
08/30/2011 07:17:34    Enter at least one number for the business partner
08/30/2011 07:17:34    Job cancelled after system exception ERROR_MESSAGE
Note: Here this background job run as "changes since".
Can any suggest me how to solve this issue.
Thanks in advance
Saleem

Hi Saleem,
Not sure if you already solved your issue.
But I have one remark regarding the value of "Changes Since":
The program HRALXSYNC stores the date of last successful runtime in table T77ZZ (REPID=HRALXSYNC).
"01.01.1900" is the inital default date. Please start HRALXSYNC in dialog mode and select "Changes Since" and execute the program. Then select all lines of the result list and press on the 'Repair' button. Errors in the result need to be investigated.
I am actually as well 'fighting' in the area of HR data Integration into CRM.
Kind Regards,
Bjoern

Similar Messages

Background job PLAAP5BULCOD_CONS_CHECK_CCR_MPOR cancelling

Hi,
Background job PLATA_CONS_CHECK_CC_EMPTOR canceling in my SCM 5 system.
Log from SAM is as below. Job is running around 2.5 hours.
In ST, found few time out errors while this job is running.
Didnt found errors related to this job (user, twp) in SAM.
Is function module /SAPPORO/COIF_DELTA_SE_FROM_R and /SAPPORO/DM_COPY_ORDERS_LCD_PACK related to the program /SAPPORO/COIF_DELFTWARE ?
how to fix this? is any other logs are available to check this (in SCM)?
Please suggest.
(AIX,Oracle,SCM)
SAM error: ____________________________________________________________________________________
21.03.2010 10:30:03 Job started
21.03.2010 10:30:03 Step 001 started (program /SAPPORO/COIF_DELFTWARE, variant PR_MANU_FORD, user ID BATCH_AM)
21.03.2010 11:13:04 Iteration executed
21.03.2010 11:13:05 Spool request (number 0000031813) created without immediate output
21.03.2010 11:13:05 Results saved successfully
21.03.2010 11:13:06 Step 002 started (program /SAPPORO/COIF_DELFTWARE, variant PR_PLAN_FORD, user ID BATCH_AM)
21.03.2010 12:00:18 Iteration executed
21.03.2010 12:00:24 Spool request (number 0000031833) created without immediate output
21.03.2010 12:00:25 Results saved successfully
21.03.2010 12:00:25 Step 003 started (program /SAPPORO/COIF_DELFTWARE, variant PR_MANU_FORD, user ID BATCH_AM)
21.03.2010 13:00:58
21.03.2010 13:00:58 Background job terminated due to communication error
21.03.2010 13:00:58 Job canceled after system exception ERROR_MESSAGE
ST22 Errors_______________________________________________________________________________
TIME_OUT ERRORS with the following details:
user ID: BATCH_AM
Function module: /SAPPORO/COIF_DELTA_SE_FROM_R (and /SAPPORO/DM_COPY_ORDERS_LCD_PACK also )
Thanks & Regards,
Nagendra.

Hi Nagendra,
it seems the problem is related to timed out issue in the work process
what is the present value of rdisp/max_wprun_time ? check in RZ11 , increase the value of atleast 3600 ( setting zero is maximum value , you can also try and revert back once bgd process completes)
Thanks and regards
Purna

Background job got cancelled for the user ----- Isolation and resolution

Hi Experts,
One background job got cancelled for the user I have the Jobname and User...
Able to view the log information in SM37.
I am not sure what is the next step to do and how to resolve this issue.
Could any one please provide me the step by step Isolating the issue and resolving it.
That would be really greatfull.
Thank you in advance.
Regards,
Prem.

Hi,
What the error it was stating in that SM37 job log?
Pls post that error log, not completely just mention the error here we'll try to help you.
rgds,

Background job getting CANCELLED

hello,
i have a background job scheduled for a report program.it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
You attempted to change, delete or create a line in the
internal table "???", but no valid cursor exists
for the table.
Possible reasons:
1. The relevent ABAP/4 statement does not include the addition
   "...INDEX...", although the statement is not
   inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevent ABAP/4 statement was called from within a
   "LOOP...ENDLOOP" loop after a DELETE "???".
what could be the reason?

