HRMS APP-PER-52803:Your business group does not match your security profile
I see this as a common problem, please guide me as to what should be done to rectify it.
While opening \Payroll\Description, it gives message as under:
HRMS APP-PER-52803:Your business group does not match your security profile
Regards
Nemo
Hi,
I feel that "HR: Security Profile" option is not set properly, BZ of that screen is errors out.
Please check the following Profile Options
HR: Security Profile -- Enter the sec profile name which is business Group name
HR: Business Group -- Your Business Group Name
Note: If you set the HR: Security Profile optional first, then system will sets the HR: Business Group profile option too automatically.
I hope this will solves your problem.
thanks
Krishna Prasad Rapolu
Oracle HRMS Consultant.
Similar Messages
-
App Signing Error, Number of Folios Does Not Match the Main Folio File
Hi All;
I have a 250 page standalone app that I am trying to compile for the Apple Store. I read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my user directory to capture the issue. Here is the snippet of the log that was created that, to me, shows why the app isn't being signed.
46386 ERROR [main] codesign.Signer - Failure during signing
java.lang.RuntimeException: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio(IPAOutputHelp er.java:272)
at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio(IPAOutputHelper.java:1 92)
at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)
at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)
at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)
at com.adobe.devtech.codesign.Signer.main(Signer.java:46)
46388 ERROR [main] codesign.Signer - Error: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
I've stripped out special characters from the article titles and re-built the app only to face the same error. I went ahead and created a new AppID in the Apple Developer Portal, created new provision files, and the error remains. I am now creating a new folio and importing the articles into the new folio to see if that will solve the "number of folios does not match" issue.
Any help or insight would be amazing. Thank you all.
-mattI created a new folio and imported all of the articles again. After hitting "Create App" for this new folio, at about 10 pages in a "PDF Export" error stopped the create app process. I went into InDesign to update the layout for the 10th page to see that the PDF export issue was stopping me from updating the layouts as well. Something in the InDesign file wasn't playing nice with the folio creation, so I created two new InDesign files, deleted the article, and built a new article from scratch. I was able to import the new layouts as a new article to the main folio and hit "Create App" again. This time there were no issues with the creation process. I synched up the provision files in App Builder and was able to code sign the application.
I guess the moral of the story is to double and even triple check every article along the way to make sure there are no issues being introduced into the process that will ultimately cause headaches during the distribution phase of app creation!
-matt -
Segment Builder: 'Business partner does not exist in target group'
After having built a target group in the segment builder the following error message occurs: 'Business partner does not exist in target group'. What is meant by this error message and what has caused this error?
Hi Mahesh,
Are data sources based in infoset¿? If the are based in infoset u can do simple queries.
I create infoset in t-code 'SQ02', once the infoset has been created u can go to 'Enviroment' --> Queries, and here u can created simple queries based in the infoset. With this tool u can check if this infoset has been created sucessfully.
Hope it helps u.
Regards,
Mon -
Your credit card does not match your bank's records
your credit card does not match your bank's records. appears at purchase in itunes store.
2 months with no solution on this. Nothing has changed with my bank at all. Yet apple was able to bill the same card for my mobile me acct. so the card does in fact work! I emailed and got what I already knew. see below, then my reply.
Dear Eric,
You can change your iTunes Store billing information at any time. When you update your credit card number or billing address through the iTunes Store, any equivalent information you might use with MobileMe, iPhoto, Aperture, or the Apple Store online is also updated.
To update your billing address or credit card number, follow these steps:
1) Make sure you're using the latest version of iTunes. It can be downloaded free of charge from the Apple website:
http://www.apple.com/itunes/download
Eric, installing the latest version of iTunes will not affect your library or any items in your account that you haven't downloaded.
2) Click this link: http://phobos.apple.com/accountSummary
iTunes will automatically launch and the sign-in dialog will appear.
3) If you are not already signed in, you will need to enter your iTunes Store account name and password and then click the Account Info button.
