HT1338 I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007. What is the latest OS that i can upgrade to? And is that OS compatible with Logic 10?

I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007. What is the latest OS that i can upgrade to? And is that OS compatible with Logic 10?

Logic Pro 10 requires OSX 10.8.4, which is not officially supported on your Mac Pro (must be Early 2008).
There are, however, unofficial workarounds to install 10.8 on those older models that you can search for on Google.

Similar Messages

Running 10.6.8 on Mac Pro Dual-Core Intel Xeon 2.66GHz processors. Can I upgrade to Lion 10.7

I've just upgraded from 10.5 to 10.6.8 on a Mac Pro Dual-Core Intell Xeon, 2.66GHz. Is it possilbe to upgrade to Lion 10.7 with my Mac Pro Dual Core or have I just hit my ceiling on 10.6.8 update ?

Mac Pros are not PowerMacs. In 2006, Apple changed all its cheesegrater enclosure Macs to have the Xeon chip installed, and changed the name to Mac Pro at that that time from PowerMac G5. That said, all Mac Pros can upgrade to a minimum of 10.7.5. Only the earliest ones can't upgrade to 10.8 and above. 10.7 and later do not have Rosetta, the ability to run PowerPC (pre-2006) applications natively. For other pitfalls, read this tip.

The AVI Radeon X1900 XT video card in my Mac Pro Dual-Core went bad and I need to replace it. I found one that is $250 but I don't think that I need the gaming-type processor. I am using a 23" Apple Display. Are there lower cost options? -C

The Radeon X1900 XT video card went bad in my Mac Pro Dual-Core Intel Xeon. (I tried it with a good one at the office). I found one online that was $250. I don't need the gaming capacity of this card and was wondering if there were less expensive video cards that I could use in this machine. I run Adobe Creative Suites for graphics design and have a 23" Apply display. Thank you for any help that you can provide. -PretzelMcK

Then pick up the ATI 5770 AND upgrade to 10.6.8.
Same price for a good card that will work and helps to have 1GB VRAM.
There aren't any other real choices let alone less expensive.
Even the ebay links I had and not a lot of choices.

Aja Kona Card (Migrating from G5 to Mac Pro Dual-Core)

I own a small video production company.
I am migrating from an old G5 to a Mac Pro Dual Core given to me. The Aja Kona card doesn't fit into the Mac Pro Dual-Core, as the card slots are different.
Any way to adapt the G5 compatible card to the Mac Pro slots? I would only use for importing older analog media, as the newer HD stuff we shoot is brought in electronically.
Thanks for any help you can offer.
DW

Thanks, Grant.
I gave the G5 to my kids, so I'll probably just keep the Kona card/bundle in there until needed, hook up the appropriate VCR/VTR, and then dump the captured footage onto a HD to bring onto the Mac Pro. Too bad there isn't some internal/external adapter solution...

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account.

HT1338 I have a Mac pro i believe 2008 and my software is 10.5 i think.. should i upgarde tp 10.6 first and then to OS X Lion?

I have a Mac Pro, i believe from 2008 and my software is 10.5 i think.. should i upgarde to 10.6 first and then to OS X Lion?

You'll need to call the online Apple store, which in the US is at 800-MY-APPLE to buy OS X 10.6 Snow Leopard. Install OS X 10.6, do Software Updates and you'll be at OS X 10.6.8.
Then call the online Apple store again (or when you call them to order 10.6) and purchase a code to download OS X Lion (you can't see it in the App store anymore). In a couple of days, you'll get an email with the code that you can then use to download it from the App store. You need to be at OS X 10.6.6 or better to access the App store.
You'll need 2GB memory minimum for Lion and 4GB is recommended.

HT1338 I have a Mac Pro (Late 2006). Will I be able to upgrade to Mountain Lion?

I have a Mac Pro (Late 2006). Will I be able to upgrade to Mountain Lion?