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

SAP GRC AC 5.3 RAR Background jobs are cancelled

Hi Experts,
we have newly implemented theS AP GRC AC 5.3 RAR Help me in troubleshooting the Background jobs cancellation in SAP GRC AC5.3 RAR.. we have reported this issue to customersupport they asked us to upgrade the front end patch level to Sp15, even we upgraded still i have the same problem.. later we upgraded the backend patch according to the SAP Note. still the problem is not resolved.
Latest recommendation they are asking us to uninstall the SMD agent.. and also my java control.exe is showing yellow color
help me how to resolve the issue.??
Edited by: n.s.k mohan on May 10, 2011 6:21 AM

Hi,
Could you please first change RAR log settings to Java logger then take a restart of the system. After that log for your background will start coming in RAR. Then schedule the job if it fails then paste background job log here.
Also, in future, please raise GRC related issue in GRC forum so that you can get more replies.
Thanks
Sunny

Background Jobs getting Cancelled

Hi SRM Gurus
we are working on SRM 4.0 and follow a classic scenarios.
We have schedulled following background jobs
1 BBP_GET_STATUS_2
2 CLEAN_REQREQ_UP
3 SMWP_BATCH
Which were running successfully however from yesterday this all jobs are showing status cancelled.
Can any one throw some light as to why this jobs are getting cancelled or how to check the reaons for the cancelling of jobs.
regards,
Nimish Sheth

Hi Nimish,
for how long where they running ?
They might be cancelled because of time out (ex: R/3 system not available temporary).
Do you have traces in SM21 in the same time fence ?
Rgds
Christophe

Background job E2E_HK_CONTROLLER cancelled

Hi,
We have solman 7.0 EHp1/Oracle on HP-UX.
The daily background job E2E_HK_CONTROLLER fails and the user is SMD_RFC.
The job log is:
Job started
Step 001 started (program E2E_HK_CONTROLLER, variant , user ID SMD_RFC)
Internal session terminated with a runtime error (see ST22)
Job cancelled
the ST22 says:
The current ABAP program "SAPLE2E_EFWK_HOUSEKEEPING" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
But i cant find which target system is being referred here.
Pls help
Nanda

Hi,
Thanks for ur reply.
The error analysis is:
An error occurred when executing a REMOTE FUNCTION CALL
It was logged under the name "CREATE_DATA_UNKNOWN_TYPE"
on the called page.
and the How to correct error section is:
Please refer to the notes described in the
short dump.

Background job is cancelled dut o variant not exist

Dear friends,
In my program I have created a variant using FM 'RS_VARIANT_CREATE', and after the creation of variant , i'm submitting the job immediately, but the job get canceled with error message, specified variant is not defined.
when i checked the VARID table the variant gets updated, the time differnce is approximately 8 sec for both varaint creation and job start timre. Can any one face this type of issue, could any one help on this.
Thanks for your time.
Best regards
Kumar.

Hi Kumar,
Right after you create your variant use the statement COMMIT WORK AND WAIT.
If it doesn't work you can do something like this
While f_found = space.
select * from varid
where report = 'XYZ'
and variant = 'MYVAR'.
if sy-subrc = 0.
f_found = 'X'.
else.
wait up to 1 seconds.
endif.
endwhile.
I still think try COMMIT WORK AND WAIT after calling RS_VARIANT_CREATE.
Kind regards,
Marius

Background Job get Cancelled when executing the report. Reason?