4) On your Apple Account Information page, click Edit Payment Information
Make the necessary changes. Your billing address should be exactly the same as the address on your credit card statement and with the United States Postal Service (click "Find a ZIP Code" at http://www.usps.com and follow the onscreen instructions). This is important, because even differences in punctuation, abbreviation, and capitalization can cause payment errors that might prevent you from using the iTunes Store.
5) When all of the information is up to date, click Done.
When you update your billing information, the iTunes Store places an authorization hold on your credit card to verify your account information. You might see this authorization request on your online statement. This is not an actual charge; it is simply a test to confirm that your credit card account is active and has credit available to accommodate transactions.
Authorization requests are automatically removed from your account by your financial institution. The amount of time it takes to remove authorization requests varies by financial institution. If you have any questions about the way your financial institution handles authorization requests, please contact their customer-service department.
Thank you for your time. If you have any other questions or concerns, regarding your iTunes Store account, Eric, please feel free to reply to this email. Have a great day.
Sincerely,
Timothy
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Please Note:I work Sunday 9:00 to 6:00 Tuesday and wednesday 9:00 to 6:00 Friday and Saturday 9:00 to 6:00 Central Standard Time
Thank you for allowing me the opportunity to assist you. You may receive an AppleCare survey email; any feedback you provide would be greatly appreciated.
My reply
I've read the support pages through and through and have gone through all of these steps in the past. Nothing on my end has changed. This card has been used for approx three years now, never to have been edited. As stated... In the midst of all of this difficulty, you were able to bill the same card for my mobile me subscription. Which should technically not gone through due to the supposed billing info not matching my bank's records! So quite simply, my card does work, this is something on your end, not my bank.
And I did however change the type case to match my statement to no avail. This never made a difference in the past, but I tried it regardless.
After attempting things for two months, I am growing tired of trying to spend my money on Apple. I will try one more suggestion if one is available. After that, I have had great success with the amazon store and may have to flip over to them. My time is way too valuable to be troubleshooting a problem I did not create.
any specific help would be appreciated (please do not copy and paste tips from the support pages... been there)
EricAs a follow up to my last post, I thought I would offer you my customer service experience as I am hoping you can avoiding going through what I've been through and that this will save you some time.
I'm listing the discourse chronologically for your convenience:
Specific request: My credit card or billing information is not accepted
Details:
iTunes says my credit card information does not match my bank information and will not let me make purchases. I have updated my account information and I still cannot make purchases. I get the same message that my card does not match my bank's information- which it does.
Please help.
TrackID: 1--------------
Dear ----------,
Welcome to Apple iTunes Store Customer Support. My name is Snehashish.
I am sorry to hear that you haven't been able to make purchases on the iTunes Store with your credit card. I know this is frustrating, and I will try to provide as much information as I can to help you resolve it.
-----------, upon checking your account I find your credit card will be expired after this month. So you have to change it then. I suggest you to change it now or contact your credit card company as it is declined by iTunes.
The iTunes Store has been unable to verify an authorization from your credit card company. There are several possible reasons for this:
- Your credit card company's servers may have been busy. Trying again later may resolve the issue.
- Your card may not have been activated yet. If so, you will need to activate it.
- You may need to call your credit card company before the authorization is approved.
- You may need to ensure that you correctly located the credit card's security code. To see instructions for locating the security code, choose View My Account from the iTunes Store menu, sign in to your account, click Edit Payment Information, and then click the "What is this?" link next to the Security Code field.
- Your billing name or address does not match the address listed on your credit card statement. Any discrepancy in punctuation, abbreviation, or capitalization can cause errors, which might prevent you from purchasing from the iTunes Store. If you moved, or if your zip code changed recently, ask your credit card company to make sure its records are up to date and match exactly what you are entering as your billing information.
--------, please follow these steps to confirm or update your account information:
1) Go to the My Apple ID site at:
http://appleid.apple.com/
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the left column.
6) Confirm or edit your information.
7) Click "Phone Numbers" on the left. Make sure the area codes and phone numbers are entered correctly in their respective fields.
8) Click Save Changes.
Once your information is updated, try placing an order on the iTunes Store again. If the iTunes Store still cannot obtain an authorization for your card, it means that your billing information is still incorrect, either with your credit card company or with its verification system, which may be handled by another company.
