HT1222 My internet speed has slowed to a crawl after installing security update 2015-003.  Any ideas on how to fix?

I have a mini mac with 8GB ram and running yosemite OS. I recently installed security update 2015-003 and now my internet connectivity have slowed to a crawl. sometimes if I turn wi-fi off and then back on the speed returns to normal but sometimes it does not.   Any ideas what may be causing the slow internet speed?

Please check the speed of your connection on this site.
Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results.

Similar Messages

  • Ethernet has stopped working after installing "Security Update 2010-003"

    I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange". The wifi still works.
    Has this happened with anyone else? I am curious as to how I can either uninstall the update or make the ethernet work again..
    Much thanks for any recommendations you may have.

    Hussain Ameen wrote:
    I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange".
    Welcome to Apple's discussion groups.
    I'm not having that problem after installing the security update.
    If you open the Network panel of System Preferences and select the Ethernet connection item, is it set to "Configure" "Using DHCP"? Do you see reasonable values for "IP Address", "Subnet Mask", "Router", and DNS Server"?

  • I have moved to the country where my internet speed is slow.  I am running some auto updates that keep timing out half way through.  Can the time out be shut off to complete the update?

    I have moved to the country where my internet speed is slow.  I am running some auto updates that keep timing out half way through.  Can the time out be shut off to complete the update?

    bondod wrote:
    Can the time out be shut off to complete the update?
    I'm not sure about that. But what you could try is to set the Update Preference to "Manual" and try updating at a time when the Network may not be as busy, like late at night or early in the morning. 
    Just an idea.

  • Selected from my iphone "Buy more ringtones"and it has dowloaded as a music file how do i get it to be a ring tone which is what should have happened.  Any ideas on how to fix this?

    selected from my iphone "Buy more ringtones"and it has dowloaded as a music file and is now in itunes on my laptop and in music on my iphone. How do i get it to be a ring tone which is what should have happened in the first place.  Any ideas on how to fix this? As in itunes I cannot see how to a) change it to a ring or b) drag across to the right area...
    I simply followed the prompts on my iphone 4s and would have expected it to end up as a ring tone.. any help, guidance, advice welcome...

    selected from my iphone "Buy more ringtones"and it has dowloaded as a music file and is now in itunes on my laptop and in music on my iphone. How do i get it to be a ring tone which is what should have happened in the first place.  Any ideas on how to fix this? As in itunes I cannot see how to a) change it to a ring or b) drag across to the right area...
    I simply followed the prompts on my iphone 4s and would have expected it to end up as a ring tone.. any help, guidance, advice welcome...

  • HT1212 My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this pro

    My Iphone 4 has been stuck on a loading symbol for a week now, I've plugged it into the computer but can't do anything still because it says I need to put my pass-code in, but I can't the screen is on loading still! Any ideas on how to fix this problem?

    On the new laptop, launch iTunes. From the menu bar click Store / Authorize This Computer.
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

  • HT4972 I have a G3 iPhone and it has recently dropped it's wi-fi ability.... any suggestions on how to fix this would be greatly appreciated. thanks

    I have a G3 iPhone and it has recently dropped it's wi-fi ability.... any suggestions on how to fix this would be greatly appreciated. thanks

    G3 - 3G whatever!!! you get the point.....
    and no my dyslexia is not the issue therefore constitutes no need for comment from anyone.....
    this is what happens when one studies a foreign language such as Japanese.
    Re: your suggestion to resolve my issue: I've done all of this already, 3 and more times... to no avail.
    but thanks for trying to help.

  • My iphone 5c has stopped synching with my pc using calender thru microsoft outlook, any ideas on how I can get my iphone to synch with my calender on my pc in outlook again

    my iphone 5c has stopped synching with my pc using calender thru microsoft outlook, any ideas on how I can get my iphone to synch with my calender on my pc in outlook again

    Hello leighfromgold coast,
    Thanks for using Apple Support Communities.
    If you're having issues with syncing your Outlook calendar with your iPhone, then please follow the troubleshooting in the article below.
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    Cheers,
    Alex H.

