HT1199 installed itunes on windows 7 , but does not connect to itunes stores and gives error 0x80090318,can U help please

Can you help me here please.I've installed itunes ,my computer's OS is windows 7, but I cannot connect to itunes stores and an error 0x80090318 pops up. Dont know what to do! i did unistalling many times and reinstalling again but the same thing happens.

try this:
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
HT1925: Removing and Reinstalling iTunes for Windows XP
http://support.apple.com/kb/HT1925
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
good luck

Similar Messages

TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides.

My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling

I was updating my iphone 4 to ios5 ,but did not work! my phone is frozen with picture of lead,arrow and itunes icon. it now does not connect to itunes for me to restore. PLEASE HELP

iwas updating my iphone 4 to ios 5,did NOT work.
now it is frozen with picture of phone lead,arrow and itunes icon.
phone will not connect to itunes for me to retore.
PLEASE HELP ANYONE !

Have you tried putting the phone into recovery mode : http://support.apple.com/kb/HT1808 ?

IPOD appears in Windows but does not Appear in ITunes

O.K. Forum Gang here's goes nothing.....brand spankin' new 5thG IPOD and I can not get it to interface with ITunes. IPOD remains in "do not disconnect" mode when connected to computer via usb - itunes does not launch.
When I open ITunes this message appears "The software required for communicating with the IPod is not installed correctly. Please Reinstall ITunes." I have now reinstalled ITunes upwards of ten times and the problem still persists. I have done everything Apple asks in accordance with Apple Support document 93716 (same title as my subject line). Deleted ITunes, QuickTime, emptied Temp Files, Restated computer ad nausema...etc.
My guess, albeit an uneducated one when it comes to these problems, is that something is amiss within Windows??
If someone can step up to the plate and provide me the solution to my problem I will be overjoyed!!!
Dimension 4600 Windows XP

Problem solved Hallelujah!!
Send your checks to MarkinMadison!! Here's his post:
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"

When trying to sync with itunes error message reads Apple mobile device not started. I pod turns on but does not connect to itunes

When I try to sync my ipod with itunes I get an error message which tells me Apple mobile device is not started.

"itunes could not connect with the itunes store. An unknown error occurred (11556)."
This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
I have also an error message saying it cannot sync and error message number 0050.
Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
http://support.apple.com/kb/TS1539

My Windows Laptop does not connect to my apple 4th generation time capsule can not connect to internet.

I have a HP laptop running Windows 7. I a habe a 4th generation time capsule for wireless internet. everytime my laptop restarts it will not pick up and run the internet. i have to run the trouble shooter program to get it to reconnect. Sometimes this works sometime it does not the laptop and time capsule are both up todate on all the softwhere.

Is the TC working in router or bridge mode??
Have you set SMB compatible names.. short, no spaces pure alphanumeric.. not apple names.
Have you set wireless with different name for 5ghz.. and set channels manually and tested them.
11, 6, 1 for 2.4ghz in that order. Low.. say 36 or 40 and around 150 for 5ghz.
Test with no wireless security.. is it then working.. if so, then set wpa2 personal security with a password of 10-20 characters pure alphanumeric.
On a computer /device that does work find out the following.
DNS and Gateway.
When the PC connects to the wireless does it get the right values for DNS and Gateway.. if not then the TC is either incompatible or wireless driver is not compatible.
The fact that your windows is up to date does not mean the wireless drivers are.. Intel make the worst drivers.. if the laptop has intel wireless card. Expect trouble.
Download direct from Intel the most current driver and the last 3 or 4 available.. not even the latest is a guarantee it will work.
Even if everything is right.. dns gateway.. connection.. security.. wireless channel.. it is wireless.. it can still refuse to move packets.. it is simply the nature of the beastie. Wireless is 80% voodoo still.
Buy a different wireless chipset USB stick.. or get a wireless router like a TP-Link.. very cheap, $30-50 and use it as a WAP plugged into the TC.

HT202778 Why is it that when I plug my iPhone into my computer and press "trust", it disconnects my phone and reconnects it, and still does not connect to iTunes??

When I plug in my iPhone, it connects and begins to charge, then asks me to "trust" the computer. When I select "trust", rather than connecting to iTunes, my phone gets disconnected and then it reconnects again and continues to charge but does not connect to iTunes... I have tried restarting both my computer and my phone, I have tried uninstalling and reinstalling iTunes and I've also tried connecting my phone with different USB cables and connecting them into different USB ports... Still nothing is working.