Fortunately, you may be able to make iTunes Store purchases with another payment method. For example, if PayPal accepts your credit card, you can use your PayPal account to buy from the iTunes Store. If you need more information about using PayPal on the iTunes Store, please let me know.
------, I hope this information is helpful. Thank you for your interest; I am pleased that you want to be an iTunes Store customer. Have a great day!
Sincerely,
Snehashish
iTunes Store Customer Support
Thank you for allowing me the opportunity to assist you. You may receive an AppleCare survey email; any feedback you provide would be greatly appreciated.
Follow-Up: 1----------------
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
Snehashish
iTunes Store Customer Support
Greetings Snehashish,
When I wrote my original ticket it was to address the issue of the fact I had already updated my credit card information and I was still receiving the error message of "my credit card not matching my bank information" in iTunes. Giving me instructions on how to update my account information was not helpful because I had already taken that step. So, no, my problem remains unresolved and I am unable to make any purchases in iTunes or update my iPhone.
Luckily, the item I was looking to purchase was available on Amazon digitally so I went ahead and bought it there without any problem whatsoever with my credit card- furthering the mystery and the enigma that is iTunes rejection of my credit card.
Please send the next step to resolve my issue or please forward my ticket to someone who can resolve this for me.
Thank you,
Dear ------------,
Welcome back to Apple iTunes Store Customer Support. This is Snehashish again.
I am glad to hear that your credit card works on another website. Some of our customer resolves this type of issue by removing credit card from their account, buy a free app and then re-add the credit card to account. I suggest you to try that.
---------, please delete the credit card information from your account:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
After you select the "None" option, please attempt to download a free App from iTunes Store. Then sign out from your account and sign in back and re-add your credit card information.
--------, then, please follow these steps to confirm or update your account's information:
1) Go to the My Apple ID site at:
http://appleid.apple.com/
2) If the site is not displayed in your preferred language, click the Change Language link in the upper-right corner, type the name of your language in the field that appears, then click the Save button.
3) Click the "Manage your account" link.
4) Type your iTunes Store account name (which is your Apple ID) in the Apple ID field, type your password in the password field, then click the Sign In button.
5) Click "Addresses" in the left column.
6) Confirm or edit your information.
7) Click "Phone Numbers" on the left. Make sure the area codes and phone numbers are entered correctly in their respective fields.
8) Click Save Changes.
Once your information is updated, try placing an order on the iTunes Store again.
If you have further questions or concerns, please feel free to contact me again. Have a nice day, ----------!
Hello again Snehashish,
My address is confirmed and matches my bank account. I followed the steps as you directed with deleting my information downloading the free application and then re-entering my payment information. I continue get the error message that my credit card information does not match my bank's records. I have as of today called the bank and confirmed twice that my banking address is correct. The error is not happening on the banking side of the equation.
Please send the next step to resolve my issue or please forward my ticket to someone who can resolve this for me.
Thank you very much,
Dear -------,
Welcome back to Apple iTunes Store Customer Support. This is Snehashish again.
Thank you for your response. Upon reviewing your account I find you removed that credit card successfully. I suggest you to update that information to start purchasing. You can also use gift card as well.
--------, you can change your iTunes Store billing information at any time. When you update your credit card number or billing address through the iTunes Store, any equivalent information you might use with MobileMe, iPhoto, Aperture, or the Apple Store online is also updated.
To update your billing address or credit card number, follow these steps:
1) Make sure you're using the latest version of iTunes. It can be downloaded free of charge from the Apple website:
http://www.apple.com/itunes/download
Note: Installing the latest version of iTunes will not affect your library or any items in your account that you haven't downloaded.
2) Click this link: <link to launch itunes>
iTunes will automatically launch and the sign-in dialog will appear.
3) If you are not already signed in, you will need to enter your iTunes Store account name and password and then click the Account Info button.
4) On your Apple Account Information page, click Edit Payment Information
Make the necessary changes. Your billing address should be exactly the same as the address on your credit card statement and with the United States Postal Service (click "Find a ZIP Code" at http://www.usps.com and follow the onscreen instructions). This is important, because even differences in punctuation, abbreviation, and capitalization can cause payment errors that might prevent you from using the iTunes Store.