No.
From
http://www.apple.com/osx/how-to-upgrade/
Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)

Mac Pro Dual Core (pre 2009) - Leopard to Snow Leopard and Final Cut Pro 7

I have a pre 2009 Mac Pro running Leopard and Final Cut Pro 6. My question is should I upgrade to Snow Leopard, and Final Cut Pro 7? Both, neither, just one of them... and in what order?
I am afraid of some of the issues people have been discussing (one website even said with a non intel based system neither updates can be done, but I have Intel Xeon processor)
Any help is highly appreciated. Thanks kindly

Your macpro will run Snow Leopard and FCut 7 just fine. There are plenty of "whats new in Final Cut Pro" tutorials out there to research and learn whether the new things are useful to you. Snow Leopard...plenty have had issues with it. As always, it's best to have a full mirror backup before you update to Snow Leopard so if you do have problems you can go back easily. I'd definitely move to 10.5.8 if not SLeopard. I have a PCIe card that won't work with SL so I'm holding off till I install a new card. There are still some incompatibilties known so you may want to check Apple's list.

I get the blue screen loop when I try to start my Mac Pro dual-core intel computer. How can I get it to open?

I get the blue screen loop when I try to start my Mac-Pro. How can I get it to boot up all the way? Can anyone advise me?

Which OS X is installed?
Troubleshooting advice can depend on that information.

I have a Mac Pro 8 Core and Snow Leopard won't install from the DVD.

Any idea why?

Either your machine doesn't meet the [Snow Leopard system requirements|http://www.apple.com/macosx/specs.html] - which I can't imagine would be the case for that machine, though I don't know that for sure - or you're using the wrong disk. Note that the gray disks that shipped with one machine will not work on a different one, unless they are exactly identical models. Or, I suppose, you've got a bad disk or hardware problem.

UPGRADING AND MIXING MEMORY ON MY MAC PRO QUAD CORE DUAL 2.8 (Xeon)?

Hello,
I have a Mac Pro Quad Core Dual 2.8GHz (Xeons) with 4GB of memory (2 x 1GB Apple modules + 2 x 1GB other brand - Shown as "Manufacturer 0x855D") and now I want to fill the other 4 memory slots by adding an additional 16GB (4 x 4GB modules) for a total of 20GB of RAM.
My 2 questions are:
1.- In which order/pattern should I install these new 4 X 4GB modules along with my original Apple 2 x 1GB modules and the "Manufacturer 0x855D" 2 x 1GB modules the best way (for better performance)? - I have heard stories that if I do it improperly, I could slow down my Mac Pro...
This is how I have them configured right now:
Raiser A / DIMM 1 = 1GB (Manufaturer "0x830B") - I assume this is the Apple memory, right?
Raiser A / DIMM 2 = 1GB (Manufaturer "0x830B")
Raiser A / DIMM 3 = Empty
Raiser A / DIMM 4 = Empty
Raiser B / DIMM 1 = 1GB (Manufacturer "0x855D") - How can I find which manufacturer is this?
Raiser B / DIMM 2 = 1GB (Manufacturer "0x855D")
Raiser B / DIMM 3 = Empty
Raiser B / DIMM 4 = Empty
2.- What brand would be most compatible to work with my Apple 2GB (2 x 1GB) factory memory? Kingston? Crucial? Mushkin? iRam? Corsair? OWC? (Does OWC sell their own brand? or which one do they carry?-its not specified on their web)
Thank you so much in advance for all your help!

About RAM installation in the Mac Pro
Mac Pro memory arrangement photos
Mac Pro Memory Configuration
Memory Tests- "2008" Mac Pro
Ram should be installed minimally in matched pairs and optimally in matched quads. This means the memory modules are the same size and specifications. They should also be equipped with the Apple-certified style of heat sink.
Brand really doesn't mean much as long as they work.

