HT1212 how do i restore my ipod touch its disabled

my ipod touch is disabled for 22000000 mins

If IOS-7 is NOT installed and you have NOT turned on "Find my iPod," do the following:
Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Otherwise, go here.

Similar Messages

  • HT1212 How can i restor my ipod touch? I forgott my password to...

    How can i restor my ipod touch? I forgott my password to...

    Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1212 how do u restore a ipod touch if u forgot the password

    i need help restoreing my ipod touch i forgot the password

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • How do i restore my ipod while its disabled and says connect to itunes but itunes said that it cant because it needs a password and also my home button is broken what can i do to restore it

    i cant restore my ipod because its desabled and it says connect to itunes. also itunes is asking me to put in a pasword but i cant and my home button does not work

    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Next use the method discussed in the following for placing the iPod in Recovery mode without buttons
    Turn on without Home/Power Button

  • HT1212 How can I restore my iPod touch 4G with white on the display when it has a passcode on it and I know it butI can't enter the passcode on it?

    My iPod touch has white on the display. I need to restore it, but I can't enter the passcode on it. Is there any other way to type the passcode and restore it when I know the passcode?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1212 how do i restore my ipod touch

    because i have forgotten my pass code but my sleep wake button dosnt work?

    Use this program to place the iPod in recovery mode and then restore:
    - PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Mac or PC
    The Firmware Umbrella - TinyUmbrella

  • How do you restore your ipod touch when disabled

    my grand daughter put a screen passcode on her phone and forgot it.  How do you unlock it so she can use it again.

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How do i restore my iPod touch to Factory settings?

    Been wanting to do buy a few things in  app but got that disabled and I forgets my  Restrictions  passcode. Can someone explain step by step how i can restore my iPod Touch to the way it was when i bought it? hate to do something and  make a mistake. What I should do before I starts the reset and what to do after, I already copied my pics and videos  and can re-add all my  songs again later.

    Be sure to read the article about what to do when you forget a restrictions passcode.
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How can i restore my ipod touch 4g (?) without passcode or itunes

    Hi and thank you for helping as this is urgent.
    I forgot my passcode for my iPod, and guessed it to many times so it got disabled.
    The problem is I don't have iTunes and can't get it on my laptop, but need to restore my device. Right now on the screen it has a photo of a USB cord, an arrow, and the iTunes symbol. So, how can I restore my iPod touch without my passcode or iTunes?
    Thank you SO much.

    Right now you can't without a computer. Once you get to a computer you can restore it using DFU mode.

  • HT1212 how can i restore a ipod that has been disabled with a different computer

    how can i restore a ipod touch that has been disabled with a different computer

    Restore it in Recovery Mode: http://support.apple.com/kb/HT1808

  • Please how can I restore my ipod touch 2g from a firmware that I own already on my computer and without any time need to download via itunes

    please how can I restore my ipod touch 2g from a firmware that I own already on my computer and without any time need to download via itunes

    You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabilng the prevent iPods,iPhones, and iPads from automatically syncing option.
    Next, authorize the new computer with your iTunes Account.  In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials.
    If possible, either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.  To do this, right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
    http://support.apple.com/kb/ht1766
    Now onto synced content such as music, videos, photos, etc.  For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases.  For all other nonpurchased iTunes content, see this older post from another forum member Zevoneer covering different software availbable to assist you with this task.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier.  Here is more on backing up and restoring your iPod.
    http://support.apple.com/kb/ht1414
    B-rock

  • How do you restore your ipod touch to factory settings?

    how do you restore your ipod touch to factory settings?

    Apple kiwiDid you notice that your link applies to:
    Learn how to restore iPod, iPod classic, iPod mini, and iPod nano to factory settings.
    For latina01
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HOW DO YOU RESTORE YOUR IPOD TOUCH

    how do you restore your ipod touch to factory settings?

    Connect the Device to the iTunes library you Usually Sync with, click on the Device tab that appears in iTunes and click Restore.
    Or,
    Settings > General > Reset > Erase All Content and Settings

  • HT1766 How do u restore your iPod touch 4g

    How do u restore your iPod touch 4g

    Connect iPod to iTune (computer) and tap Restore iPod.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202A/024df4f162b91bff98 5256e5025ff7f3_zps47521b28.jpg

  • HT1414 how i can restore my ipod touch

    hi. how i can restore my ipod touch?

    Are you sure you have a 3rd generation Touch?
    If it has Model No. A1288 etched into the back casing, then it's 2nd generation and cannot go beyond iOS 4.2.1
    You can check here; http://support.apple.com/kb/HT1353

Maybe you are looking for

  • Unable to login in sap development system

    When iam applying service packs, some has restarted the server. After restart the system everything is fine MMC is started. Database connection is ok. tp connection ok. Every thing is ok.  When iam trying to login sap system I entered ddic user 000 c

  • Problem with output from  report to excel, calling the report from form 10g

    Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database,

  • Error Calling Oracle Stored Procedure From Within Report

    Hi, I have a report that calls an oracle stored procedure which returns a ref cursor. The report is working ok in our development environment when called from our development website through .NET. When the report is moved and accessed from our UAT we

  • How to reset xsetroot message?

    How can I reset xsetroot message without rebooting? Logging out and shutting down X doesn't help.

  • Alv grid push button functionality

    Hi all,          I have a push button as one of the fields in fieldcatalog.i am using class cl_gui_alv_grid .   I want that when that push button is clicked then some action should take place. How can i get user action on clicking that Push button. p