5) When all of the information is up to date, click Done.
When you update your billing information, the iTunes Store places an authorization hold on your credit card to verify your account information. You might see this authorization request on your online statement. This is not an actual charge; it is simply a test to confirm that your credit card account is active and has credit available to accommodate transactions.
Authorization requests are automatically removed from your account by your financial institution. The amount of time it takes to remove authorization requests varies by financial institution. If you have any questions about the way your financial institution handles authorization requests, please contact their customer-service department.
---------, if you have further questions or concerns, please feel free to contact me again. Have a nice day!
Despite already having the current version of iTunes, I re-downloaded the program and installed it on my computer. I logged into the link you sent me. I entered in my banking (again and without mistake) information exactly as it is on my billing information. I have now entered my credit card information correctly on iTunes repeatedly- it has not deviated nor changed and there has never been a mistake in my data entry. I have used this credit card at other locations and online stores without error and my banking and credit card information is correct.
I entered a credit card I DO NOT want to use in conjunction with my iTunes account and it was accepted without incident or error message. The problem is that the card I do want to use, that I NEED to use to make purchases on iTunes is not accepted. Both cards are issued through the same bank- one is debit and one is credit and they both link to the same bank account with the same home address. The debit card is being rejected and the credit card is accepted. My problem is not my address nor the account number as both have been entered correctly multiple times. iTunes is rejecting my particular card even though it is working and matches my bank information. This is the card I have always used to make purchases on iTunes and this error started when my old card expired and I attempted to update my account.
Every time I re-enter my credit card and try to make a purchase and I always get the following message:
"There are errors or omissions in the information. Please correct the indicated items: Your credit card does not match your bank's records. Please enter a US credit card and a matching billing address."
I have reset, re-downloaded, and re-entered everything on my end multiple times resulting in the same error from iTunes. I want to know what is happening with my account. If you do not have a solution then please escalate this ticket and please put me in contact with someone who can help me.
Thank you for your time,
I found my solution in the Apple Support Community. It had nothing to do with my information being incorrect. I do not require your assistance any longer.
My issue resolution was actual very simple and came from this page. iTunes has a bug where it will not accept your information but if you add your credit card under you account in the Apple Store and CONFIRM then it will appear in your iTunes account automatically. I could have saved hours of email, calls to the bank and stupid angst if I had looked this up instead of TRYING to use Apple Customer Support. I've learned my lesson. I just want you to know that iTunes is bugged and broken in this respect and no matter how many times you enter your information IT DOESN'T WORK. I hope this helps someone else.
Apple please tell your customer support people how to actually help instead of having them paste in worthless form letters on how to use a credit card with iTunes. Obviously it iTunes that is broken.
PLEASE FIX. -
Err while confrm Business partner does not exist (Notification E R1 201)
I am for the first time into CRM serv implementation.I have 2 issues. Please provide your valuable suggestions at the earliest.
I raised a serv order, released items, confirmed it and changed the status to complete. now when i try to raise an invoice, in billing due list, serv order num is showin up but not confirmation number. Billing relevance in item category for
service item in Serv order ---> Order related billing acc to order quantity
confirmation item category--> Transaction related billing after completion.
The reason i expect is that i have used a crm employee as employee responsible as HR is not yet in place. At the time of confirmation and data transfer to r/3 system is throwing a message that BP doesnot exist. Long text is as follows
"Business partner does not exist (Notification E R1 201)"
I am unable to trace out which BP is it unable to find. The Sold to i am using is on the other hand available in R/3.
1) Is service confirmation incomplete and hence is not appearing in Billing due list or is there any other reason?
2) How can i analyse which BP number is not avilable. i.e.. how can i check the contents of bdoc system is sending and because of which value of BP is the transfer getting stopped
Regards,
KiranHi
The link is not working.
The contents of the message is as follows
follow all the following steps
Setting up Transfer of Employee (HR Master) from R/3 to CRM
1. Logical system XXX assigned to R/3 client XXX. Logical system YYY assigned to CRM client YYY view through SCC4
2. Create RFC Destination YYY for CRM client YYY in R/3 and
Server ID with user details and client YYY.
