HT1338 After upgrading to Mountain Lion iphoto doesn't work

Can't open my iphoto after upgrading to Mountain lion.  Goes up to step 2 at 54% and crashes.  Please help!

You can't run Windows on a Mac unless you use BootCamp or a third-party utility such as Parallels Desktop.
Perhaps you mean Microsoft Word (which is part of the MSOffice suite).
Only MSOffice 2008 and later will run in Mountain Lion.
However there are very good free alternatives, such as LibreOffice.

Similar Messages

  • After upgrading to Mountain Lion, Windows doesn't work

    Hello,
    I've just upgraded my computer to Mountain Lion (from Leopard) and Microsoft windows 'the Power PC applications are no longer supported'.  I've tried to download different version of Microsoft windows - still doesn't work.  Help!?
    I'm aware that this question may have been posted but somehow can't access the main community room.
    Thanks
    Odyle

    You can't run Windows on a Mac unless you use BootCamp or a third-party utility such as Parallels Desktop.
    Perhaps you mean Microsoft Word (which is part of the MSOffice suite).
    Only MSOffice 2008 and later will run in Mountain Lion.
    However there are very good free alternatives, such as LibreOffice.

  • After upgrading to Mountain Lion Quicktime doesn't work

    I have a 2009 macbook pro and just updated to mountain lion and now all my limewire movies that are in AVI format wont play on quicktime but they will play on FLV. I didnt have this problem before i upgraded.
    any help would be great!

    You can't run Windows on a Mac unless you use BootCamp or a third-party utility such as Parallels Desktop.
    Perhaps you mean Microsoft Word (which is part of the MSOffice suite).
    Only MSOffice 2008 and later will run in Mountain Lion.
    However there are very good free alternatives, such as LibreOffice.

  • On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

    On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
    They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
    do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
    I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
    Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

    Hi,
    When you start Messages fro the first time you are asked for an Apple ID
    When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
    The App should have also picked on on those iChat Accounst you had before.
    These should be Enabled if they were when you last used iChat.
    Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
    In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
    Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
    This will give you separate iChat type Buddy lists.
    You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
    You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
    I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
    There is no Buddy list for iMessages side
    No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
    Obviously an Apple ID can be an email or look like one.
    In some cases they are also valid AIM Screen Names as well.
    In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
    11:31 PM      Saturday; August 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT1338 after upgrading to Mountain Lion the HP printer drivers for my C4680 are not found on the Mac store (per my Mac Book)

    My computer cannot install a printer after I upgraded to Mountain Lion. I have downloaded the HP printer drivers from the Mac Store. I click on add printer on Print and scan, the printer is connected via USB. I get a message that the drivers on not on Mac Store and cannot be installed.

    True, not part of the list.
    An older printer? You can only try contacting HP. Note that Apple is only the "distributor" of these drivers; HP as the vendor develops them. Or not...

  • After upgrading to Mountain Lion, launching iPhoto reboots MBP

    After upgrading to Mountain Lion, when I go to launch iPhoto, my MBP re-boots.  This happens every time I try to launch iPhoto.  The re-boot has occured randomly when using Safari and iMovie.  Looking for help.

    I was hopeful thAt this would help, but it did not.  Still experiencing the same behaviors.

  • IPhoto Library won't open after upgrade to mountain lion

    One of my iPhoto libraries (stored on a WD Pasport Studio) won't open properly after upgrade to Mountain Lion 4oo5 open ok. One opens but disc symbol keeps spinning and Iphoto stops responding. Any ideas?

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

    Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
    My iphoto was working with photostream and now it will not connect at all.
    I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
    help!

    FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

  • ITunes doesn't sync iCal with iPhone after upgraded to Mountain Lion

    iTunes doesn't sync iCal with iPhone after upgraded to Mountain Lion. I even tried to use Replace Information On This iPhone and it doesn't work. Any idea guys?

    I'm having the same problem. It's as if my iPhone and MacBook Pro now have two separate calendars.
    Basically, I have a MacBook Pro (Mountain Lion, 13", late 2011) that I sync via USB with an iPhone 4S (iOS 5.1.1). Before upgrading to Mountain Lion, all of my iCal events would sync flawlessly. But none of the events I've created in iCal (Calendars) since upgrading have synced to the iPhone. Likewise, no new events that I create on the iPhone Calendar will sync to iCal. Also, changes to an existing event (even one created before upgrading to Mountain Lion) don't get synced either.
    Everything else seems to be syncing just fine though (music, apps, contacts, etc).

  • After upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer or even off my iTunes library

    after upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer, love film or even directly off my iTunes library. in each case, all i get is a black screen and no error message.

