HT1212 hello i forgot my password for my iphone and it doesnt let me sinc it to my computer and i need it unblocked can you help me i am locked out for 60 mins

hello can you please help me unlock my phone i need it and its locked out for 60 mins what casn i do my computer doesnt want to let me sinc it

You will have to restore it form Recovery Mode as it states in the artcile that brought you here.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Similar Messages

Hello, I am using flash CS6 on a mac. I cannot find the Motion Editor window anywhere on the flash interface. Can you help? Ben

Hello, I am using flash CS6 on a mac. I cannot find the Motion Editor window anywhere on the flash interface. Can you help? Ben

Here's what happens for me
This is my AI file
Here's the save dialog
Notice that the All button is selected.
Here's the PDF
Notice the 1/5 at the top indicating a 5 page PDF.

HT3743 Hi dear, please can you help because when I do restoring for my iphone 3g 16gb it still gives an erorr (1015). I am still confused regarding to this topic

Hi dear, please can you help because when I do restoring for my iphone 3g 16gb it still gives an erorr (1015). I am still confused regarding to this topic

i need to fix error code 1015 for my iphone3G 16gb

I have a licence for CS design stand 4, but I need to reinstall, can you help?

I have a licence for CS design stand 4, but I need to reinstall, can you help?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Can you help me find a FREE replacement for Comcast PWP that has FTP access?

So, here's how I use Comcast's PWP via FTP: First and foremost, I use FireFTP. I'd prefer to be able to keep using it. Ok, so I'm on Overclock.net and I enjoy providing tech support for anyone who needs it, when I can provide it. To that end, many of my replies to their threads are more like tutorials. So, this includes inserting screenshots into my post (not just the link, but inserting the whole image) and sometimes providing links to files that they need. In order to do that, I just upload the file (whether it's an image file or some kind of file that they need) in FireFTP, grab the URL, and use it. It's extremely easy and fast. How do I use the URL? If it's an image file, then I will just use the <img> tags (HTML code for those of you who aren't sure what I'm talking about). Overclock.net's post editor does have an 'Insert Image' button, but most of my screenshots are so big that they get resized, and I can't have that. Using the HTML code bypasses their auto-resizing "feature". If it's just a file, then I will simply paste the URL. Every now and then, I might choose instead to link some word or a phrase to a screenshot image file or the regular file that they need. It depends on what makes the most sense at the time. Like, sometimes I need to make a step-by-step list and sometimes I need a screenshot to be in one of those steps. So instead of trying to find a way to insert an image into one of the steps, I just link some text to the screenshot image file. This link needs to point to the image file (so, directly to the image), not a web page that has the image on it!! All options that I have personally looked at so far either cost money (I am not going to pay for simple file storage when I am using it like this LOL that would be stupid), or they don't provide an easy way AT ALL to obtain the absolute direct link to the file. Instead, they make you dig and dig and dig if you want that link, otherwise you're stuck with a link that points to a web page where the file download is located. Sigh. I hate that. I can't use that. Not for this type of use! I just want what I have now with Comcast's PWP via FireFTP. That's all. It's free, and I have fast downloads for my users, no file upload limit (I could upload a 1 GB file right now if I wanted to), and no expiration date on anything - including my account. I could go 6 months without any activity and still be able to use Comcast's PWP space via FireFTP. Most services seem to say that if you go inactive for more than 30 days, then your account is terminated. Most services also have a file upload limit of like 5 or 10 MB, and some of my files absolutely NEED to be much bigger than that from time to time because sometimes they are big setup files that the person needs that can't be found on the internet anymore - that I still have. Old ones. So, I also absolutely cannot have a limit on how big of a file I can upload - just as long as it doesn't exceed the storage space that's available to me, obviously. Like the 1 GB storage limit on Comcast's servers. So, can you help?