  • Network traffic slowed to a crawl after installing RV325

    I hoping someone can help me.  Yesterday I installed an RV 325 on an existing network to replace a netgear router.  Now traffic has slowed to a crawl. 
    Initially I had both the Domain Controller and the switch that all the PCs are connected to both connected to the router.  I could not transfer even the smallest file from the server to a PC without it timing out.  I solved this by moving the domain controller to the switch so that the router is out of the loop.  Now local traffic is back to full speed but internet traffic is still extremely slow.
    Email, downloads of files and general browsing are all extremely slow.  A speed test  shows a ping of 8ms, download 0.57ms and upload of 3.18ms.  The ping and upload are normal, the download is not.  I've tried rebooting the router but that seems to make no difference.  I'm on firmware version v1.1.1.06.
    HELP!

    I have an internet connection that does 200mbps. My ISP has an internal speedtest (to guarantee that "nothing internet" comes in between and you are testing the "LAN" connection). With my laptop connected directly to the modem I get 185mbps. With my old router (100mbps port) I get 80mbps. 
    Hoping for awesome results - since I specifically bought it for its gigabit wan ports - I ran the test again with the RV325 in between. The download speed stalled at 25mbps! (So for clarity: 1/8th of the max speed and 3 times slower than my previous router).
    In bandwidth management I've changed both up and downstream numbers to 1.000.000 (it won't go higher) and I do not have any rules. This does not help a bit. 
    The port is connected @ 1gbps to my modem, my laptop is connected  @ 1gbps to the router and I'm running firmware 1.1.1.06
    I really hope there is something I missed here, because I'm greatly disappointed so far. 

  • Processing time has slowed to a crawl since install of ViewSonic monitor.

    All processing functions have slowed to a crawl since I installed a ViewSonic monitor VX2270Smh-LED.  The system recognized the monitor immediately.  It is connected through the Mini-DVI port on the MacBook Pro and through an adapter to the DVI port on the monitor.  I have the displays configured as one very wide monitor so I can move windows back and forth.  It doesn't seem to matter what I am working on, browser, spreadsheet, email, every command results in the spinning wheel.
    Have looked for a driver for the ViewSonic but they don't make them.  Is there something available with Apple that will help this?

    To isolate whether the monitor is really the culprit I would run a benchmark without the monitor connected and with.
    You should rely on the numbers from the benchmark to tell whether there is a difference.  Perception can be a very dicey thing.
    I have used xbench:
    http://xbench.com
    Once you have performed the test in the two cases (not other applications running) report back here the results

  • I have just downloaded icloud, the files are in the directory but it has not loaded. My pc is vista home 32 bit any idea's how to resolve this please?

    My laptop is running Microsft Vista Home Premium 32 bit and I have downloaded iCloud but whilst the files are in the directory it has not loaded so its not available in the start menu. grateful for any ideas or suggestions?

    Have you installed it yet (download is step 1)

  • My iPhone has suddenly started sending texts from email address. Any ideas on how to fix?

    Hi my iPhone has just started sending texts from email account. This only happens when the text is sent to other iPhone users. Weirdly it jumps between normal text address and back to email. Any ideas?

    When I turn iMessage off, it sends from my phone number.  When I turn it back on and check the caller ID, it has my phone number checked, however, when I start texting again, people are still receiving the messages from my email.  Any advice?

  • My internet speed has slowed down since getting the 1TB time capsule---why?

    I had the Linksys wireless G router with speedbooster, now that I have replaced it with the TC, my internet is slower than before. I often have to hit a link several times just to get it to go through. What is the problem? I've tried switching channels between 11 and 6, but nothing changes. I have to macs with wireless N capabilities and 2 PC's that use "G".

    I've even shortened the name of the TC.

  • Safari has slowed to a crawl after upgrading to 4GB memory and installing Mavericks

    Before I upgraded my MacBook I used Snow Leopard. Despite my slow broadband with Safari I could get a list of possible answers in a couple of seconds. Now with Mavericks it can take 4-5minutes for a page to load then another 4-5 minutes to read the page. Can anyone help?