    Hi, i had the same problem and tried this,
    Somehow iTunes is tied to Safari. Try this:
    Someone mentioned to clear all website data and history in safari, stupid but it was either this or the below that fixed it
    or this,
    Disable Wi-Fi Networking Services
    Many users have reported that they’ve solved their issues by disabling Wi-Fi Networking under Settings > Privacy > Location Services > System Services. This only relates to your location being used for Wi-Fi Networking, so it doesn’t disable Wi-Fi entirely.
    Please let me know if it works.

  • After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

    after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Connection issues after upgrade to Mountain Lion

    Very strange internet connection problem here after upgrade to Mountain Lion.
    I just upgraded MacBook (early 2009) to Mountain Lion. After upgrade, I'm having problems connecting to certain websites (ESPN, CNN, etc.), and I can't connect to the computer using LogMeIn.
    BUT, I do have an internet connection. Skype works, Messages works, email works, some websites work. I tested using speedtest.net and it shows good download speed, but the upload speed is so slow that it can't even perform the test. A Windows PC on the same network works fine.
    Next, I tested the MacBook on another wi-fi network at a coffee house, and everything works fine there!
    So it might appear to be something wrong with the router? I have an Cisco (Linksys) E3200 and have upgraded to the latest firmware (1.0.4). But still doesn't work.
    The firewall in Mountain Lion is turned off, and I temporarily turned off the firewall on the router and that didn't help, so doesn't appear to be any sort of firewall issue. I've never heard of an operating system being incompatible with a specific router anyway.
    Can anyone thing of any setting or something in Mountain Lion that would causing internet connection problems with a specific router?

    I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
    Clinton

  • Dashboard widget with streaming video breaks after upgrade to Mountain Lion

    Hi.  I recently upgraded from Snow Leopard to Mountain Lion.  Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera.  When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg". 
    After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge.  After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
    Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too.  (I did make sure that, where needed, the username/password for accessing the video are included in the URL.) 
    I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up.  So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
    Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
    Thanks,
    Chris

    Hi James
    I have exactly the same problem with the same "Loading clip" then blank.  I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done.  By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this.  I never had a streaming video while  I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion.  I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
    I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu".  Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
    I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
    Have you come any closer in your research?
    I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
    trelements

  • ITunes movie playback, audio and video not in sync after upgrade to Mountain Lion

    After upgrading to Mountain Lion I have problems with iTunes movie playback, and the audio/video at times stalls/delays, or skips a few seconds, or even gets out of sync.  I feared this problem was isolated to my machine until I saw an article online: http://reviews.cnet.com/8301-13727_7-57489874-263/sound-stuttering-after-mountai n-lion-installation/.  I have 2011 iMac 27" with 16G RAM and am running the latest iTunes and Mac OS X software, and shutting down extra programs doesn't help.  Please let me know of any solution.

    I also have this problem, and some videos will no longer play in iTunes.
    I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
    Unacceptable! This hardware and software is too expensive to have these performance issues.
    2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

  • Application quit unexpectedly after upgrade to Mountain Lion.

    Hi, Please help. after upgrade to Mountain Lion 10.8.1 my iPhoto keeps quitting unexpectedly, then after upgrading to 10.8.2 yesterday, now almost most of my application which I used todays quits unexpectedly, this includes my broadband connection. I plan to fallback to Lion, but paying $20 for OS that causing me so many problem is not worth it. Anyone can help me to resolved this? Thanks in advance..

    Have you tried booting into the Mountain Lion Recovery Partition by booting while simultaneously holding down the Command - R keys?  You can repair the main Mountain Lion partition disk from there by using "Disk Utility" from THAT location.  Select the Macintosh HD in the column by highlighting it and selecting "Repair Disk".  Then I would run "Repair Permissions" twice.  That may solve your problems.
    Hope this helps

Maybe you are looking for

  • Need help merging these two files togehter

    I have the following class files one reads in a file another creates a file, Can somebody help me put the two class files together so i have one file which creates a file and reads it in, as i am stuck as to which bits need to be copied and which bit

  • Aperture 1.1 Update still has IE Issues

    Hi, Looks like web photo galleries in Aperture 1.1 are still having some pretty severe formatting issues in Internet Explorer for Windows (any version). Will this ever get fixed? We know IE for Mac is dead, love Firefox and Safari but many clients ar

  • Using find my iphone when I only own that device. Where to access?

    How can husband use Find My Phone. Only has iphone. I have the other devices? Two different apple id's? Can he still, find his phone?

  • Airport Express 1st gen A1264 can't be seen in Airport Utility 6.3.2 in OS X 10.10.2

    I have acquired a 1st gen 802.11n airport express base station and I am trying to set it up through Airport utility but no matter what I try It won't recognize the device. I am using a 2014 MBP w retina display, 2.8 GHz Intel Core i7, won't be get pi

  • How to activate my Include file

    Hi, I have an main file whish has a variable declared, we are using that variable in another include file, when i use that variablein the second include file and tried activate the second include file. It comes out with an error saying that 'variable