Error message on my Mac Pro Quad Core Dual

Hello..I'm hoping someone out there can help or advise me.
I turned on my mac this morning to find it's normal loading screen of grey with the darker grey logo in centre..all normal at this stage. This was followed by a wipe from top to bottom making the background grey a little darker and in the centre the apple logo was replaced by what appeared to be a semi transparent power button symbol with the words. "You need to restart your computer. Hold down the Power button for several seconds or press the restart button"
I have tried this several times to no avail I have also zapped the P RAM again nothing. Can anyone out there help. I have a Mac Pro Quad Core Dual which is only a few months old and is up to date with its system software.
I could be so grateful of any assistance.
Warm regards
Sophia

Make an appointment. But in the meantime...
So from cold boot, you can't do the Command Option P R through 2-3 full reboot cycles (don't let up)?
Unplug everything and let it sit overnight without power cord or anything. That is the only way to rest the SMC system management controller on the 2008 model, the older model still had a reset button.
Also learned that the 2008 Macs can all boot AHT if the original OEM installer was used to install the system and the drive has not be completely reformatted and retail OS X used, just holding down "D" on startup. But you have to
Also, pull all your hard drives. Rule out that, which I have seen a hard drive cause panic on startup, which required disabling journaling and other repairs from Disk Utility and deleting caches, then repair, and finally do Safe Boot (shift key down on startup).
The only way to test RAM is with TechTool Deluxe or Pro; with Memtest or Rember; and to test some devices is to try using a differnent one, keyboard and mouse included if you have any.
Last hope: open case, look inside, take the two RAM Riser cards and pull out, check the DIMMs are fully seated.
If you have 3rd party memory, remove that (would need to before taking in probably).
Might want to put RAM back to way it shipped with 2 x 1GB and one DIMM on each Riser in slot one. Maybe that will wake this sleeping giant. Changing RAM config use to be one way to clear nvram in the distant past in the time of Arthur.
PS: it is "odd" to find a BTO 3.2GHz system, and only 2GB. For memory performance, Barefeats found a marked improvement with 8 DIMMs, and of course Mac Pro really needs memory to feed 8 cores and pro apps (2GB would be okay for web and email type use only).

Opinions, Mac pro 12 core or 6 core for video editing?

Hello everyone,
I know that this a most likely a rhetorical question but i currently have a mac pro 12 core 2.4ghz 12 gigs of ram (plan on upgrading to 32 gigs) and a 6 core 3.33ghz 12 gigs of ram. I do a lot of video editing (starting to use Final cut pro X) and i do a lot of visual effects work in Adobe after effects and 3D animaton work in cinema 4d. I am only keeping one of the computers.. what are your guys thoughts? Should i keep the 12 core even tough it has a lower clock speed, or should i keep the 6 core since it has a higher clock speed? I dont mean to ask such a dumb question but i want to hear what your guys thoughts are.
Thanks in advance!

After Effects: http://www.barefeats.com/aecs6.html
If you rely on cpu alone, it may look like it is working, or lagging, or wating, but with the combined power of GPGPU can make all the difference.
Communicating over Quick-Path is okay but Intel knows that they need to up the GT and L3 cache to improve it more. ie, there are times when two 6-core Mac Pros are faster than one 12-core, given the same GHz.
the real reason people bought dual with lower clock was hoping it would do more work, but when you have 3.33GHz a lot of work that cann't be dispatched and is not multi-thread or multicore all benefit.
W3680s are relatively cheap @ $600, you will not find X5600 sets unless you can make your system pay for whatever you throw at it and do so in a year to write it off and pay for doing more projects and more income.
This guy goes kind of crazy with custom setup 12-core 3.33s, 960GB SSD PCIe and 96GB RAM.
More RAM helps some areas but not rendering. So find the bottlenecks or throw everything at the problem and hope.
$1660 a piece X5680 - $1470 on Amazon
http://ark.intel.com/products/47916/Intel-Xeon-Processor-X5680-(12M-Cache-3_33-G Hz-6_40-GTs-Intel-QPI)
http://www.amazon.com/Intel-X5680-Processor-Socket-LGA1366/dp/B003ELYSJQ/
Only if you shop ebay for used parts, and by then whatever Intel and Apple agree on next go round new is a better system solution most of the time than to throw $3000 into an older system. $3k would be another 6-core 3.33 if that helps.

