HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

Similar Messages

  • When I send a group txt and one of the people reply it creates a new message.   How do I keep all the replies in the same message?   I used to not have this problem but it started last month.

    When I send a group txt and one of the reciepients replies it creates a new message.   How do I keep all the replies in the same message?

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I just forget the birthday what I create a new iTunes account. How I get it back? Thank you

    I forget the birthday what I have typed when create a new iTunes account. Now I just want to know where I can find it

    If you can't remember your birthday then log into the account via the 'manage your apple id' button on http://appleid.apple.com, select the Password And Security section and answer the two security questions that show - you should then get a screen where you can see and/or change when you were born

  • Create a new web application, how shall I update the file server.xml

    Hi,
    I will create a new web application, i.e named newApp. Then I create a file structure as follows:
    - <server-root>/newApp
    - <server-root>/newApp/WEB-INF
    - <server-root>/newApp/WEB-INF/classes
    Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
    I use windows XP Pro, and Tomcat 4.1.27.
    My server.xml file looks like below:
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <!-- Comment these entries out to disable JMX MBeans support -->
    <!-- You may also configure custom components (e.g. Valves/Realms) by
    including your own mbean-descriptor file(s), and setting the
    "descriptors" attribute to point to a ';' seperated list of paths
    (in the ClassLoader sense) of files to add to the default list.
    e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
    -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 4.0 documentation bundle for more detailed
    instructions):
    * Download and install JSSE 1.0.2 or later, and put the JAR files
    into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <!--
    <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
    port="8009" minProcessors="5" maxProcessors="75"
    acceptCount="10" debug="0"/>
    -->
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8082" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" connectionTimeout="20000"
    proxyPort="80" useURIValidationHack="false"
    disableUploadTimeout="true" />
    -->
    <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
    <!--
    <Connector className="org.apache.catalina.connector.http.HttpConnector"
    port="8083" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
    <!--
    <Connector className="org.apache.catalina.connector.http10.HttpConnector"
    port="8084" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
    <Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Standalone" defaultHost="localhost" debug="0">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.3
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Global logger unless overridden at lower levels -->
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    debug="0" resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn"
    debug="0"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Logger shared by all Contexts related to this virtual host. By
    default (when using FileLogger), log files are created in the "logs"
    directory relative to $CATALINA_HOME. If you wish, you can specify
    a different directory with the "directory" attribute. Specify either a
    relative (to $CATALINA_HOME) or absolute path to the desired
    directory.-->
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define properties for each web application. This is only needed
    if you want to set non-default properties, or have web application
    document roots in places other than the virtual host's appBase
    directory. -->
         <DefaultContext reloadable="true"/>
    <!-- Tomcat Root Context -->
    <Context path="" docBase="ROOT" debug="0"/>
    <!-- Tomcat Examples Context -->
    <Context path="/examples" docBase="examples" debug="0"
    reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_examples_log." suffix=".txt"
    timestamp="true"/>
    <Ejb name="ejb/EmplRecord" type="Entity"
    home="com.wombat.empl.EmployeeRecordHome"
    remote="com.wombat.empl.EmployeeRecord"/>
    <!-- If you wanted the examples app to be able to edit the
    user database, you would uncomment the following entry.
    Of course, you would want to enable security on the
    application as well, so this is not done by default!
    The database object could be accessed like this:
    Context initCtx = new InitialContext();
    Context envCtx = (Context) initCtx.lookup("java:comp/env");
    UserDatabase database =
    (UserDatabase) envCtx.lookup("userDatabase");
    -->
    <!--
    <ResourceLink name="userDatabase" global="UserDatabase"
    type="org.apache.catalina.UserDatabase"/>
    -->
    <!-- PersistentManager: Uncomment the section below to test Persistent
    Sessions.
    saveOnRestart: If true, all active sessions will be saved
    to the Store when Catalina is shutdown, regardless of
    other settings. All Sessions found in the Store will be
    loaded on startup. Sessions past their expiration are
    ignored in both cases.
    maxActiveSessions: If 0 or greater, having too many active
    sessions will result in some being swapped out. minIdleSwap
    limits this. -1 or 0 means unlimited sessions are allowed.
    If it is not possible to swap sessions new sessions will
    be rejected.
    This avoids thrashing when the site is highly active.
    minIdleSwap: Sessions must be idle for at least this long
    (in seconds) before they will be swapped out due to
    activity.
    0 means sessions will almost always be swapped out after
    use - this will be noticeably slow for your users.
    maxIdleSwap: Sessions will be swapped out if idle for this
    long (in seconds). If minIdleSwap is higher, then it will
    override this. This isn't exact: it is checked periodically.
    -1 means sessions won't be swapped out for this reason,
    although they may be swapped out for maxActiveSessions.
    If set to >= 0, guarantees that all sessions found in the
    Store will be loaded on startup.
    maxIdleBackup: Sessions will be backed up (saved to the Store,
    but left in active memory) if idle for this long (in seconds),
    and all sessions found in the Store will be loaded on startup.
    If set to -1 sessions will not be backed up, 0 means they
    should be backed up shortly after being used.
    To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
    and minIdleBackup all to -1, saveOnRestart to false, then restart
    Catalina.
    -->
    <!--
    <Manager className="org.apache.catalina.session.PersistentManager"
    debug="0"
    saveOnRestart="true"
    maxActiveSessions="-1"
    minIdleSwap="-1"
    maxIdleSwap="-1"
    maxIdleBackup="-1">
    <Store className="org.apache.catalina.session.FileStore"/>
    </Manager>
    -->
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/EmployeeAppDb">
    <parameter><name>username</name><value>sa</value></parameter>
    <parameter><name>password</name><value></value></parameter>
    <parameter><name>driverClassName</name>
    <value>org.hsql.jdbcDriver</value></parameter>
    <parameter><name>url</name>
    <value>jdbc:HypersonicSQL:database</value></parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>

