HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX processor.

I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help thank you Allan R

So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 - Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

Similar Messages

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

Thanks, PAHU, for providing the Australian site for the Canon driver. I have an MP500 and it still seemed to print fine after I downloaded Yosemite. However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1. Just tried printing this evening and it wouldn't. Advised I needed undefined "software." Got various error messages. Went to Google and read this and downloaded that to no avail. Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter." Had no clue what that meant! System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions). Finally I downloaded from the Australian site, just the print driver 10.51.2. The printer then printed!!! (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.) I'm holding my breath that things will continue to work.
Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

Mobil email requires a new password but I didnt have to change from the old password

mobil email requires a new password but I didnt have to change from the old password
I just paid $7 and it will not take my old password
I went to live.com and Microsoft didn't make me change passwords.
So give me $7 credit or the phone number of Mobil Email as there is no way to contact them
thanks
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

1 hour with customer service just now wasted 1 hour for a cancer cure as this is a 1984 Era why do this to me.... now I have no mobil email as after a hour he your employee gave up...
wow
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
Have new Canon Pixma Pro-100 printer and set it up yesterday. First thing printed was a
document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK. Next I fire up
Photoshop and open a 4 X 6 inch image to do a test print. I set it up in the print dialog as
4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
manages the color. I load the paper in the rear tray close the covers and hit print. Now, when
it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
on the remaining 2.2 inches then spits the paper out. It does this in Photoshop (any image it doesn't
matter), and it does it printing from Capture NX. I have been able to get it to print on the paper
correctly using Apple's Preview program but that that's not going to do me any good. I was on
the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
I want to be able to print from Photoshop. Any one every heard of this or experienced the same
problem? Thanks JamesD!

Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
I also checked out this B&W test image:
http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
You can print a series of test images:
find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
You can do a similar thing in Lightroom using the printer driver and User Templates.
There would be some one-time trial and error to that approach.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Canon Pixma MP280 AIO printer - ink levels cannot be displayed - how to resolve this problem?

Good morning everyone,
I have a Canon Pixma MP280 AIO printer (about 18 months old) now which I previously had installed on a old Windows 7 Pro x64, SP1 Dell Optiplex 755 computer. That computer finally bit the dust.
My present computer is a Dell Optiplex 745, Win 7 SP1 x64 Home Premium machine.
Description of problem: After installing the printer on this computer (using the CD/DVD that originally came with it and following all the instructions), I find the printer will no longer display the ink levels. Every time I click on "Printer Status", the pop-up box just states the info cannot be displayed. (All other functions of the printer work just fine).
Resolutions attempted thus far w/out success:
1. Uninstalled printer and deleted all files associated with it (2 times). Re-started computer, then re-installed it.
2. Emailed Canon Support. their response did not resolve the issue. (Don't recall just what they said as I've long since deleted that email reply).
3. Searched the Forums here for an identical problem with the same model printer, but didn't see anything.
My question: Is there a resolution for this problem?
Thank you for your time and any help.
Pete C.

Yes, thanks for your follow-up .. .Mine did not work after the day-long shut off.
I am gonna risk buying a new black ink cartridge since my machine seems to just be running the error on the black alone.
Good luck with your new one.
I will probably upgrade too, if this does not work. I cannot complain about this machine. I had two, one for office and one for home. Both took A LOT of use. And, i used no-name refill cartridges and no-name refill ink for over half the time on the home machine.
This one, the home one lasted about 6 years, the other about 4+1/2 . I think that is pretty **bleep** (lol it censored the correct spelling of 'dam') good mileage for a fairly inexpensive machine, that got very high ratings, and gave me all those features.
Good Luck.

I'm retiring my old computer (windows xp) to a new computer (windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that way in my new computer

i'm retiring my old computer (with windows xp) and bought a new computer (with windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that way in my new computer. I also have my ipods, iphone sync'd in the old computer so i want to make sure that things won't get messed up (my apps, playlists, etc) when i move over everything to the new computer and sync all my devices with the new computer.
Thanks in advance for the tips.

Make sure the XP box is upgraded to the latest version of itunes. Also make sure it's using the itunes media folder layout as explained here, because that's what the W7 is going to be using.
http://support.apple.com/kb/HT3847
Install itunes on the new W7 PC.
Get these folders from the XP machine
C:\Documents and Settings\username\My Documents\My Music\iTunes
C:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
And put them here on the W7 machine
C:\users\username\My Music\iTunes
C:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Problems with Canon Pixma iP4300

I just purchased a new Canon Pixma iP4300 printer and can't find it in Printer Setup Utility to add as a new printer.
When I connect it directly to my MacBook Pro (Core Duo) it is invisible. I have downloaded the latest drivers available from Canon. Given the point below I am fairly certain it is not a problem with my USB cable either because the printer is recognised when I plug my USB printer cable into the Airport Express.
Confusingly, I can connect to it through my Airport Express base-station using Bonjour. A problem with this connection is that it does not allow me to use the utilities - so, for example, I can't align the print heads - or use any of the other software that came with the printer because it doesn't recognise the printer over the wireless network.
Does anyone have any suggestions?