Hawkewynde wrote:
I've lost track with all of the 'discontinuance' talk going on in the other threads. Have you found a host that feeds your needs? It reads as if the goal is very simple:- have a host that can hold files for use on a message board- when someone clicks on, let's say, the <IMG> or text link, it simply displays the linked image or kicks off a file download. File size and what-not are different issues, though noted.I insert images, I don't link to them. Most people probably link to images, but I put them right in the post, just as if it were a true tutorial. The <img> tag in HTML is what displays the image on the page. Inserting images means that you display them in your post. Just like this: My images though are usually big screenshots. This is just a tiny example to show that I don't link to images, I insert them. The only time that I link to an image is when it makes more sense, such as needing to have an image inside of a list of instructions where I don't want to split the instructions up with a big screenshot. Sometimes I only need to quickly mention the image in a paragraph, and so I'll link a word or a phrase or sometimes even a sentence to it. Dropbox is working somewhat OK. Uploads are noticeably slower, and it's pretty clunky for me. I have to delete "dl=0" at the end of the link and type "raw=1" every single time if I want to avoid having the link point to the web page where the file is located (and I need to avoid that pretty much 100% of the time), and I have to go outside of Firefox to upload the file and I no longer have a very fast method of grabbing the URL. I used to just stay inside Firefox: press Alt+T, then W then F, then Tab, then Enter, and then I'd upload the file, select the file, press Ctrl+U and bam I'd be able to work with the URL however I want. That entire process usually took like 5-7 seconds (yeah, including grabbing the URL - uploads were always just that fast). Now with Dropbox, lol, the whole process from start to finish isn't worth timing. If I decide to keep using it, then I'll have to get used to it. Maybe someday it'll be that fast with Dropbox. I don't know. So, I guess I'm still looking, but at least I have something just in case I don't find anything. heh I really hate having to delete "dl=0" and then type "raw=1" every single time though. So I'd still be much happier if I could find good free FTP hosting that provides at least a gigabyte per account, the ability to have more than one account (so that I could have more space, just like with Comcast), fast uploads, and nice fast downloads. Of course, no limit to how big the upload is and no expiration date on my files or no required activity (the ability to be inactive for however long I want). I guess I'm dreaming. heh

Can you help advise re video card upgrade for my G4 MDD?

Hello all. Just upgraded to Tiger from 10.2.8 a couple weeks ago. Should have done it long ago... like having a new computer! I want to get more out of the OS for mostly graphic apps like PS-CS2, Painter, Freehand, Fontographer, etc. Right now I have 1.5 GB of RAM & will probably max it out pretty soon.
No video or games (at least for near term). Have been doing homework by lurking here, studying mfr. sites & reading things like John Siracusa's great article (book) on arstechnica.com: "Mac OSX 10.4 Tiger". I spent a lot of last night digesting that. So I think I know what I want to do, but would appreciate opinions.
1. I'd like to get a graphics card that will get my G4 to Core Image-enabled. According to this -- http://www.apple.com/macosx/features/coreimage/ -- and other advice I've run across in these forums, I should probably get a Radeon 9800 (or 9600) Pro Mac Edition. The downside w this is just that they're currently not to be found at any dealers I've called or googled because of the AMD merger/backorder situation. Same goes for the 9600. Bummer. In the meantime I'm wondering if one of Nvidia models listed in the Apple page might work in my machine. Probably not... but does anyone know different? Here are the models listed:
nVidia GeForce FX Go 5200
nVidia GeForce FX 5200 Ultra
nVidia GeForce 6800 Ultra DDL
6800 GT DDL
I think I've seen most of these configured for AGP 4x, as I would need. Just don't know if any would fit into my G4... or if it would support the power requirements, heat levels, and so on that these things apparently generate.
2. I have another requirement besides just running Tiger happily. I have hundreds of fairly big image files that all still need a lot of work, for a book project I've been commissioned to do. Average file size around 200MB. And more than half of them are in a "Legacy" proprietary format used by an out of print app called Live Picture. So even just to convert all of them from that IVUE / FITS format scheme I still need either classic or 9.2 for a while. I can still do some things in L.P. better than in Photoshop.
It's a pretty interesting piece of software. The IVUE file is the base bitmap image. All corrections are in Vector layers on top. When done, the layers you want to apply are turned on and the final (or workaround buildout) is rendered as a TIFF, PS or stn file. (It also has a great prepress filtering engine to optimize cmyk for specific outputs). This app is VERY monitor drawing intensive - especially for layers with textures or selective color mods. When I was an early adopter in the program years ago, the developers constantly told us to do things like use as small a window as possible; turn off antialiasing unless really needed; build out intermediate IVUE's before collecting too many complex layers, and things like that. It has it's own VM system, and it does not like another Virtual Mem. running. Of course in Classic you can't turn off the OSX VM!
Development on this app stopped the arrival of OSX, and I think even before OS9! It was crash-prone back then, and of course is even more fussy in Classic. I can boot in OS9, but for some reason prefer the "security" of protected mode, since these new-fangled machines no longer have that civilized reset button.
So if I understand things properly, I want a graphics engine that will take the load off RAM for Quartz Extreme tasks. I've come to think that maxing RAM AND VRAM utilization will let me do more before the crash. Am I right?
Not necessarily the same needs as for Photoshop in Tiger; but for me right now this is my critical/important working environment, as this is a big paid project (it will be a vintage watch coffee table book - which draws from a couple of the world's notable private collections). It shouldn't be long before I'll be getting a MacPro anyway. Am sort of holding out for the sophomore edition, and Leopard.
What would you guys do? Thanks in advance for your consideration. I will greatly value your input.
Best regards,
Mike
G4 MDD 867, G4 Q'slvr 733 Mac OS X (10.4.8) also iBook G3 900 10.4.8 (G4 733 still running 10.2.8)
G4 MDD 867, G4 Q'slvr 733 Mac OS X (10.4.8) also iBook G3 900 10.4.8 (G4 733 still running 10.2.8)