    To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
    You have to add a <servlet> element to this file.
    Something like this:
    <servlet>
    <servlet-name>blabla</servlet-name>
    <servlet-class>blablapackage.Blablaclass</servlet-class>
    <init-param>...</init-param>
    </servlet>
    Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

  • When i open a new tab, rather than the curser flashing in the url space it opens a new search page. how do i get the new tab to open at the url?

    when i open a new tab, rather than the curser flashing in the url window it opens a new search page. a new tab used to open at the url - how do i get it to do so again?

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I want my SLIDES to be moved on by the learner, not to have a fixed time. How do I remove the time duration from the slide?

    as above

    Interactivity is more than just reading and clicking, but that is not your question. Which version do you use? I will suppose it is the latest one, 8.0.1.242.
    Answer was already in my first reply. Insert an interactive object: shape button, normal button or click box. They can pause the slide, typical pausing time (see Timing Properties panel) is at 1.5secs for shape buttons and other buttons, at the end of its timeline for the click boxes that are invisible to the user.  Interactive objects have a Success and a Failure event, when they click on it the Success event is fired and that event can trigger an action like 'Go to Next Slide'. You'll find those actions in the Properties panel for that object, Actions tab. User can read or look as long as he wants, and only when he clicks that object he will move to the next slide. Read about Timeline: Tiny Timeline Tidbits - Captivate blog
    Since you'll probably want that object to be clicked to move to the next slide on every slide, I recommend to use a shape button. That is the only one that can be put on a master slide (maybe the main master slide), or on the first slide and timed for the rest of the project (Timing Properties panel). More details in this post:
    Why I like Shape Buttons - Captivate 6! - Captivate blog   
    Never extend a slide duration for the purpose you mention, because that is just increasing the file size for no reason.

  • I have an iTunes account with my iPhone 3GS.  Today I upgraded to the iPhone 4.  When I plugged the iPhone 4 in to get my music iTunes created a new device.  How do I get the music and photos from the other device?

    I would like to delete the new device and just sync the iPhone 4 with all the info that was on the 3GS. 

    You can get the photos by importing them from your 3GS to your computer (see http://support.apple.com/kb/HT4083) and then syncing them back to your iPhone 4.  Your music should already be in your iTunes library if you have been syncing the 3GS with your computer so all you would need to do is select to Sync Music on the Music tab of your iTunes sync settings and sync your iPhone 4 to transfer it to you new phone.  But there is no way for iTunes to see your iPhone 4 as your iPhone 3GS; it will see it as a different device no matter what you do.

  • How do I remove the trial banner after purchasing full software?

    I downloaded the Trial Version first to make sure that all of the features I needed to create the video were there.  Now I have purchased the full version and have a product code.  How do I remove the "Created with... Trial Version" banner from my current project that I have been working on, now that I have the product code entered?  It did not automatically remove.

    I found the answer,  took some looking around, but here is an answer.  I just tried it and it worked! Just make sure to save a backup of your project just in case. 
    I wanted to make this easy to find.  So here is the proper answer:
    Correct Answerby vipul vaibhav on Oct 24, 2012 11:21 AM
    The "Delete rendered Files" option is there under "Timeline" in the Menubar for deleting render files of a project.
    See the answer in context

  • I set my preference to "Google" on the default engine and I keep getting Yahoo. How do I remove yahoo?