Hi All,
I have scheduled a Back ground Job and executed Immediately.
when checking transacion SM37 the job get canceled.
How to find out the problem for the Job Cancellation.
Regards,
Viji

hi
After scheduling back ground job ( give a time laps of 2 min )
then go to sm37 ( at this moment , the job is not yet started) .
select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
Now you can start debug ur code.
Revrt back if any issues.
Regards,
Naveen

All Background Jobs Are cancelled

Hi all,
I make a new server by restoreing backup of our production server and SAP is running well.But when I schedule any back ground jobs all jobs are cancelled.Due to this I am not able to run SGEN.Even when I manually schedule any back ground jobs it also cancelled and I am not getting any job log in SM37.I am not able to understand why this happens as I am not found any cancelled job log.Please suggest what shall I do to overcome this problem.
Advance Thanks
Nirmal

Hi,
check the file system /SAPMNT/<SID> space in your System.I think ur memory is fully utilized sapmnt folder.
if u not need old logs delete the log file in the following location.
sapmnt/D01/global//<Clientno>JBLOG.
Regards
Senthil Kumar.S

Report program when run in background job getting cancelled immediately

Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        IS_LAYOUT         = IS_LAYOUT
        I_SAVE            = 'A'
        IS_VARIANT        = GS_VARIANT
      CHANGING
        IT_FIELDCATALOG   = IT_FIELDCATALOG
        IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani Yeluri

Hi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan.

Standard Background Job getting cancelled

Hello Guru ,
In my BI dev server one standard event periodic job is geting cancelled due to following reason
Job Name : AP_CCMS_MONI_BATCH_STARTUP_DP
Program: RSAL_BATCH_TOOL_STARTUPDISP
cancelled error
No alerts in configuration range
Internal error:
Job cancelled after system exception ERROR_MESSAGE
can anybody help me in this regards
Regards
Deepak

Run the job once again and lets see what happens... sometimes system cancels the job....check in ST22 if there is short dump.
Thanks....
Shambhu

Background job got cancelled

Hi Experts,
Could you please explain to me the below error? I would like to know the root cause of this.
"Server group parallel_generators does not exist or has too few resources
Job cancelled after system exception ERROR_MESSAGE"
Hoping for your immediate response.
Regards,

Hi,
Here's the settings you are looking for.
rdisp/rfc_max_own_used_wp - 100
rdisp/rfc_min_wait_dia_wp - 10
rdisp/wp_no_dia - 71
rdisp/rfc_use_quotas - 1
Do you think the following values are enough? Any suggestions on this issue?
Regards,

Background job getting cancelled : Choose at least one scope of list

Hello to all,
I am trying to Run on Z report in background which conatins SUBMIT statement to standard progarm for MB5B .This report already programmed to call a report in background.It takes stocks for given period,I am taking the values using "import memory-id" statement.It gives an error log in SM37 as:
Choose at least one scope of list
Message no. M7829
Can we call a submit stmt in a report that is to run in background?? or pls provide any alternative for this problem??
Thnax & Regards
Sonal

Hi Sonal,
1. This is happening because there are some checkboxes on the selection screen
   which are ticked by default when we run in fore ground
   and are blank when run in background.
Hence the system gives the error meaning to select atleast one of them.
2. We can simulate this error in foreground also.
   There is one button on selection screen in the middle frame.
   "> Category"
   Just push it.
   Some checkboxes will appear now.
   Untick all of them and run the report. You will get the same error
Choose at least one scope of list
3. So while doing SUBMIT in the z report, you can pass the values of those checkboxes (which ever you require) as 'X'.
eg.
report abc.
submit RM07MLBD
with matnr = '3'
with pa_wdzer = 'X'.
4. The checkboxes field names are:
PARAMETERS : pa_wdzer    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdzew    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwiz    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwuw    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_wdwew    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_ndzer    LIKE AM07M-MB5B_XONUL
                          modif id liu.
PARAMETERS : pa_ndsto    LIKE AM07M-MB5B_XONUL
                          modif id liu.
regards,
amit m.

Background job is cancelled

Hi Experts
please find the screen shot, and give me solution
Regards
dhrish

Hi Dhrish,
Looks like this is a problem with the heap memory.Please find the procedure to identify and resolve the same.
Trouble-shoot SAP job/program termination on memory error | SAP application performance
Regards
Sandy Sam

HRALXSYNC Background job is cancelled

Similar Messages

Maybe you are looking for