HT1338 i had no trouble using my casio keyboard for logic 9 to trigger sounds. now i installed logic x and i get nothing. HELP!!!
i cant get no sounds out from my casio keyboard. showing no input from my casio into logic x. help!!!
Here is a link which describes the process for changing an Adobe ID:
Adobe ID, sign-in, and account help
Similar Messages
-
Our family uses one Apple ID for all of our iPhone 5's. We installed the update and now we are all receiving each other's pictures and texts. How do we stop this?
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l -
THANKS.
Depending on which version of Firefox you're using, it no longer currently supports the plug-in provided with Adobe Reader. You have to use PDF Plugin 2.4.4. Just disable the Adobe plugin and use the Schubert plugin.
Clinton -
I like to know anyone having problems with bluetooth functions with new IOS 7 ?
I have the same problem with my iPhone4 connected to my VW car via bluetooth. In the previous version of iOS I could start and stop and change tracks in for example Spoitify with my steering wheel buttons but now with iOS 7 it doesn't work anymore.... Apple please correct this ASAP...
-
I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?
You should never lose contacts under any circumstances.
Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer where such important data should be available with or without an iPhone or any cell phone. Not a good idea to depend on a cell phone for such important data which can be lost or stolen or damaged beyond repair.
In addition, there are a number of free email accounts that support syncing contacts over the air including an iCloud account, Gmail, Yahoo, and Hotmail.
If you are not syncing contacts over the air with an iCloud account and not backing up your iPhone wirelessly with your iCloud account, your iPhone's backup is being updated by iTunes on your computer which is updated as the first step during the iTunes sync process.
With Windoze, contacts can be synced with Outlook 2003, 2007, or 2010 along with syncing calendar events, notes, and reminders, or with the address book app used by Outlook Express and by Windows Mail called Windows Contacts for syncing contacts only. With a Mac, contacts can be synced with the Address Book app. This is selected under the Info tab for your iPhone sync preferences with iTunes.
If the supported address book app on your computer is not used and has no contacts available, before the first sync for this data enter one contact in the supported address book app on your computer. This will provide a merge prompt with the first sync for this data, which you want to select. -
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
I had a girlfriend buy me an ipod for my mom's music at her Celebration of Life and someone took it. Is there a way to track it down? She did register it. I can't believe someone did this to me on one of the worst days of my life.
Unfortunately, unless you set up an iCloud account on the iPod and turned on Find My iPod before it was stolen, no. Even if you did do that, there are many ways it could fail (for example, the thief could wipe it clean or not try to connect to a network or the network's location might not be known). But, you could try it by logging in to iCloud and using the Find My iPhone applet.
-
When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get the Mac OS X can't repair the disk error message. Then the spinning colored pinwheel pops up and I can't use iTunes. Please HELP!!!!!!
Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.
-
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive. -
I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??
Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.
-
I want to use my old iphone for my kids as an ipod. How do I keep from getting text messages on it when it is turned on? If it is on, and my droid razar is on, text messages will go to the iphone. It is either a 4 or 4s ...I don't have Siri, so I think it's a 4. Thanks
Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
It would depend however on the age of the child.
Good Luck -
If my iPhone was stolen and i want to reactive an old phone using that same number for the time being while i waited to see if I could get my iPhone back, would the iPhone still work while i was using a re-activated old phone of mine?
If a new SIM is activated on the same account for the same number, any existing SIMs for that number are deactivated.
Why exactly would you care if the SIM in the missing device still works or not? -
I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB. I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message
I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB. I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message
-
I created a pdf form and then imported it to Forms Central for distribute. It is now loaded to my website and setup so a person clicks on the link to open the form. At this point they then have to go to upper right to open form using a different view. I would like the form to open directly in Adobe Reader form to make it easier to enter information. Thanks, Ike
If you created it in Forms Central, you have to edit it there. I believe Forms Central is similar to LiveCycle Designer in that the form created is no longer able to be edited in Acrobat. I might be wrong, but that is my understanding. You add the submit button in Forms Central. Within Acrobat, you should be able to go to the forms menu and Manage Data to save the data to an Excel file. Others better with forms should be by to clarify things, but this should get you started. In the future you might find it better to post a forms question in the forms discussions.
-
I am trying to install Office:Mac 2011 on my Air using a remote disc. I have gotten all the way to where I am installing it on my air, but it is telling me to select a disk to install office on and there is nothing to select. The box is empty.
It might be easier to download the trial version from the microsoft site and then use the code off your box set to activate it.
Maybe you are looking for
-
Suggestion for a new tag: htmlId
So far I know the there is no standarized way how the rendered HTML ids are genereated from the JSF ids. Now there are a lot of usefull JavaScript programs which need the (HTML-)id of an input field. What do you think of a tag (let's say <h:htmlId>)
-
Can't delete photos in smart album view
Assuming we all know how smart albums work, let's jump to why I can't delete a photo from a smart album. In all other views, it seems, I can delete images. When I'm scanning through 500 pictures tagged with Christmas in my Christmas Smart Album and c
-
Clearing customer downpayments with invoice and aging
Hi Gurus, What is the correct process of clearing downpayment with customer invoice so that system will show correct aging for the remaining amount of invoice? Should we use partial or residue... Thanks
-
I constantly have the following in a bar at the top of the CNN page: "Firefox prevented this page from automatically reloading". Ii is accompanied by an "Allow" button. How do I get rid of that. I also have on every site randomly highlighted words in
-
IP address missing, cable company says its my iMac
We've have Road Runner high-speed access for more than a year, no problems. Last week, we started getting "You are not connected to the Internet," or REALLY slow/incomplete downloads, but it was hit or miss. Called the cable company, they had me rese