HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

Did you install the airport utility for windows?
Is the windows computer set to home as network location.. it will not work if it is set to work or public.
Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
That is usually the most foolproof method.

Similar Messages

How can I print via the AirPort Time Capsule on a Windows 7?

Hey,
First of all, I am really inexperienced about all these things. I have a MacBook from 2009 with OSX Lion and a PC Windows 7 x64. I have got a time capsule (https://www.mikepalmer.net/wp-content/uploads/2011/12/apple-time-capsule.jpg) connected to my router
and then another router in my room (probably working as an acces point) to which I wirelessly connect my Windows 7.
The thing is that I can see the printer (HP Laserjet P1005) from my Mac but I don't know how to add it to my windows. On a previous PC I added a printer to the time capsule's IP 192.168.1.2 and printed with a considerable delay that way.
As you can see I don't understand how networks work, how IP's work, or how ports work in this matter.
Any help will be much appreciated!!

Hi PGMLEBL,
I am not familiar with Mac product, the best way is ask the HP printer support for the detail support, generally if we know the printer IP address we can add it through add
a network printer, you may can refer the following third party article to add the printer:
how to install a network printer using TCP/IP in Windows 7
http://www.jmu.edu/computing/helpdesk/selfhelp/win7tcpipprinting.shtml
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

TS1253 Once I save my photos to the airport time capsule; can I delete them from the computer drive?

Once my photos have been saved by the airport time capsule can I delete them from my computer hard drive.

Please think about this for a moment.
If you move your images to the Time Capsule...and delete them from your computer's hard drive......then, the only copy of the images that you will have will be on the Time Capsule.
So, now your "originals" are on the Time Capsule....since you deleted them from the computer's hard drive to create more space.
When...not if....the Time Capsule has a problem and you cannot access your images.......where will your backups of your images be?

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

Is the AirPort Time Capsule only for backing up Macs or can I back up additional files from SD cards too as if it were an external hard drive?

I'm a professional photographer and I'm interested in the most recent features of the AirPort Time Capsule. I process a lot of data and much of it never hits my Mac hard drive. Currently I back up to external hard drives, but is it possible to back up files from SD cards mounted on my desktop on to the AirPort Time Capsule for instant access in the future as if the drive were an external hard drive (in addition to being a back up server)?
I appreciate input!

If your question is whether Time Machine can back up the data on the SD drives, the answer would be no.
The reason for this is that SD drives are formatted in Windows FAT16, which is not compatible with Time Machine, the backup application included with Macs.

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

Use another browser.
Mylenium

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

how do you set the airport time capsule as the primary base station rather than as a network client?

The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
So, the first logical question here would be......
What is the make and model number of the device that you call your "modem"?

Does the airport time capsule eliminate the need for my cisco linksys wireless router?

does the airport time capsule eliminate the need for my cisco linksys wireless router?

I understand that your network now looks like this:
Modem > Security Router > Cisco/Linksys router > Devices
If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
Modem > Security Router > Time Capsule > Devices

Will the new time capsule back up Windows on an iMac running Parallels Desktop?

Will the new time capsule back up Windows on an iMac running Parallels Desktop?

Windows home version MSBackup, cannot backup to network drives.
That was a little bonus from Bill for those who didn't fork out for Pro or Ultimate.
Like people with home versions would never need to backup to network drives.. oh no.. never!!
You need to mount the hard disk in windows for it to work.
It will help a lot if you load the airport utility for windows into your windows OS.
http://support.apple.com/kb/dl1547
Open windows explorer and type the network address of the TC.
\\TCname.local (where TCname is the correct network name of the TC).
The TC should have all names that are windows compatible.. ie
Fred Blog's Airport Time Capsule is just wrong. It is too long, it has spaces and it has apostrophe which is illegal.
A good name for the TC is TC
The default hard disk share name of data is fine. It should not be Time Capsule or anything again that is over long .. has spaces or is otherwise incompatible with windows.
A good name for the TC wifi is TCwifi
Then you can mount it \\TC
typing that directly into the address bar of windows explorer.
There are still issues with windows naturally and running in parallels I have no idea what other issues might come up.
Tell me if you have issues.. but you will need most likely to check the network.
Open a command window and ping the TC by name and by IP address. If IP address works just mount by IP.
\\10.0.1.1 for example .. and that is the default TC IP address when in router mode.
If you still cannot access the TC my recommendation is to use a USB drive and use that.. it is 10x easier and more reliable than mixing Mac and windows backups on the TC.

How do I connect Airport Time Capsule to a Windows Vista Machine?

I was going NUTS trying connect my new Airport Time Capsule v6.xxx to an older Vista Home machine. I searched these posts for an answer and found nothing remotely helpful. After trying a million different things...
Here is how I did it:
Open Airport Utility
Finder>Applications>Utilities>Airport Utility
Click on the image of the Airport Time capsule
Go to top of screen menu Click on EDIT in the little dialog box that pops up once you click EDIT look to the top of the screen and click on BASE STATION
Click on SHOW PASSWORDS, Carefully note the really long WPA Pre Shared Key code for "xxxx"
Go to your Vista machine and down at the bottom you will see you network connection icon. It looks like two computer monitors and a globe. Click once on it and open NETWORK and SHARING CENTER
Click once on SET UP A NETWORK CONNECTION > NEXT > WIRELESS> SET UP CONNECTION OR NETWORK> MANUALLY CONNECT TO A WIRELESS NETWORK>NEXT
Now enter the network name as you set it up in the Airport Utility and then enter the 64 digit WPA PRE SHARED KEY CODE in the SECURITY KEY/PASSPHRASE box
Click NEXT...Your Vista machine should say searching for IP address then it should connect to the Airport. I hope this saves someone the hours I spent messing with this. Good Luck!!!

I just want to extend the system with the time capsule.
Always worries me when I see that..
Do you mean wirelessly extend.. it won't work.. not just because the WRT54GS is G wireless (super G is just extended G)... but because it is not apple router.. apple can only extend wireless between routers that are apple.
You can plug the TC into the linksys via ethernet.. and run it as an AP .. use the same wireless name.. ie ssid and security but use and lock a different wireless channel.. that is better by far as it is then N wireless. you can also set 5ghz to a different name and use that for 5ghz capable stuff.
You can use EOP adapters if you cannot run ethernet but doing it via wireless.. is really not worth it.
Why don't you put the TC in place of the WRT.. and load dd-wrt on the Linksys and use that in universal repeater mode.. that would work.

How do I port forward or open a port on the Airport time capsule to hook p a security system?

I have an airport time capsule and a security system. The installer doesn't know anything about using routers etc, especially on a mac. They say I have to port forward or open a port specifically of this device. I have very few skills when doing this IT type. Is this hard to do? Can I do it myself? He wants to get an IT guy out? $55 an hour, how long would it take? Thanks in advance for anyone who can help!

The method is here.
AirPort - Port Mapping Basics using AirPort Utility v6.x
If you need to get someone in, it depends.. The TC can be recalcitrant.. due to your setup of it following the apple guides.. and it depends on the security system and how simple that is.
There are multiple issues.. for example how do you find your IP address from the web when you have dynamic IP from your ISP.
Do you intend to setup dynamic DNS? Can the camera /dvr system handle Dynamic DNS?
I recommend you read very carefully the instructions for what has been installed.. because merely opening the port is only a small part of the issues involved in remote access to the security system.

My MacBook Pro is currently online via wifi, but the airport utility doesn't recognize the airport time capsule base station and has not backed up in 10 days

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

Similar Messages

Maybe you are looking for