    Please check the speed of your connection on this site.
    Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results.

  • I have a iPhone 4s.  When I play a podcast, the audio is speeded up. like playing a 33 record at 45 rpm.  This doesn't happen with music.  Any ideas of how to fix this?

    I have an iPhone 4s.  When I play a podcast, the audio is speeded up, like playing a 33rpm record at 78 rpm.  This doesn't happen with music.  How do I slow it down?

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Has anyone seen the below error before? Does anyone have any ideas on how to

    go about troubleshooting it? I am using a PCI-GPIB card on a WIN95 machine in an attempt to communicate with an
    ESP300 Universal Motion Controller ver 3.03. which reponds to ASCII commands.
    As a basic first step (using LabVIEW 6.0.2) I first attempted the example on p.20-6
    of the LabVIEW ver 6 Measurements Manual. I passed the string "*IDN?".
    I get the following error from the Simple Error Handler:
    Error -1073807339 occurred at VISA Write in esp300_scott1_mod4.vi
    Possible Reasons:
    VISA: (Hex 0xBFFF0015) Timeout expired before operation completed
    In a second attempt I tried using LabVIEW version 5 with the example on 8-12 of the
    User Manual, here I g
    et the same error from the Simple Error Handler:
    Error -1073807339 occurred at VISA Write in esp300_scott1_mod4_ver5.vi
    Possible Reasons:
    VISA: (Hex 0xBFFF0015) Timeout expired before operation completed
    N.B.--> I have successfully used NI's Measurement and Automation Wizard to communicate
    with the instrument. When I pass the string *IDN? I get the response:
    ESP300 Version 3.03

    Your best VISA troubleshooting utility is the VISA Interactive Control (nivisaic.exe). From this utility, you can use the VISA protocol to communicate with each of the VISA resources available on you system. If you are unable to get this utility to properly recognize or use your NI-GPIB card, It may be suggested to uninstall/reinstall the NI-VISA distribution. If you can get the utility to work then there is a programmatic problem which you must address. Debugging programmatic issues is best troubleshot using the VISAIC utility, NI-SPY (nispy.exe), and highlight execution. If you can outline a flow from within VISAIC, using NI-SPY you can log this flow and attempt to emulate it from within LabVIEW. Make sure each of the functions has the proper inputs. Also, try usin
    g some of the VISA/GPIB examples shipped with LabVIEW.
    Ryan Mosley

Maybe you are looking for

  • How do I remove the graphics card of my computer from the blacklist?

    I want to activate Adobe Flash Player hardware acceleration, but my card is blacklisted, and reproduces any other content without any instability, but she was put on the blacklist, and not is because, and not worked before in older versions, but with

  • OBIEE Subquery Join

    Hi All, I am able to join 2 reports using 'Filter Is Based on Results of Another Analysis' based on e_id and m_timestamp to build report for below query select a.e_id ,count(distinct a.m_timestamp) from raw_data a, ( select count(*),e_id,m_timestamp

  • I want to use Java for dynamic web programming...

    And don't know what to learn, JSP or servlets or both. I'm guessing it would be best to learn both, but I don't want to buy two books. Are there any books that teach both fairly well?

  • How to specify the Process Flow Module with SQLPLUS_EXEC_TEMPLATE.SQL ?

    Hi, we have a couple of process flow modules that have PF Packages and Process Flows with the same name. E.g PFMOD1 (Module) FILELOAD (Package) PF1 (Pf) PFMOD2 (Module) FILELOAD (Package) PF1 (Pf) Normally we can specify "FILELOAD/PF1" as a paramater

  • Websphere setting for Hot code replace

    hi , these days i need to build my code everytime i make changes ... previously it was working well ...... i went thru some changes in env .....as there were new addition of MDBs etc in my projects ..... i m using WSAD 5.1.2 ....... i have checked th