3. Transaction code SALE : Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Maintain Distribution Model and Distribute Views. (Direct transaction code : BD64)
Go to change mode and select Create Model view.
You get a popup. Fill in the details Technical name, short text and validity
Select Add message type from the application tool bar.
Fill in the following details
Model view : HRCRM
Sender logical system : XXX
Receiver logical system : YYY
Message type : HRMD_ABA
Note : Only this message type works for employee transfer.
4.Save the model. From the same screen select the distribution model and from the menu Environment  Generate partner profiles
Dont change anything in the next screen. Simply Execute.
4.Distribute the distribution model HRCRM
Select the distribution model. From the menu bar, Edit  Model View  Distribute
You get a dialog showing the receiver logical system. Execute.
You get a log Model view HRCRM has been created in target system YYY
5.Go to the CRM system and check up whether this model has been created.
Transaction code BD64
The model has got copied. No changes can be made in CRM
6. Generate partner profiles for the distribution model in CRM by selecting
Environment  Generate partner profiles.
In the next screen, do not make any changes and Execute.
Partner profiles can be seen in transaction WE20
Delta Download Settings
7. So far, the above settings will ensure the initial download. However for any changes / new employees to be transferred, i.e delta changes, changes pointers need to be activated.
In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers Generally (BD61)
This activates change pointers globally for all message types.
8. In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers for Message Types
Activate change pointer for message type HRMD_ABA
9. CRM : Number Assignments. Generally, there are 3 types of number assignments (also called switches) when business partners are created.
1 The system uses the number from the general internal interval of the number
range object BU_PARTNER
2 The system uses the number from a specific internal interval of the object
3 The number is transferred from HR and a prefix is added. In this case, a specific external interval, which must be defined as XX00000000 (upto
XX99999999), is used (where XX denotes any two letters).
The number range object for all switch positions is BU_PARTNER, with the interval depending on the switch value.
For switch value 1, the system uses the internal standard interval, otherwise for switch values 2 and 3 you must also create a grouping (transaction BUC2) for these intervals. For the system to be able to connect the grouping and the number range interval, the name of the grouping must be exactly the same as the name of the corresponding number range interval (the name of the grouping is contained in the first column of the table). If you select 3 (HRALX/PNUMB = 3) for the number assignment of busienss partners of the employee role, create HRALX/PSUBG switch manually in table T77S0.
In table T77S0, HRALX/ONUMB is used to set the number assignment for organizational units and HRALX/PNUMB is used to set the number assignment for employees.
Create a number range ZZ
Transaction code BUC2. Create a grouping of the same ID as that of the number range. Eg. Number range ID : ZZ and grouping ID should also be ZZ
In table T77S0, maintain the following combinations
HRALX-PNUMB = 2
HRALX-PSUBG = ZZ
10. Make the following customizing changes in CRM
Transaction code SM30 : Table T77S0
Group Sem Abbr Value Abbr
HRALX HRAC X Activate HR Integration with CRM
HRALX OBPON ON Activate integration between Business partners and Org Units
HRALX PBPON ON Integration between business partners and employees
HRALX OPROL BUP004 Role definition for org unit Business partner
HRALX PPROL BUP003 Role definition for Employee Business partner
HRALX ONUMB 1 Number range assignment for org units
HRALX PNUMB 2 Number range assignment for Employees
HRALX PSUBG ZZ Number range grouping only if PNUMB is not 1.
11. Create Employee Master in R/3. Employee master consists of Infotypes. The mandatory infotypes are Actions, Address, Personal data and Organizational Assignment. You can ignore the remaining. Click on next and dont save the other infotypes.
Transaction code : PA30
12. In R/3 Initial Download : SE38 RHALEINI
Plan version : 01
Object type : P Person (always)
Object ID : Employee ID eg. 1
Receiver Partner no. : YYY
Select further details
You get all the data transfer details
13. In CRM, transaction code PP01 View HR Master objects
You see that the employee 1 has got transferred. To see the corresponding business partner go to the infotype Relationships (the first row)
Screen 2 gives you the business partner ID in CRM
Regards
Rekha Dadwal -
Encountering error End tag does not match start tag 'group'
Hi guys,
am a newbee to XML Publisher.