Powermac G5 Dual Core 2.0 GHZ or Macbook Pro Dual Core 2.0 GHZ

I have a Macbook Pro Dual Core 2.0 GHZ that currently has 1 GB of RAM in it. For the most part it runs fine, but I do come into problems with it sometimes while I'm doing video editing which is my main usage for my computer. I currently run Final Cut Studio 2. Would it be worth it to sell this computer and get a Powermac G5 Dual Core 2.0 GHZ or 2.3 GHZ and upgrade the RAM to 8 GB to help my video editing run smoother? The reason why I am considering this is because I would like a computer that would work better with my video editing at a cost that I can afford. I also would like to have a firewire 800 port for my external hard drives. I rarely use my internal hard drive, so that is no factor in my decision. Currently I cannot afford a new Mac Pro, but will be buying one in about a year. I'm just trying to decide if this would be a good switch for right now. Thanks for your help.
Message was edited by: hb8788
Message was edited by: hb8788

Although I don't own a Mac Pro, rumor has it that they run video chores significantly more efficiently than do the last generation G5's. I bought my 2.3 GHz, w/the 7800 card, for $600, last November on eBay. The case wasn't cosmetically perfect (a rather nasty looking crimp on the front handle) but it has performed well running my video (EyeTV and recording) and academic (I teach math & Mathematica) needs. I picked-up extra memory (it now has 6 Gigs) pretty cheap (around $75, IIRC), from Kingston. I also took the advice of many here and got a WD 640GB HD that made a significant difference in both boot-time and opening applications. However, if you're going to get a new Mac Pro in a year, it's almost like throwing money away - the G5 will probably have its' depreciation rate decrease once the software vendors no longer continue supporting pre-Intel machines. That being said, my G5 is more than sufficient handling my present version of Mathematica - I don't think that paying $3000, or whatever it takes to get a new Mac Pro, would balance the marginal increase of utility I would get using Mathematica. If I were a video guru, I might feel differently. I thought I could give you a definitive yes, buy the G5, because I really love mine. Unless something happens, I plan on having it for at least a few years. At about $250/year, if one figures that I'll have owned it for a total of 3 years, that's less than 70¢/day. But I also value the opinions of many of the posters who have commented on the new machine's speed, compared to the 2.5 GHz Quad, say.

Mac Pro Quad core Intel Xeon upgrade advice please!

Hi all, i have a Mac Pro Quad core 2 x 2.8ghz Intel Xeon (2008 model) with 4gb RAM.
I am planning on giving it some upgrades and a fresh OS install as it is slowly grinding to a halt (particualrly noisey hard drives)
Can anyone recommend best/fastest/silent! S-ATA hard drive to upgrade to?
Can anyone recommend a good replacement ATAPI DL DVD-RW Drive as mine is also on its way out.
Ram upgrade. Lots of space for RAM so what would you all recommend?
Ultimately i am finding myself working with alot of large PS file and so would welcome any suggestions to improve/soup-up the processor/performance.
Thanks for any advice in advance...

24GB RAM gets cost ly when you look at 800MHz FBDIMMs in 2x4GB
You shoudl have added more as 4GB is vary basic and miinimal
Any SATA drive device is fine. WD Black 1-2-4TB / WD 10K VRs are fast but not as quiet though I do hear those WD Blacks.
A single SSD for a system is nice.
10.6.8 works best in that system.
Your GPU most probably is in need of an upgrade.
You should never need to do a reinstall of the OS. Clone. Yes. And start wit h a new OS by not upgrade in place over the old OS but that is when to clean install, clone and use Set up Assis tant.

HT1338 I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007. What is the latest OS that i can upgrade to? And is that OS compatible with Logic 10?

Similar Messages

Maybe you are looking for