    I set my preference to "Google" on the default engine and I keep getting Yahoo. How do I remove yahoo?

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • When I try to create a new sync account using my email address, the response says it's alreay in use. I imagine this is a relic of my old foxmarks account. Is there a way to release that email account from the old version, or to reover the password?

    I've gotten an iPhone, and downloaded the Firefox browser to it, and I'd like to sync the browsers between my iMac and iPhone. When I enter my email to create a new sync account, I'm told that it's already in use, but there's no option to retrieve my password.
    Any idea how to get around this?

    Try the options at https://services.mozilla.com/ and see if you can't recover the password.

  • I need to create a new admin account. But i lost the cd it came with and forgot my password. also can a cd be replaced

    I need to create a new admin account. but i lost the cd that came with the macbook, and forgot my password. also can the cd be replaced.

    You can purchase replacement discs from AppleCare:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.
    You can try the following to reset the password without the DVD:
    How to change your username and/or password from the Terminal
    1. Boot into single-user or verbose mode
    2. At the prompt enter the following commands.  Press RETURN after each:
    fsck -fy
    mount -uw /
    launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist
    dscl . -passwd /Users/username password
         Replace username with the targeted user and password with the desired password.
    reboot
    This allows you to reset the password in single user mode without booting from the install media.  The above tip is attributed to Satcomer.

  • Can't get my tv to home share with my pc anymore. It's been working for 11 months and all the sudden lost connection. I even created 2 new itunes accts and logged in on my pc but the tv won't accept any log in.

    Our Apple TV worked great for 11 months and all the sudden it doesn't get itunes, netflicks or anything. Won't even let us log into it. Says Itunes isn't available however it's available on my pc and lets me log in on any pc. I even created 2 new accts and logged into them on the pc but apple tv still won't allow login. Tried reconfiguring wifi and other settings. No go still.  Help!

    maybe this link will help http://www.makeuseof.com/answers/play-media-files-mac-formatted-external-hard-dr ive-hdtv/ unfortunately its for file up to 4 GB size, otherwise try to connect your mac directly to your Tv or I suggest contacting SAMSUNG about this issue, maybe the have assigned softwares for this formatting issues like in western digital for example.

  • I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password.  Therefore I cannot reset the password.  I hav created a new Adobe account so how do I get the subscription for ExportPDF m

    I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password.  Therefore I cannot reset the password.  I have created a new Adobe account so how do I get the subscription for ExportPDF moved to the new account?

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

  • I deleted my original email account which is tied with my original apple id account. If I create a new Apple account will I lose all of my music,videos, and apps?

    I deleted my email account that is tied with my original apple account. I created a new apple Id and I'm afraid that I will lose all of my previous purchases. Please help.

    Sort of.
    - Apps and other purchases are locked to the account that purchased them.
    - You have to log into the account opd do certain things with the purchases like transfer then to your computer.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
    Try recovering yur PS for the first axccount so y can change the email address.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
    Note: @mac.com and @me.com Apple IDs can not be renamed.  If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.

  • How do I delete and create a new iCloud account on my iPhone, when I cannot delete the old account off my phone!

    I have given my 4s to my wife, she has an iCloud account which uses her work address, she has now left the company and we want to start a new iCloud account, trouble is we cannot delete the old account, we have created a new iCloud account but the iPhone won't let us log into it as it only recognises the old version, we can't access her email anymore to reset the account. Have tried all online help. We restored the phone through iTunes

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

Maybe you are looking for

  • Why can't I open a new tab?

    Hello. This has happened reacently. I am clicking on the '+' symbol on the tab bar and no tab comes up. I have no more information, it is as simple as that.

  • Help in suppressing Adobe Fields

    Hello all, I am new to Adobe forms livecycle designer, apologies if it is a basic question. My requirement is as below: 1. Based on the data in my xml data file may be one field some where in the file, I should be able to suppress other fields in the

  • Support for bi-directional GIOP any time?

    One thing I was wondering about while preparing for a presentation was why bidirectional GIOP isn't supported in the 1.5 version of the ORB? The default uni-directional nature of IIOP is the achilles heel with CORBA in terms of the firewall penetrati

  • How to import a windows playlist?

    When I try to import a windows playlist, I can select it but then nothing happens and the playlist is not imported into Itunes. How can I import a windows playlist?

  • Balancing error for profit center in transaction FB08

    Dear All, We have made Vendor payments for some invoices. But for some reaseon, we have to reverse the document. When we try to do FB08, we are unable to do so and we are also getting an error ' Balancing error for Profit center.'  In our case though