I am encountering the below error:
Creating XDO Report at: Wed May 25 16:38:14 GMT+05:30 2011
sql = select 'TEST' from dual;
description = Learning XML Reporting
port = 1561
user = apps
host = e2dscorhrmdba01.cendant.com
sid = ABGHRDEV
ReportParameters = {}
path = D:\lanosrep\XML\Output\FirstXMLReport
data_source_name = ABGHRDEV
name = FirstXMLReport
oracle.xml.parser.v2.XMLParseException: End tag does not match start tag 'group'.
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:205)
at oracle.xml.parser.v2.XMLReader.popXMLReader(XMLReader.java:516)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1242)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:227)
at oracle.apps.xdo.dataengine.DataProcessor.getSQLSchema(DataProcessor.java:528)
at oracle.apps.xdo.dataengine.DataProcessor.writeXMLSchema(DataProcessor.java:476)
at CreateXDOReport.createXDOReport(CreateXDOReport.java:164)
at CreateXDOReport.process(CreateXDOReport.java:108)
at CreateXDOReport.main(CreateXDOReport.java:298)
I have tried reinstalling the patch but of no use.
Please guide me.I changed the sql query
select 'TEST' from dual;
to select 'TEST' from dual
It is working fine now :) -
When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?
Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
-
when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.
-
User or group does not exists.
Hi,
I am running an unattented installation of SQL on a server. I run it with the following configuration:
;SQLSERVER2008 Configuration File
[SQLSERVER2008]
;************************* CORE ARGUMENTS *************************
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
online, Business Intelligence Development Studio, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
; Setup will not display any user interface. ***
QUIET="True"
; Needed argument for silent installation
IACCEPTSQLSERVERLICENSETERMS="True"
;*************************** OPTIONAL *****************************
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console. ***
INDICATEPROGRESS="True"
; Setup will display progress only without any user interaction.
QUIETSIMPLE="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
ENU="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
Services (RS).
INSTANCENAME="MSSQLSERVER"
; Agent account name
AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Auto-start service after installation. ***
AGTSVCSTARTUPTYPE="Automatic"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT AUTHORITY\NetworkService"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Latin1_General_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS=”CRB\dsstest”
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS=”CRB\dsstest”
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Specifies which mode report server is installed in.
; Default value: “FilesOnly”
RSINSTALLMODE="DefaultNativeMode"
; Full-Text filter launcher service account
FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
I run the installation with the user crb\dsstest, but i get the following error:
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Can anyone help me?Hi,
I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
The following are the error details:
2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
2011-12-28 12:58:47 AS: Action: Validating Account
2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
2011-12-28 12:58:47 AS: Result: Error
2011-12-28 12:58:47 AS: Result: Invalid
2011-12-28 12:58:47 AS: Result: (Validation) Complete
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Result: (Utility) Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
2011-12-28 12:58:47 AS: Result: (Utility) Success
2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
2011-12-28 12:58:47 AS: Result: Valid
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: Action: Validating Start Mode
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Action: Validating Allow in Process
2011-12-28 12:58:47 AS: Data: AllowInProcess=1
2011-12-28 12:58:47 AS: Result: Success
2011-12-28 12:58:47 AS: Result: (Validation) Success
2011-12-28 12:58:47 AS: ----------------------------------------------
2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
- User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: --- End of inner exception stack trace ---
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
2011-12-28 12:58:47 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2011-12-28 12:59:02 Slp: Inner exceptions are being indented
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp: Data:
2011-12-28 12:59:02 Slp: SQL.Setup.FailureCategory = InputSettingValidationFailure
2011-12-28 12:59:02 Slp: DisableWatson = true
2011-12-28 12:59:02 Slp: Stack:
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
2011-12-28 12:59:02 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
2011-12-28 12:59:02 Slp: Inner exception type: System.ApplicationException
2011-12-28 12:59:02 Slp: Message:
2011-12-28 12:59:02 Slp: ”CRB\dsstest” - User or group does not exists.