And as soon as I posted this I found a spare USB cable and tried that... and it worked.
I guess the USB cable connects properly with the Airport Express and not with my MacBook Pro. Curious. Very curious.

Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work? thank, Ric

Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, Ric

Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

I have a Canon PIXMA MX870. Turning it on I get a code: B200. Tried shutting down & restarting, same

I have a Canon PIXMA MX870. Turning it on I get a code: B200. Tried shutting down & restarting, same error msg.

We have the same problem. I think it has something to do with the printhead. We found reference to this problem and suggested fixes under the model MX850 on this forum. One person suggested soaking the printhead. Yikes. We barely got much use out of our printer before this happened. Very frustrating. Husband tempated to buy an Epson today.
Here is the solution offered on another message in this forum:
puskas
New Contributor
Posts: 2
Registered: ‎07-16-2013
Re: Error Code B200
Options
‎07-16-2013 01:43 PM
Same for me. I looked elsewhere and found other solutions. I soaked the print head in warm water until it ran clear. Dried the unit for 15 hours, unplugged everything. Reinserted the printhead, ink cartridges, power cord, USB connection. Started unit and it worked. How long, I have no idea, but it saved me some money

HI, I have a Canon Pixma MG5250 printer and it doesn't seem to recognize iPhoto. All my photos are in iPhoto but I can't access them when the printer's 'photo print' box comes up. Any suggestions? thanks

Hi,
I have a Mac OS X version 10.5.8
I now have a Canon Pixma Printer MG 5250 and it doesn't seem to recognize iPhoto, where all my folders of photos are in the computer.
All other aspects of the printer such as scanning and printing documents are working. When I open the printer's
'photo print' box on my Mac, it cannot access iPhoto.
I would really appreciate any feedback and suggestions as to what to do.
thanks.

If you want to print a photo that's in your library you should do so from iPhoto. Select the photo, crop to the size you want to print and type Command+P to start the print process. In the Print window select the paper size and print size, printer and then click on the Print button.
OT

I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card,

I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card, I get the following error:
"You need permission to perform this action" and below that:
"You require permission from the computer's administrator to make changes to this file".
Printer is set up wireless.
I am signed on as administrator, can't get access with any user account.
The old problem ridden HP Photosmart I replaced, I could change, delete, etc. without issues.
Solved!
Go to Solution.

hi ehnco,
It sounds like the Read/Write attribute on the printer needs to be changed. Use the following steps to change the read/write attribute:
Make sure that the machine is turned on
Press the <Setup> button.
Use the   button to select  [ Device settings], then press the <OK> button.
The Device settings screen is displayed.
Use the  button to select [Device user settings], then press the <OK> button.
Use the  button to select [Read / write attribute], then press the <OK> button.
Use the  button to select [Writable from LAN PC], then press the <OK> button.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have a Canon Pixma i4700 printer and since buying my iMac I'm finding it difficult to print photographs without a severe warm (red) tone.

I have a Canon Pixma i4700 printer and since buying my iMac I'm finding it difficult to print photographs without a severe warm (red) tone.
What am I doing wrong?

I can't give you detailed instructions, but there should be a way to print a built-in test page. If the color is off on that, the printer has an internal problem such as a clogged head.

I have an ipad 2, verizon jet Pak router, canon pixma mg3220 wireless printer. All were working until yesterday. Now I get no air printer found message. Have shut down everything and restarted. No change

I have an ipad 2, verizon jet Pak router ang canon pixma mg3220 wireless printer. All were working until yesterday. Now, I am getting no air printer message. Have shut everything down and restarted. It did not work.

See requirements for AirPrint (http://support.apple.com/kb/ht4356):
If your printer supports AirPrint but does not work then:
Your printer might need a firmware update
Your printer must be on the same WiFi network
Your router must support Bonjour (Zero-configuration networking).
For troubleshooting:
Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPad
Try to print.

My new HP Pavilion desktop has no usb connection option for my old Canon Pixma iP 2600 printer

Greetings:
I can no longer locate the installation disk for my my old Canon Pixma iP 2600 printer. I'm able to install it w/the add a printer feature in the control panel, but the desktop fails to read that the printer is connected via usb cord. I'm not finding any option to install it as a usb printer. Please help asap. I can't afford to replace the printer, and I have several documents I have to print today or early tomorrow, or there will be dire financial complications for me. I NEVER had this problem w/Dell. (the operating system is windows seven, which is exactly what i was running on my older dell model - i have searched this forum and located a similar question, but that querent was able to find a usb option in the drop down menu for port installation. that option is absent in my attempts).
Thank you!
This question was solved.
View Solution.

Firelily, welcome to the forum.
Here is the download page for the driver and the software for the printer. If you install it, you should be able to print.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX processor.

Similar Messages

Maybe you are looking for