HT1338 My mac book pro has three updates ready to install.  When I select all three of them and click install it shows them downloading, the computer restarts, and when the computer turns back on and I go to updates again they are still there to install. 

My mac book pro has three updates ready to install.  When I select all three of them and click install it shows them downloading, the computer restarts, and when the computer turns back on and I go to updates again they are still there to install.  Help

Best to install them one at a time, re-booting between each one.

Similar Messages

  • HT1338 My Mac Book Pro has a blank screen and will not respond to anything.  How do I turn it off or back on.  No key respondes

    Mac Book Pro will not respond.  Only has blank screen.  How do I get it to respond?

    Any resolution to this ?????

  • HT1338 my mac book pro has started getting this panic kernel shut down stuff went to apple store they told me it was my ram changed ram still doing the same thing apple is like we could care less told me to buy a new computer anyone else getting this?

    my mac book pro is getting this panic kernel shut down went to the apple store they told me the ram was bad replaced ram it is still doing it contacted apple they told me buy a new computer anyone out there with this problem and can it be fixed?

    If they replaced RAM to fix a problem and it is not fixed take it right back to them.

  • My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus).  How do I make sure it's running at peak efficiency before I complain to comcast

    My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus).  How do I make sure it's running at peak efficiency before I complain to comcast

    Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
    Restart the router and the broadband device, if they're separate. Any change?
    Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
    If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
    Are any other devices on the network, and if so, are they the same?
    If you can connect to more than one network, are they all the same?
    Are all network applications affected, or only some? If only some, which ones?
    Is networking always the same, or is the problem intermittent?
    Disconnect all other devices from the network. Any change?
    If you're running a MacBook with the lid closed, open the lid. Any difference?
    Start up in safe mode and test. Any difference?
    Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
    If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

  • Mac book pro has become very slow. How to analyze this and resolve this?

    My mac book pro has become very slow. How to analyze and resolve this?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Mac book pro has grey screen with apple in the middle

    my mac book pro has a grey screen, apple in the middle and a spinning wheel.  i have tried the command r. nothing is working

    Mac OS X- Gray screen appears during startup
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My mac book pro has got 41 GB of other stuff on it clogging it up how do I find out what is rubbish and delete it

    my mac book pro has got 41 GB of other stuff on it clogging it up how do I find out what is rubbish and delete it. To free up some memory. I can't believe I have filled it up intentionally.

    For information about the Other category in the Storage display, see this support article.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Then reboot. That will temporarily free up some space. Do the same in other applications, such as Aperture, that have an internal Trash feature.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • My MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before

    MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before?  I've only had this for about 3mos.  I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.

    Hi S,
    Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964?

  • My 2 year old mac book pro has started to run very hot and sounds as though it is working very hard and seems slower....any thoughts?

    my 3 year old mac book pro has started to run much slower, very hot and sounds as though it is running hard....any thoughts?

    Login to another User account. Is it faster there?   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My mac book pro has duplicate photos in my photo library how do I remove the duplicate photos?

    My mac book pro has duplicate photos in my photo library - how do I remove the duplicate photos?

    Duplicate Annihilator
    iPhoto AppleScript to Remove Duplicates
    via Old Toad reply in this thread: https://discussions.apple.com/thread/3122008

  • Just want the information to be out there - my My Mac Book Pro has been stolen! Serial no W8*******ATN, model no A1278. Is there anything I could do to traci it or at least block it ??

    Just want the information to be out there - my Mac Book Pro has been stolen! Serial no W8****ATN, model A1278 what could I do to track it or at least block it?
    <Personal Information Edited by Host>

    You can use iCloud to lock it if you had that set up. Otherwise, the only thing to do is report the theft to the police. You may want to contact your homeowner's insurance to see if it would be worth filing a claim with them also.
    ~Lyssa

  • Hello, I'm pretty sure my fan on my 2009 mac book pro has stopped running. Would this cause the computer to slow down and take for ever to boot up and show the color wheel every time I select an application ?

    Hello, I'm pretty sure my fan on my 2009 mac book pro has stopped running. Would this cause the computer to slow down and take for ever to boot up and show the color wheel every time I select an application ? how involved to replace fan ? cost ?
    thanks

    Not directly, but if the CPU overheats because of incompatible software, that would cause slowdowns. Do not allow the computer to run if the fan is not working unless you wish to fry your motherboard. Please make a Genius Appointment and take it in for service.

  • The screen on my Mac Book Pro has gone black. It has a cursor that responds to touch pad, but black screen won't go away

    The screen on my Mac Book Pro has gone black. It has a cursor that responds to touchpad, but is otherwise completely black.

    Blank (lighted, but black) screen with cursor at bootup
    [SOLVED] - Macbook Air Sleep/Wake problem
    Dark screen on start-up can only see curser

  • My mac book pro has a white screen and won't start up

    My Mac book pro has been running slow, so I thought I would shut down and reboot. It wouldn't reboot past a white screen and an apple logo. I have rebooted several times and after an hour or so it still won't go any further. Any suggestions?

    Howdy Lowana42,
    Welcome to Apple Support Communities. 
    It sounds like your MacBook Pro has a startup issue that is causing it to only display an Apple logo. Try the suggestions in the article below, they will resolve most issues like this one. 
    How to Troubleshoot iSight
    I hope this helps, 
    -Jason

  • I think my mac book pro has a virus - is that possible and what can I do?

    I think my mac book pro has a virus.  Is that possible and what can I do?
    I opened an attachment on an email claiming to be an order confirmation from Amazon.  I now have several copies of it on my desktop and can't delete them.

    theforgebridget wrote:
    I opened an attachment on an email claiming to be an order confirmation from Amazon.  I now have several copies of it on my desktop and can't delete them.
    It is highly likely that this attachment is malware. It's also highly likely that it is Windows malware. So you're probably not infected with anything. What is the exact name of the attachment you opened? Please be sure to include whatever extension the filename has (such as .exe, .pdf, .doc, etc).
    What happens when you try deleting the attachment files from your desktop? Is there an error message of some kind? If so, what is the exact error message you're seeing? (Please don't try to paraphrase it... tell us the precise wording of the message.)

Maybe you are looking for