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
2011-12-28 12:59:02 Slp:
2011-12-28 12:59:02 Slp: Error result: -2068578304
2011-12-28 12:59:02 Slp: Result facility code: 1204
2011-12-28 12:59:02 Slp: Result error code: 0
Do you need more information then above? The above chech do not fail for the network service:
2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
2011-12-28 12:58:46 ACE: Validating service account is not LocalService
2011-12-28 12:58:46 ACE: Validating service account is a user account
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
2011-12-28 12:58:46 AS: ----------------------------------------------
2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
Do you have any idea what is worong? -
Business partner balance does not match journal entries message
Dear All,
The error message "Business partner balance does not match journal entries" appears in customer receivable report print preview. This is happened While generating the Customer Receivables Aging report by sales documents. What is the main cause ? How to resolve it ? Thanks a lot
Rgds,
EduHello,
I've got solution from SAP notes. From the notes, the problem is probably caused by :
1. Inconsistent Reconciliation
2. Unbalanced Reconciliation
3. Document is closed but the Document Journal Entry is Unreconciled
4. Business Partner Balance is Incorrect
5. Reconciling Part of Split Payment's Journal Entries
There aresome queries need to run in order to solve the problem. If you are not a partner, let me know your e-mail so that I could send.
Rgd, -
Your credit card information does not match your bank's records
I just purchase iphone 5c, and I made my iturne account, in order to downloan the app I have to put my payment information. But always shows " your credit card payment information doesn't match your bank's records". and I tried three different card shows same thing.
Is anyone has same issue? Can you anyone helps me out?
Thank youHello girl from TX
Check out the article below to troubleshoot issues with adding the credit card to your iTunes. You may just need to remove all card accounts and set it to None and then try adding the account again.
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/ts1646
Regards,
-Norm G. -
Busy greeting does not play when I am on another call
My busy greeting does not play when I am on another call. My regular greeting plays. I called verizon and they gave me some **bleep** about how that feature doesn't work if you have call waiting. It USED to work for me and why do they promote it as a dfeature with their Freedom Essentials package that comes with call waiting? Does anyone know what is going on? I need this feature to work for me.
Also in the cases of incoming calls or if you place a call and forget to dial *70, in many states you can use 3 way calling to click over and dial *70 to activate Tone Block while on a call. You will hear 3 short confirmation tones and will then be returned to your other call. HOWEVER, do this with care because in some areas there will be a charge for using the 3 way calling if you do not have a monthly subscription to it. In other states Verizon will permit you to use 3 Way solely for the purpose of activating Tone Block without a charge. So check to see what the rules are where you are beforehand.
-
IRecruitment Manager,SR BUSINESS GROUP is not a valid responsibility
Hi
I've added the iRecruitment Manager responsability to my user id and assigned the mandatory security profiles
when i try to acces any of the functiona in the menu i am getting the folowing error
'iRecruitment Manager,SR BUSINESS GROUP is not a valid responsibility for the current user. Please contact your System Administrator.'
Is there any specific profile for this issue.I crossed check the profiles with the implementation guide too but i am not able to resolve it
Thanks
Regards
Ramesh Kumar SHi Nagasuresh
HR:Business Group, HR: Security profile,
HR: User type and few mandatory profiles for iRecruitment is also set correctly and i've rechecked it also
But i couldn't find out the reason for this issue. i've faced similiar issue once with the oracle sales but i lost track how I resolved it
Any suggestion would be really great
Regards
Ramesh Kumar S -
Your Application Set does not match the applications in your Retrieval Rule
Hi,
While creating the time card iam getting the error:Your Application Set does not match the applications in your Retrieval Rule Group.
Please Suggest the solution.
ThanksIn Our case, we created a new PERSON TYPE in HR and we forgot to add this type to OTL Preferences.
So in the above scenario:
Go to US OTL Application Developer -> Preferences ->
In the Eligibility Tab. add new row
Name of Rule => any unique name
Name of Branch => enter the name of an existing branch which the time card preferences are going to be the same.