That's how Apple set it up on the Mac.
There is a free application called iExplorer for Mac that allows you to view and copy files from your iPhone.
Hope this helps.

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
Bluetooth Device Details.
Devices (Paired, Favorites, etc):
FIPO:
Name: FIPO
Address: 00-07-88-a0-12-ce
Type: Headset
Services:
Paired: Yes
Favorite: Yes
Connected: No
Apple Bluetooth Software Version: 1.9.0f8
Hardware Settings:
Computer:
Address: 00-14-
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Desktop Computer
Composite Class Of Device: 1057028 ($102104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 129 ($81)
Requires Authentication: No

You may have to enter device code like 000 in phone so it can pair up.
Try checking the box you mentioned
Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
Try turning on Bluetooth just as phone is put in search mood.

I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s but does not connect , it shows that it wants to connect , how can you connect this?

I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?

http://support.apple.com/kb/ts1538

I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

HT1347 I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3

I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3. iTunes sorts them by month/day/year. How can I fix that?

The weird thing is, it worked before. I encoded all the videos previously and had them all listed and didn't encounter this problem, but I noticed I'd forgotten to decomb/detelecine the videos so I deleted everything and re-encoded it all. AFter filling the tags out and setting poster frames again I was thinking of making life easier by just pasting the same artwork for every episode, so I did, but didn't like the results so I deleted it again (I selected every video, used Get Info and pasted the artwork that way).
I think it was after this that the problem started to occur. In any case I've been through every episode and made sure the name, series, episode and episode id fields are all filled in with incremental values and they are. I even made sure the Sort Name field was filled in on every video. But this didn't work either.
So, thinking another restart was needed I deleted every video again. Re-encoded them all, again. Set the tags for every video and poster frame again. Finished it all off nicely, checked cover flow and was highly annoyed to find it was STILL showing the same two pieces of art work for every video as shown in that image I posted.
Ultimately, I wouldn't care so much that cover flow is screwing up like this as I always intended to sort by program anyway so it would only ever display one piece of artwork for an entire series of videos, however where-as when it was working it picked the artwork for the first episode of a series to display, its instead picking one of the latter episodes. I can't seem to find any way of choosing what artwork I want displayed.

Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

I tried to install Flash Player 10 ActiveX but no luck
operating system VISTA 32bit
web browser and version IE8 32bit
Flash Player version WIN 10,1,82,76
is there anything in the security needs to be adjusted?
It was running perfect before I do the latest upgrade
It is running perfect on Fire Fox
It is just not working on IE8
Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

Hi, You might want to review the Troubleshooting Guide as it has been updated and a lot of new information is now included. If you prefer you can use the Manual Installer for IE which you'll see there. A lot of the questions that I would ask are listed also.
http://kb2.adobe.com/cps/191/tn_19166.html
Hope this is helpful for you.
Thanks,
eidnolb

When I double-click the tab bar, FF4 just resizes the window but does not open a new tab

When I double-click the Tab Bar, FF 4.0 just resizes the window but does not open a new tab. It happens when Menu Bar is disabled (not ticked).

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") 
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r32
* Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Since upgraded to 10.4.0.80, iTunes does not connect to iTunes Store

I recently upgraded iTunes to 10.4.0.80, and since then iTunes does not connect to iTunes Store anymore. There is no error message, the window is just completly empty.

I'm having the exact same issues regarding not being able to connect to the iTunes Store. Running Windows 7.
Additionally, my iPhone 3GS (32GB) and iPad 2 (64GB) will not sync when attempting to perform a full system restore.
Also running ESET Antivirus software. I tried the following from Apple Support and neither worked:
http://support.apple.com/kb/ht1923
http://kb.eset.com/esetkb/index?page=content&id=SOLN760
I completely uninstalled and re-installed iTunes 10.4.0.80 and zeroed out IOS 4.3.5 on each device.
Additionally, I went to Control Panels > Administrative Tools > Services and stopped and restarted "Apple Mobile Device" and "Bonjour Service".
NOTHING WORKED ... STILL NOT ABLE TO SYNC.
I AM HAVING REAL DOUBTS ABOUT PURCHASING THE iPHONE 5 IF THIS SYNCING ISSUE PERSISTS !!!

HT1199 installed itunes on windows 7 , but does not connect to itunes stores and gives error 0x80090318,can U help please

Similar Messages

Maybe you are looking for