Thanks very much for the info. Kind of what I thought.
Re their price gouging - Ouch! A 66% markup from retail, and they're refurbished. I think I can wait a month or so... of course if those cards were dc'd, I might consider it. But I talked to a guy at ATI, and he didn't give any such indication.
I did find a GeForce4 Ti4600 (NOS) for a pretty reasonable figure at another site, but that's an older, slower card. I'm impatient, so I'm tempted, but I think I'd be kicking myself if I didn't wait for the better solution.
Are you saying that I won't really do any better in Classic with the ATI, compared to my stock GeForce4 32MB? Forgot to mention I'm using a 22" Cinema (ADC), if that makes any difference. And I'll be running Classic probably on top of Jaguar (I installed Tiger on a fresh new second internal drive). I thought I'd skip mixing Classic with Tiger altogether, but when I booted up the first time, there it was in Sys. Pref's. I guess it saw OS9 on the other drive during install. That's sort of funny.
I guess my question is mostly answered. Will put up the flag shortly.
Thanks again.
Mike

HT4098 Can you help me, i have a subscription for Elle, but i cant open the march one...it is just blank.

Can you please suggest how I an open a magazine, that i have paid for but what i tap the screen to view, it is just blank? Thank you

As 99jon said, if you bought it on disc you should have both versions (mac is on disc 3) and a serial number that works with both. However, if you bought a download, while you should definitely try your serial number in the trial, if that fails you will need to contact adobe sales (NOT customer support) for a crossgrade. Do this soon, because most people expect PSE 11 out shortly and once that happens you might as well just buy the new version, since you'd have to pay the upgrade fee for the crossgrade since they'd send you the new version (and for PSE that's usually more than the street price of just buying it from a big box store or amazon).

Firefoxx will not let me into my email. It keeps asking me for my password. I have not trouble getting my email in windows explorer. I am using yahoo email. Can you help?

I am unable to get to my email in yahoo. It keeps asking me to repeat my password. I am able to get to my email when I sign on to windows explorer but no fire fox.

If your computer was purchased less than 90 days ago, you are entitled to free telephone support from Apple. The period is longer if you purchased Apple Care and extended your warranty.
Apple Support Contact
Apple Support contact - Telephone
What OS are your running? If you can access your user library, you can go to Keychains/login.keychain and move it to your desktop. Restart and a new login keychain should be created. If successful, delete the one from your desktop.

Can you help me find my security code for PSE7?

I want to install photoshop elements 7 on a new PC, and discarded the packaging. When I went online, the product isn't registered, although I'm sure I registered it. I have the software installed on another PC, but don't know where to look for the serial number. I already looked in the registry, it's not there. Any other suggestions on how to retrieve my serial number? Thank-you.

Try running Belarc Advisor and see if that helps
http://www.belarc.com/free_download.html

Can you help me fix that mismatch account for google? I am trying to access a gmail.

Since I downloaded Mozilla Firefox, I went to google gmail. I have trying to access the gmail, but my google gmail mismatch cookies.

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; '''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.

For what ever reason I cannot locate my favorites, and cannot see my web browser on my firefox. My grandson used the computer yesterday and many of the usual thing are missing. Browser bar, favorites tools etc. Can you help

The line where the browser bar would ordinarily be is just a black space. My favorites list, browsing history and most of the firefox toolbar is missing.

It sounds like he hid the menu bar. Press either Alt or F10 to temporarily display the menu bar, then in the view menu select Toolbars, then click on "Menu Bar" in the list of toolbars to display it permanently. Active toolbars have a tick by their name. For more details see the [[menu bar is missing]] article.

Since I put Firefox as my webbrowser, I can't get google earth to work or windows media player when serching for album info and things like that and some other progams like these that acsses the internet it won't work. Can you help?

It just has trouble when a program is trying to open the internet.

It just has trouble when a program is trying to open the internet.

Can you help me fix my Microsoft office for mac?

This is the error I get.

Sorry you got the error. What can we do if you don't tell us something more useful. What version of OS X are you using? What version of Office are you trying to use? Did Office work in the past but isn't working now or is this a new installeation? Do you get the samething trying to use other Office applications?
Is there a reason you've posted this in the Servers and Enterprise Software WebObjects forum? Is this happening on an OS X Server system?

If I forgot my password to my iphone

I forgot my password to my iphone5 & when I cant hook it up to my old computer which I usaully use how can I reset it without using the sensory touch on the home button???

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

HT1212 hello i forgot my password for my iphone and it doesnt let me sinc it to my computer and i need it unblocked can you help me i am locked out for 60 mins

Similar Messages

Maybe you are looking for