Link By => We use Person Type... You can choose PERSON here but i would not know why you would want to do that
Linked To => Person Type you want to have this for
Precedence => Unique Number
From => make sure to enter an earlier date especially when people are required to enter older than todays timecard since this field defaults to today.
If you totally dont have or want to build a new preference, then you will have to go to the Preference Tab and create a new branch.
in ours, we have Timekeeper and TimeStore and Employees
in Timekeeper -> we have timekeeper timecard layout
in TimeStore -> we have approval style, entry level processing rule, time entry rule groups, timestore retrieval rule group
in Employees -> all we have is really those preferences we;d like to see. Date Format, Enter Negative Hours, Enter Override Approver, Number of Empty Rows, Timecard Delete Allowed, Timecard Layout, Number of Recent Timecards displayed, timecard status allowing edits.
Hope the above helps -
Punch Out Catalog problem business patner does not exists
Dear experts,
We configured punch out catalogs. When we check out the portal pages has the error "business patner does not exists".
How do i resolve this. How to create the business partner on SRM system to get rid of this error.
Thanks,
vikasHi Masa,
I am enclosing the OCI Parameters returned from the external catalog.
NEW_ITEM-shoppingcartID[1] SH95
NEW_ITEM-DESCRIPTION[1] DISPENSER,FLAG&POST-IT
NEW_ITEM-MATGROUP[1]
NEW_ITEM-EXT_CATEGORY[1] 44111501
NEW_ITEM-EXT_SCHEMA_TYPE[1] unspsc
NEW_ITEM-MATNR[1]
NEW_ITEM-QUANTITY[1] 1.000
NEW_ITEM-UNIT[1] EA
NEW_ITEM-PRICE[1] 6.64
NEW_ITEM-PRICEUNIT[1] 1
NEW_ITEM-CURRENCY[1] USD
NEW_ITEM-LEADTIME[1] 1
NEW_ITEM-VENDOR[1] 1000000000
NEW_ITEM-VENDORMAT[1] A2C-313D
NEW_ITEM-MANUFACTCODE[1] MMM-C
NEW_ITEM-MANUFACTMAT[1] C-313D
NEW_ITEM-CONTRACT[1]
NEW_ITEM-CONTRACTITEM[1]
NEW_ITEM-EXT_PRODUCT_ID[1] A2C-313D
NEW_ITEM-LONGTEXT_:132 DISPENSER,FLAG&POST-IT
NEW_ITEM-SERVICE[1]
Once the external catalog returns to SRM it is throwing Null Value Exception. Is this exception is in regards to Material Group or something missing in the configuration.
Error Message:
The following error text was processed in the system : Access via 'NULL' object reference not possible.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_DOTM_SC_I_BD=CP
Method: WDDOMODIFYVIEW of program /1BCWDY/IU0RHDVCLMQ4J466CPJC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/IU0RHDVCLMQ4J466CPJC==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Please let me know how to fix this.
Thanks,
Vikas
Maybe you are looking for
-
What can I clean off the drive?
I'm doing some hard drive cleanup. I found sequnces of files of the form: applemobiledevicesupport #.#.#.# itunes #.#.#.# quicktime #.#.#.# Can I safely delete the early versions of these files leaving the most current? Thanks
-
Minimize, re size & exit icons missing from top right of screen
After upgrading to 5.3 I don't have minimize, resize or exit icons at top right of screen. Any help getting them back would be appreciated. Steve
-
Running AppleScript in the background
Okay, yet another problem I'm having that I'm going to bug the community here with. Is it at all possible to run AppleScript while doing other things? For example, if I wanted my AppleScript to hop online every hour and send me back information from
-
Classpath for getting JDK 1.3 to work on Windows XP
Hi, I've just DL and installed JSDK 1.3 on my home computer which is running Windows XP. I know that I have to set the classpath in order to run Java properly on my pc but what exactly do I set it to? I tried to set it but it still doesn't work and c
-
I hope someone can help on this...I have just spent the past 2 hours on the phone with support and have not solved the problem. I have the Lightroom app installed and tried downloading photoshop from creative cloud and got an error 16 message. I we