HT1222 Is anyone having problems with iPhone Bluetooth to BMW s since iOS 6.1
Is anyone having problems with iPhone Bluetooth to BMW s since iOS 6.1?
Yes. I had an iPhone 3G and when upgraded to 6.1 the bluetooth connectivity failed progressively and eventually the phone just wouldn't connect. I broke and reestablished the pairing am few times and each time it would work for a while then disconnect to the extent I thought the bluetooth hardware in the car was failing. I then got an iPhone 5 and the same issue remained. In the last few days I've paired an old Blackberry with the car kit to rule out the BMW hardware. Blackberry is fine so it has to be iOS incompatibility.
Similar Messages
-
Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.
Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.
-
Anyone having problems with the Abc app no loading since it has been added?
Anyone having problems with the Abc app no loading since it has been added?
Hi Popalotofstyle,
Thanks for using Apple Support Communities. It may be worth trying a restart of your Apple TV to see if that allows the ABC app to load:
Apple TV: How to restart your Apple TV
http://support.apple.com/kb/ht3180
Cheers,
- Ari -
IiPhone 5s Bluetooth problem with Renault media Nav very poor connection, both phone and media Nav are up to date software is there a solution
Here we use MediaNav with iPhone4s, 5, and 5s. I use spotify to stream music, it works great. But each approx. 15s the signal drops for a moment.
I believe there is nothing wrong with the bluetooth connection of the iPhones, as I use them with other audio systems.
The link belows shows the following stated:
"There is a fault with the MediaNav Bluetooth connection when streaming music."
"Renault are aware of the fault and will not be telling any new customers"
"It is not a priority"
"There is no timescale for a fix"
http://www.shesaidbeauty.com/sammakeup/blog/renault-clio-medianav-bluetooth-faul t-830095 -
Is any one having problems with Iphone 4 s being slow after ios 7.0.3 update?
Any one having issues with this update. Phone was working fine untill this update. I am having low signal, goes inbetween 1x and 3g, apps slow to load if at all, apps crash and to top it off, heavy battery drain. I did not have any of this problem before 7.0.3 update.
See this discussion...
https://discussions.apple.com/message/23731048#23731048 -
When receiving a call, my phone only vibrates once even if its on silent or not. I have checked all the settings and all appears ok. It works sometimes and doesn't other times. Does anyone know how this can be fixed?
ThanksMaybe your buzzer gets stuck when it vibrates? Try playing it by creating a custom vibration. Does it keep working properly then?
If that works, try setting up another vibration that should be played when someone calls you. -
Hi all. @I'm new here , just updated my iPad 2 to iOS 8.1.2 and PE app has stopped reading my streamed photos. Anyone has the same problem? thanks.
I don't have an iPad 2, but I just tried on iPhone 6 running 8.1.2, and I can access images in my Camera Roll, and also images in iOS Albums.
Are you running PS Express version 3.4? Does uninstalling/re-installing help?
Does PS Express have permission to access the images, under iOS Settings > Privacy > Photos > PS Express?
If these suggestions don't help, please reply back. -
im having problems with iphone 5 it keeps goin to recovery mode, i have the latest update already installed but it keeps goin to recovery every two day. can anyone help me on hoe to fix this issue? thanks
Try to Restore with iTunes on your computer. If this does not work, there is full Warranty. Make Genius reservation or set up service and take or send to Apple for resolution.
-
HT1766 anyone having problems with the start button
Is anyone having problems with the Iphone 4 start button not working
What is the start button?
Do you mean the on/off button, or the Home button?
If either one is not working at all, more than likely there is a hardware problem. -
Anyone having problems with the on/off switch
anyone having problems with the on/off switch. It sometimes does not work, I occasionally have to pull the plug out and replug then hit the button and it goes on?
Out of the 100+ millions of iPhone, I'm sure there are many people that have that same problem. If you do, you have a 1 year warranty... take it in before it runs out.
-
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...
hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!
-
Anyone having problem with the iCloud lately
anyone having problems with iCloud sending from iPad to windows computer within the last week?
I am having similar problems. iCloud has been working great between my Mac and iPad, but within the last week, when I save a Pages doc (via my Mac) onto iCloud, it doesn't show up for me to retrieve on my iPad. All my settings seem to be correct, and there are still plenty of other docs on iCloud that I have previously saved, but these new ones will not show up. I have plenty of space left, so that is not the issue...
-
hai ian having problem with iphone 4 is suddenly shut down automatically when it is near 2 30-50% can u plz tell soutions for that plz
This is most often due to faulty battery. Apple Genius can perform a quick several minute battery diagnostic test. Make Genius Reservation.
-
Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?
I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck
Maybe you are looking for
-
Activating a vi on a remote computer (and transferring the data back) via a TCP/IP connection
Hi all, I need some help in creating a vi that can be activated remotely using a TCP/IP connection. Can this be done. If it can, I have a vi (that would be on the remote computer) that manipulates the data as required and saves the data file. While t
-
Hi ALL I would like to have different payment terms for each line items in same purchase order. How to achieve this?
-
Dynamic Variant for Date Range
Making the Variant for Date or Date Range Dynamic in the Selection Screen of any Program. There are actually many ways you can make the Variant for Dateu2019s Dynamic. 1. Providing he Values in the Variant Variables. 2. By creating the variab
-
Need to call up a webservice created in external system from SAP
Hi folks, A web service is created in the external system and I need to access this web service from a BADI. Can you tell me how can I call this web service (the external system is giving me a URL) and how to capture the return value from the web ser
-
I have a problem creating a Vi.i need to write the data and show it on the front panel,but when another data come in it keep overwritting my previous data.help pls..