HT1338 can apple remote desktop 3 access my pc work desktop?

can apple remote desktop 3 access my pc work desktop? Do I have to get microsoft office 2011 in order to do this?

Microsoft Remote Desktop Connection Mac OS X Client (free)
<http://www.microsoft.com/mac/products/remote-desktop/default.mspx]]>
Applications -> Remote Desktop Connection
Computer:  windows.pc.address
-OR-
Computer:  windows.pc.address/console
Microsoft provides setup instructions on the web page where you download the RDC client.
-OR-
CoRD (Microsoft RDC Screen Sharing)
<http://www.macupdate.com/info.php/id/22770/cord>
-OR-
You could also install a VNC server on your Windows system and use a VNC client on your Mac

Similar Messages

  • Can apple remote desktop be used to assist someone with cognitive disabilities to type on a computer in a different city?

    Question:  Can Apple Remote Desktop be used to assist someone with cognitive disability to type on an Imac in another city?

    You can read about the features of Apple Remote Desktop for yourself and decide whether it would be of help:
    http://www.apple.com/remotedesktop/
    I can't see how it would help anyone type on a Mac, remote or not, disability or not, but perhaps you have assistance in mind that I'm not envisioning.
    Regards.

  • Can Apple Remote Desktop Client 3.8 be used by hackers to hack into my account!

    I received an update from Apple to  install the Remote Desktop Client 3.8 and am now wondering if hackers can use this software to control my laptop!

    Don't worry!  First off, you already have Remote Desktop Client on your computer.  The update is just an update from 3.7 to 3.8.  It's a component of the operating system and does not give anyone remote access to your computer unless you have configured it to allow access.  Even then, the remote person or computer needs to be given access to an account on your device or know your credentials to initiate connections.  At the very least, you are making your computer MORE secure by keeping the remote client updated, not less, as the update may contain security related fixes to the client.

  • Can Apple Remote Desktop route audio to selected computers across network?

    Can ARD be used to route audio output (e.g. from iTunes) across the network? If not, suggestions would be appreciated.
    I remember that there was a -display option on Unix commands that let us run applications remotely and wondered if that might be a start to getting this task to work.
    The intention is to feed audio-streamed data out to networked iMacs for use during classroom tests, controlled from a central admin computer in a different room. None of the classroom iMacs in question have iTunes on them, since it was removed to keep the machines more focused on classroom activities.

    Sorry but no, ARD does not support audio across the network in any form.
    Airfoil supports streaming of audio to other computers. I don't know if it will stream to multiple computers simultaneously, but you could check.
    Regards.

  • Can Apple Remote Desktop force a client to netboot?

    Is there a way that ARD can make the machines boot directly to netbooting, without having to visit each machine and holding down the "N"?

    Yes, in the Manage menu there is an option to set the startup disk. If you are on the same lan, you can just highlight the correct netboot session. Or you can give it the netboot server address.

  • Can Apple Remote Desktop Slow Internet Speed?

    After I used ARD to open a program on 36 stations in our computer lab these workstations have been really slow on the internet.  We are using Snow Leopard 10.6.3 and ARD 3.4.  We are using Ethernet connections, and have Airport turned off.

    TeenTitan,
    Thanks for the post. I was loading a learning software called KeySills from Sunburst. It is a huge program that loads into workstation memory from our server. All Internet is sluggish since we tried to open this app on 36 network stations at once...but more noticeable on more demanding websites that load interactive graphics or video etc. We used to be able to load the program on all 36 workstations, but now if we load it on more than a couple, it is unbearably slow to load. Once loaded it's fine.  Other workstations load the program in 20 secs whereas the 36 take 50+ seconds to load it (and even longer as more load at once). I've repaired permissions and reset cache to no avail. I'm considering creating a snow leopard station from scratch, then if it loads in 20 secs, I'll reimage the 36 stations.
    It's not the network cuz I plugged one of my 20 sec loaders into port where slow ones were and it still loads in 20 secs. Also, slow ones moved to spot where 20 second loaders were and still takes 59+ seconds.
    It'd really be nice if I didn't have to reimage 36 stations ;)
    Thanks for any suggestions you have.
    Tara

  • How can I remotely access my computer from a different location on Apple Remote Desktop?

