HT1338 i can't update my verzion from 10.5.8

1) My computer is can't upgrade verzion and is stuck on 10.5.8
what to do?
2) I get over and over a worrning that my backup disk is allmost full-what it's mines?

1. 10.5.8 is the final version of Leopard, there are no further updates.
2. It means what it says. You need to clear some files off your hard drive.

Similar Messages

  • My  ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift   restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

    my  ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I can't update the iphone4, from an insertion iOS4.3.1 on an insertion iOS 4.3.3 - itunes gives out me an error 3259. What to me to do? How to me to update the iphone?

    I can't update the iphone4, from an insertion iOS4.3.1 on an insertion iOS 4.3.3 - itunes gives out me an error 3259. What to me to do? How to me to update the iphone?

    Temporarily disable your firewall and ALL of your antivirus/antispyware software and try again.

  • Can I update my iPhone from any PC w/o downloading and just logging in to iTunes account?  Can't find that option. thanks for the help!!

    Q:  Can I update my iPhone from any PC w/o downloading, just logging in to my iTunes acct?  Can't find that option.  Thanks!!

    You mean update your iPhone software? Yes, you can do that on any computer, but it REQUIRES an internet connection & yes the software needs to be downloaded unless already on the computer and the exact version for your model iPhone.

  • Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?

    Hi,
    I have installed Oracle 11g database.
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE 11.2.0.3.0 Production
    TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    I want to update the patch.
    Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?
    Is any impact on the database?
    Kindly suggest,
    Regards,
    Sachin

    11.2.0.4 is nothing but a patchset of 11.2.0.3, in-place upgrade is allowed :
    http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#UPGRD12370
    "You cannot install the new software into the same location for Oracle home as your current release, unless you are installing an Oracle Database 11g patchset release. For a patchset release, you can use the same Oracle Database 11g Oracle home."
    And since it's a patchset, a direct upgrade is ok.
    Lastly, yes, every upgrade has an impact (e.g. perf.), it has to be tested.
    Nicolas.

  • Can we update the data from SSRS report to any database ?

    Hi Team,
    Greetings !!!!
    Can we update the data from SSRS report to any database ?
    Thanks,
    Anand Gavle.

    Nope SSRS doesnt have write back options. Its just a reporting tool
    However one thing you can do is to link a webpage from SSRS report and do the changes through it
    SSRS has the ability to navigate to web page through which you can capture any data inputs from users and save it to your db.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Unique data record means you can't  update a record from ECC with same key.

    Unique data record means you can't  update a record from ECC with same key fileds right?
    Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
    I think we can only use unique record setting going from DSO to cube right?
    Please give me a simple scenario in which we can use this setting.
    I already search the threads and will assign points only to valuable information.
    Thanks in advance.
    York

    Hi Les,
    Unique Data Records:
    With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system – otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
    Hope it Helps
    Srini

  • Can't update daisy disk from Mac App Store

    Can't update daisy disk from Mac App Store!! What can i do? AppStore wrote You must login in to @@@@mail, but I login to my account!

    You must sign in to the App Store with the Apple ID you used to install the app. If you don't recognize the ID, see below.
    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard (command-C).
    In the Finder, press the key combination command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • HT4623 Can I update my iPad from iOS 5.1 to 6?

    Can I update my iPad from iOS 5.1 to 6?  It says there are no updates available when I check but there are apps I want that require the newer iOS.

    If yours is an iPad 1 then it can only update as far as iOS 5.1.1

  • Can I update to yosemite from 10.6.8

    Can I update to yosemite from 10.6.8, or do I need to order Lion or Mountain Lion first?
    I thought I could just upgrade but when I select UPGRADE, I get messages like: "Safari can't open the specified address"

    Well yes, however you do not give enough information. Technically all you need is 10.6.8, but there is more to the equation.
    Easy to figure out if you look at this ref of requirements
    https://www.apple.com/osx/how-to-upgrade/

  • HT4972 can i update my iPhone4 from 4.3.1 to the latest ios 6.0 or do i need to update my phone to ios5.0?

    can i update my iPhone4 from 4.3.1 to the latest ios6.0 or do i need to update my phone to ios5.0 first?

    When you update, iOS 6.0.1 will be installed. Follow the directions here:
    http://support.apple.com/kb/HT4972

  • Help! Can't update my ipad2 from iOS 5.1.1 to iOS 7

    IM using iPad 2
    ITs always error when I was updating my iOS 5.1.1 to iOS 7.2.1
    ITs was been lfew months ago I can't update the iOS.
    SOme time can be downloaded but not allowed to install, or can't be download, error.
    PLs help me!!:(

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • HT1338 i can not update software 10.8.2 to 10.8.3 , when i click on update box to start updating i just get a long waiting and at the end says :the error occured . what is the problem?

    i can not update the software 10.8.2 to 10.8.3 , something block the process and it dosen,t work , how can you help me?

    Sometimes, the OS X 10.8.3 App Store version gives problems. In your case, download and install 10.8.3 from the Support website > http://support.apple.com/kb/DL1640 It should update Mac OS X without any problem

  • HT1338 I can't update my Mac past OS X verison 10.6.8.

    My borther on his Mac is running OS X 10.8.4 however I'm running 10.6.8 and I need to update past verison 10.7.0 but when I click for updates I get Software Update doesn’t have any new software for your computer at this time.
    What do I need to do to get the update.?????

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • HT1338 how can i update to latest display driver

    how can i update to latest display driver i hv mini mac with i5 8gb

    by purchasing it from the app store.

Maybe you are looking for