HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

Have you tried calling Apple tech support?
http://www.apple.com/contact/

Similar Messages

  • Has anyone else had problems with nForce ethernet drivers 3.13 and abo

    Hi, I installed the previous version of the nForce unified drivers (2.03) and I have had problems with the latest version of the unified drivers also (2.41). These both have ethernet drivers "3.13 (WHQL) + TOT .NVU"
    They seem to be the ethernet drivers fault. If I install one of the latest versions of the unified drivers, windows does not boot up, it just hangs at windows logo. ?(
    If I remove the ethernet cards drivers using safe Mode, the system will boot up fine. I also have to re-install older versions of the ethernet drivers to get the system to boot.
    I am using the K7N2 motherboard with onboard ethernet.
    Any reasons/fixes would be great , cheers  :]

    falty mouse got a new one worked fin

  • Has anyone else had problems with the macbook pro after the OS X Yosemite upgrade?

    has anyone else had problems with the macbook pro running slow after the OS X Yosemite upgrade?

    Same for me! my iphone 4s gets extremely hot whit IOS 7.0.2.

  • New iMac user.  My mouse doesn't seem to work properly on websites.  I just want to be able to click and have it do whatever I've clicked on automatically, for example "print" or "open link".  Has anyone else had problems with their mouse?

    Has anyone else had problems getting used to their mouse and how the clicks work or don't work on the internet?  I click and it doesn't automatically do what I click on.  So frustrating!

    Hi ndearborn0273!
    This is most likely just a settings issue with your mouse that you are able to change through the System Preferences. I have an article for you that can help you set this back to default, and that article can be found right here:
    Mac Basics: Set your preferences
    http://support.apple.com/kb/ht2490
    Specifically, you will want to pay close attention to this section of that article:
    Customize your mouse
    The Mouse preferences pane looks different depending on what kind of mouse you use. These settings let you set the sensitivity of the mouse to control how fast the pointer moves across your screen when you move your mouse, and adjust for your double-click reflexes. Other controls may be available, depending on the type of mouse you're using.
    Open System Preferences.
    Choose View > Mouse, or simply click Mouse.
    To control how fast the pointer (cursor) moves across your screen when you move the mouse, click Point & Click and use the Tracking slider to adjust speed.
    If Double-Click Speed appears, you can use the Double-Click slider to adjust speed.
    If your mouse has a scroll wheel, you can use the Scrolling slider to adjust speed.
    To change gesture settings, click the More Gestures tab. You can enable and disable gestures for swipe and Mission Control.
    Judging by your post, I believe your secondary click setting is set to use the left side of the mouse. The default set up for a former Windows user to be most comfortable would be having the secondary click set to the right side of the mouse, as is shown in the picture I have inserted above. Note that these settings will be explained by the little video on the right hand side of this window as you hover over the description of the action on the left hand side.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Has anyone else had problem with their speaker on a macbook pro when on the internet?

    has anyone else had a problem with their speaker while on the internet like youtube on a macbook pro?

    Please make a Genius Appointment and take it in for service. It's under warranty.

  • Has anyone else had problem with the STANDARD package?

    Hi Oracle gurus, has anyone here had the same problem with the STANDARD package? Or do I have to reinstall Oracle to make it work?
    Thanks.
    Ben

    missesboggs wrote:
    I literally just called AT&T and Apple about this today.  I was having issues with iMessage and texting my husband.  His texts back to me would show up as my name.  Turns out it's because we share the same AppleID.  So, I'm currently trying to change mine, but it hasn't worked so far.  I'm on hold with Apple right now to see if I can get it fixed.
    Both of you have registered the same email address for iMessage. If you were using a shared Apple ID and you updated your phones to iOS5, the default will be the Apple ID. Go into settings and change it.

  • TS1702 Has anyone else had problems with maintaining connection to "Overdrive"?

    Has anyone had problems with maintaining connection to "overdrive" ?

    I would recommend using the SEARCH function of the forums and locating the many others posts that have already discussed this issue.

  • Has anyone else had problems with there iTunes account? I have downloaded numerous ringtones

    i have downlloaded numerous ringtones from iTunes and then they disappear within hours.
    I Have sunk my phone into iTunes library on my desktop and it still allows them to vanish. I have the iPhone 6 and I have reported numerous problems and they re download but then disappear again. I went to Apple store and they see my phone is having a software issue but said to call apple for a refund, to rebuy my purchases. Is anyone else having problems ?

    I have also experienced this. I've downloaded the 'No Surprises' ringtone by Radiohead three times and every time I get charged for the ringtone by iTunes and every time it disappears after a while. This is really strange... I haven't talked to anyone at Apple about this, but I checked these forums out just now and, it seems, I'm not the only one with this problem.
    I'm using my brand new iPhone 6 Plus with iOS 8.1.1 and I'm thinking it's a software-related problem too...

  • Has anyone else had problems with ITunes and Windows 7?

    I have had problems with the update - 'server busy' and it locking up while synching my IPhone with my laptop (upgraded to Windows 7) - any suggestions? I have lost all my pictures

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Has anyone else had problems with a total wipe out of their 1.8ghz iMac G5?

    My three year old iMac G5 just suddenly refused to power up and my engineer said that the board had gone completely and that it was uneconomic to repair.
    He said he knew as soon as I told him the problem that it would be a 1.8ghz machine because he has had so many others go the same way.
    Is anyone else in this extremely uncomfortable and expensive boat?