    I downloaded Apple Remote Desktop and am trying to access our computer at our church that is in the auditorium and work on slides for ProPresenter from my office which is on a different network. The Mac Pro, which is in the auditorium, is connected to a Netgear wireless router. I would also want to be able to have access to observe and control the screen on the Mac Pro whether I am in my office or at my house. I have tried everything from going to portforward.com, followed those instructions, did port forwarding, used ipchicken.com to get my external IP and made sure that the Mac Pro had a static internal IP address and made sure the computer had access for remote management. Any help to resolve this issue would be greatly appreciated! Works fine when it is on the same wireless network, but I need access being on a different wireless network. Thanks!

    Hi austinmac14,
    So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
    That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
    If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
    Also these steps are so one person, can connect to one computer at your work.
    Open Airport Utility:
    go to the dock
    Click on the finder
    go to the menu bar
    Click on the "Go" menu
    Chose "Utilities" from the "Go" Menu
    double Click on "AirPort Utility"
    Access the Base Station:
    Double Click on your Airport Extreme BaseStation that is your internet connection router.
    a new window should pop up with your Airport Base Station as the Window Name
    Configure Static Address for the computer you want to connect to via ARD:
    Click on the internet Icon from the toolbar
    Click on the "DHCP" tab
    For "DHCP Reservations:"  Click on the "+" button
    For the "Description" put "ARD"
    For "Reserve Address by:"  set "DHCP Client ID"
    Click the "Continue" button
    For "DHCP Client ID:" set "ARD"
    write down the number in "IPv4" address field
    Click the "Done" Button
    Configure routing to ARD computer:
    Click on the "Advanced" icon from the tool bar.
    Click on the "Port Mapping" tab
    Click on the "+" button
    for "Service:" Chose "Apple Remote Desktop"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Apple Events"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "+" button
    For the pulldown menu "Service:" Chose "Remote Login - SSH"
    for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
    Click the "Continue" button
    Click the "Done" button
    Click the "Update" button.
    wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
    Configure the ARD computer to use the correct IP address:
    Go to the computer you want to be able to remotely connect to
    On that computer, Go to the menu bar
    Chose the "Apple" menu bar
    Chose "System Preferences…"
    Click on the "Show All" button
    Click on the "Network" icon
    For the active network connection, (the connection on the left side with the green dot), click on it
    Clock on the "Advanced…" button
    Click on the "TCP/IP" tab
    for the "DHCP Cient ID: field put "ARD".
    Click the "OK" button
    Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
    Find out what your public internet IP address is.
    On the computer you wish to connect to over the internet, gotohttp://whatismyipaddress.com/
    when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
    At this point you should be able to connect to the computer remotely
    connect to the internet from another location.
    open Apple Remote Desktop
    go to the file menu
    chose connect to computer using ip address
    set the address to the address to the IP address you wrote down for step 6. 2.
    use the same password as you used to connect to the computer at work using ARD.
    So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
    Also some network connections change.  When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
    Of corse there are ways around this. But that's kind of another conversation.
    Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
    ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
    This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT5306 I do not want to give remote access to anyone but myself as privacy is my friend.  Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only?  What if I do not update? compatibility issues with wh

    Hello:
    Thank you for the update for remote access for desktops.
    Personally, I do not want to give remote access to anyone but myself as privacy is my friend.  Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only?  What if I do not update? I do use this lap top in other countries.  compatibility issues with what?

    Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
    If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
    Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

  • How can I improve the performance of Apple Remote Desktop?

    Apple Remote Desktop is very slow (refresh of the screen). Hown can I improve speed?

    Like Dave said, you can lower the colors. You can also set a lower screen resolution on the client your connecting to.
    There are things that can slow down ARD. For instance: copying files over the network, Watching youtube, listening to streaming music, Downloading files, video chat, audio chat. Or an active time machine backup running to a time capsul. 
    If you have the option of using your wired network over wireless. And your wired network is faster; then you could try using the wired network.
    If your computer and or the client computer is on wireless, you could try moving the computers closer to the wireless access points. Do the computers have 1 bar , 2 bars, 3 bars or 4 bars in airport menu?
    Are you using ARD at home on a small network? OR are you on a larger buisness network?
    If your on a small home network. You could look at your router to find out if it's 802.11 a, b, g, or n.

  • How Can I Control a Windows PC from Apple Remote Desktop Please?

    Hello Everybody
    Please excuse my bad English.
    I would like to ask you, how could be possibile setup windows pc (XP or 7) to be controlled by a Mac with Apple Remote Desktop 3.7.2
    I think I have to use VNC, but how can i SETUP to connect XP or 7 to my Mac Apple Remote Desktop in the same LAN?
    Thanks a lot
    Giovanni

    You can use ARD to remote control a windows machines, ARD is built on VNC
    You'll have to install a VNC server on the windows machine you want to access
    You won't be able to use most of the ARD features as they are specific to mac
    You'll be be able to see and control the desktop and that's about it
    You can also find VNC /Remote Desktop apps in the iOS store that will allow remote desktop connection from iPad /iPhone,
    There is a mac version of Microsoft remote desktop in the Mac App Store

  • Apple Remote Desktop Can't Connect to an Xserve running 10.5

    I was upgrading an Xserve with dual G5 processors from OS-X serve10.4 to 10.5. I've got a keyboard and monitor plugged into the Xserve. Apple Remote Desktop v3.5 can't connect with the Xserve. File sharing on the server is checked to allow it. The ARD ports seem to be open on the server. .When ARD scans our network computers, the Xserve says Access Denied next to it. When I try to connect it says something like "Unable to Verify." Any ideas what the issue might be?
    Thanks

    Well the File Sharing service would not have anything to do with remoting in.  Have you checked Remote Managed and checked to see if the accounts listed with access have everything checked off?
    Did the local admin password of the server change?  Can you ping the server?

  • ARD&TC Apple Remote Desktop & Time Capsule (disk access, remote management)

    Hello!
    Could You help me? I have two problems with access to my Time Capsule.
    I have wireless network at home based on Time Capsule, with *one static IP*. I have conected it (wireless) with two iMac's. Me and my girlfriend we have also two macbooks and when we are out of home we want to acces data on our Time Capsule disk. I need access to disk to edit data on it while being long way out of home. Second problem is to access data on our iMac's. I bought Apple Remote Desktop software, it's incredible what it can do but only when I'm connected to my wireless network LAN. I need to control my iMac while being out of home. How to configure Time Capsule and ARD to acces disk and control iMac's? Let me remind You that I have *one static IP for Time Capsule router WAN*. Please help and I would be very very thankful for screenshots of configuraion, I'm newbie in this.
    Thank You very much.
    Kind regards.
    Adam Milwiw-Baron

    Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
    Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

  • Can't get Apple Remote Desktop to work

    I cannot get apple remote desktop to recognize my lab computers.  It only recognizes one in there and all the info is the same on the others.  It sees them but it says they are offline when I have them all on and ready.  I did an update to make sure they were up to speed. I am running ARD 3.5.2 on mine and 3.5.2 on the snow leopard macs and there are some just leopard macs in there running 3.4.
    Thank you in advance.

    Sorry, but no, ARD does not have a "remote printing" feature. You can use ARD to copy a file to a remote Mac and than take control of that Mac to print the document, but you cannot print directly to the remote Mac (unless someone else here knows a trick I've not discovered).
    Depending on how your wife's company has things set up in their connection to the Internet, she may be able to just set up printer sharing on the work computer and print directly without needing ARD at all. A utility such as Slink may make that easier:
    http://slinkware.com/
    I use Slink and it works quite well.
    Regards.

  • How can I deploy my AAMEE without Apple Remote Desktop?

    Hi everyone,
    I created a build for Adobe CS6 Production Premium for Mac with the serial number embedded, along with the current updates. All is well with that; however, this is the issue that I am having:
    I have tried to test the build on a local machine (the computer I created the build on) and was able to install the package with no issues; however, when I try to deploy build onto a networked machine, it doesn't work.
    I have read through the AAMEE Reference Guide and have read (if I am not mistaken) that for CS6, you can only deploy an AAMEE build through Apple Remote Desktop onto multiple machines. I have also read that you would need Apple Remote Desktop on all of the machines you want the build to deploy on.
    If that is case, if I have read the guide correctly, what is the point of deploying the build through a network if you have to still install ARD onto all the machines you want the software one? How can you get around this to be able to deploy your AAMEE successfully onto a network on machines?
    When I tried it last night on one network Mac with ARD, I received the error message for "Validating packages...". I'm not sure what that means because the build works perfectly on local machine.
    Any ideas would help as far as deploying the build on a network without using ARD, or really, just a simpler alternative that works?
    PLEASE HELP.
    Thanks.

    Hi,
    You can deploy package using any of these tools - ARD, SSH, Casper suite, Absolute manage, Land desk..and may be more but we have only tried these.
    We have mentioned ARD as an example, but other standard tools can be very well used for deploying package. and there is no need to have ARD installed on all machines where you want to deploy the package, but only on admin machine.
    can you please let me know - which client OS are you trying to deploy the package and whether the client machine is logged or logged in? please forward install.log if you are facing the error.
    thanks,
    Rahul | [email protected]

Maybe you are looking for