    I am in the same boat as you are. My imac will be 3 years old in Nov. We did not purchase the extended warranty. Last week it started "failing to launch" documents, iphoto, quicken, etc. We made an appt. at the genius bar for tonight. By midweek, it would not even come on. It would make a loud humming sound (like a hairdryer and just spin on a gray screen. Nothing.
    Tonight I was told by a "genius" that we will need to purchase a new logic board for over 900 dollars. He went on to say that we may as well purchase a new computer. I am in shock. There have been little issues all along, but I never expected this. It just never seemed to run right since day 1. Now I wish we would have investigated.
    I'm not sure what to do. We are thinking about turning away from mac. This was our first one and we were talked into buying it by very satisfied mac user friends. I'm so dissappointed.
    Our g5 does not fit into the first generation category. I already checked that. Any advice for this sad mac owner? Do you think my HD is in tact? He said that can be transferred to a new computer, but I'm so nervous. HELP!

  • Has anyone else had problems with the Canon Pixma MG3250 on their air?

    I bought a Canon Pixma yesterday, and I have had problems setting the printer up as one I don't have a cd drive- so I had to download the software- and two my laptop does't seem to recognise the printer wirelessly. It is fine when I stick the USB cable in. I contacted apple to see if it was a software issue, they helped by getting a couple of things up- then I followed the guide from canon on how to install the printer and and connect to WPS but it just doesn't seem to like my mac. Help I'm at my wits end!

    I had a similar problem. After i extracted the audio track from a clip (so i can edit it down for a drop zone in iDVD) iMovie aborted and i couldn't get it to run correctly with that video again. Each time i tried to open it, iMovie would hang with the startup dialog saying there was less than a minute left to load the video.
    I trashed the video and pulled up my backup from my outboard drive (tedious; >.5hr over USB 2), i'm going to try again.
    I have QT Pro also (i upgraded for the file conversion features, mostly).
    PowerBook G4   Mac OS X (10.3.9)  

  • Has anyone else had problems with their RAW editing window?

    I'm having real problems with my RAW editing window (the one that automaticaly pops up when you open a raw file). I've opened several images, but when I click on the different thumbnails on the left hand side the large preview image in the center doesn't change. Obviously I need to be able to see this to make the required changes.
    Any ideas/help you be greatly appreciated!!!

    Hi Kate,
    I haven't yet been able to replicate your problem. Will you please describe your workflow? Are you simply selecting multiple files from your computer and double clicking to automatically open in Camera RAW?
    Also curious, with all of your images open in the RAW editing window, what happens when you use the arrows near the bottom right? Does your image change?
    Cheers,
    Michael

  • Has anyone else had problems with the recent iMovie update?

    I installed the latest iMovie, iWeb, iDVD, QT, and Security update this morning. I restarted and opened an iMovie project and it crashed three times within about 10 minutes. All I was doing was editing some audio clips on the timeline, I wasn't even rendering anything.
    Just wondered if anyone else has had any problems since the update?

    I had a similar problem. After i extracted the audio track from a clip (so i can edit it down for a drop zone in iDVD) iMovie aborted and i couldn't get it to run correctly with that video again. Each time i tried to open it, iMovie would hang with the startup dialog saying there was less than a minute left to load the video.
    I trashed the video and pulled up my backup from my outboard drive (tedious; >.5hr over USB 2), i'm going to try again.
    I have QT Pro also (i upgraded for the file conversion features, mostly).
    PowerBook G4   Mac OS X (10.3.9)  

  • Has anyone else had problems with the latest system updates to Mac OS X v10.6.8 with the java virus patch?

    After installing the latest updates to Snow Leopard the system hangs up and will not open properly.  This is the update to Java, etc after the virus was discovered.  I have done the updates on four different systems with the same result. 

    No problems with the Java update here, although I have Java disabled. Might try reapplying the Java standalone while in Safe Boot (Shift at startup chime), if you did it from Software Update.
    http://support.apple.com/kb/DL1516

  • Has anyone else had problems with long wakeup times on Cinema displays?

    We're having problems with long wakeup times on our Cinema Display. Noticed it after the Maverick update.
    Need help please. This thing is nothing more than a boat anchor to my developers... frustrating, expensive boat anchor.
    Thoughts?
    Thanks,
    Jeff Stutzman

    Hey Jeff,
    Thanks for the question. I understand you are experiencing issues with an external display and your MacBook Air. The following resource may provide a solution:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    While you should give all of the troubleshooting steps a whirl, definitely make sure to follow the steps in this section:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Thanks,
    Matt M.

Maybe you are looking for

  • OUTLOOK 2013 permission shared calendar Free/Busy doesn't work for some the users Exchange 2010 and Exchange 2003 that use outlook 2007/2010

    Hello, We are in coexitence organisation (transition Migration) Exchange 2003 sp2 and Exchange 2010 sp1. Users in Exchange 2003 use outlook 2007 and outlook 2010 Users in Exchange 2010 use outlook 2007, outlook 2010 and outlook 2013. Issue: users in

  • SAP PI/XI 7.0 License

    I am writing my diploma thesis about SAP Exchange Infrastructure and I want to know how much a customer has to pay normally for such a system. I heart he must pay a general licence price and additionally for transferring data with third party systems

  • Safari 5 cannot run on windows XP pro

    I am a bit confused about this problem. Reading some topics I saw that solution for my problem could be to delete or move "safari" folder from C:\Documents and Settings\user name\Application Data\Apple Computer. But this doesn't work for me. Also I t

  • User not receiving emails regarding approval notifications

    Hi, SRM system has been upgraded to 5.0. User is not receiving emails regarding Approval notifications. However, the user is able to view the SCs pending for his approval in his approval list. I checked the transmission of the emails, the approval no

  • Updating ARE 1 Document in tranaction code j1ia101

    HI, We are not able to update Certification Dates Arrived at Customs - Grayed Out Countersigned by Customs - Grayed Out Arrived Back - Grayed Out Sent to Excise Dept - Grayed Out Export Confirmed In transaction code J1IA101 as this transaction is don