HT1338 Safari Hide command doesn't work

Now my Safari 6.0 "Hide Safari" command doesn't work (whether clicking the command-H or going up under the Safari menu and down to the Hide Safari command.
Any suggestions anyone? I am about one more issue away from abandoning Safari altogether and just using Chrome and Firefox.

I've made a number of iWeb websites. I notice that I can't "Command +" the text larger or smaller. Is this a function of an iWeb site .. or is there something I'm missing?
What browser are you talking about? If Safari, is it the same with the other major browsers (Firefox and Opera)? Could you provide the url of an example?

Similar Messages

Safari 6.0 command- doesn't work

Command+ works fine but command- doesn't work. I'm running 10.7.5

Just add the following to the file com.apple.WebProcess.sb.
Please add it below the Basic system paths and above the FIXME: or System and user preferences:
;; Plugins
(subpath "/Library/Internet Plug-Ins")
(home-subpath "/Library/Internet Plug-Ins")
And it's fixed!

HT1338 when i open youtube in safari, the sound doesn't work? This started happening when i downloaded mountain lion.

Since downloading Mountain Lion, when I open youtube in Safari, then sound doesn't work. Also I started receiving dupolicete email

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT5502 AFTER UPGRADING TOMOUNTAIN LION SAFARI 6.0 DOESN"T WORK HOW CAN I REPLACE IT OR UPGRADE IT?

AFTER UPGRADING TOMOUNTAIN LION SAFARI 6.0 DOESN"T WORK HOW CAN I REPLACE IT OR UPGRADE IT?

An answer will require more specific information of the problems you are experiencing Mpittas2.
In general, if you installed any third party anti-virus utilities, get rid of them. They can cause problems like this.
There is no need to post your question multiple times. If you don't get an answer right away give it some time, a few hours at least, and please deselect your caps lock key. This will increase the likelihood of receiving competent assistance.
Thanks!

Visually handicap, needs to increase font size in logic pro, Command doesn't work

Hi,
I'm visually handicapped, and new to logic-pro. I'm having a miserable time reading the internal logic-pro fonts. Command + doesn't work, and I can't find any preferrence or settings options that affect the default font sizes, any ideas?

Unfortunately you cannot change the font size of the main fonts in Logic...
However, there are a couple of other settings you may not be aware of...
1) Under Logic Pro's preferences... go to Display
Now you can change the size of the playhead and Local Windows under the General Tab
You can increase the size of the Logic plugin windows/fonts sizes under the Mixer Tab (I have mine set to 200%)
Note: This setting does not apply to 3rd party plugins.. only Logic's own plugins...
Under the Piano Roll tab you can change the size of Bar/Beats/Division Lines...
2) Using the screen zoom command... Hold down control and scroll on your mouse... will zoom in the screen...
Note: as you are using Mountain Lion there is also a new setting under System Preferences/Accessability
Choose Zoom on the left hand side
Now choose Zoom Style/Picture in Picture and instead of a full screen zoom it provides you with a magnifying glass of sorts to just magnify the area arund your mouse pointer. I find this setting very useful....
Hope this helps...

Bash command doesn't work after update

I just ran pacman -Syu as normal, but some got many errors like below:
( 3/11) upgrading binutils
error: command failed to execute correctly
and every package except kernel-headers got a error message like that. and then i found most of my bash command doesn't work any more, just like ls and vim. However, some others like pwd and cd still work correctly.
Any one any ideal?
Last edited by ranjiao (2009-11-12 13:26:01)

ranjiao wrote:I removed /lib64 and make a soft link from /lib64 to /lib, as Matlab09 requires a /lib64 containing crt libs.
is this the cause?
Yes.
I've done that before and got into the same problem when updating glibc, the lesson here, don't mess with the default directory structure.

Unhide library command doesn't work

Unhide library command doesn't work in terminal

Open the Terminal application in your Utilities and paste the following at the prompt:
sudo chflags nohidden ~/Library
Press RETURN. Enter your admin password when prompted. It will not be echoed.
The "sudo" may not even be required, but if it is and you don't use it, then you'll get an error message. Just try again using the above command.

I am trying to download a file from Safari. It doesn't work.

I am trying to download a file from Safari. It doesn't work. It always comes up with a notification saying, 'Safari could not download this file'. Why does it do that? More importantly, what should I do? how do I download it?
Thanks to the users who reply to this. It will help me a lot.

What type of file is it?
If safari can't natively open the file, or there is no App installed thatr can, it won't download.

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

This any help?
http://support.apple.com/kb/HT1526

IOS 5 Safari Reader mode doesn't work on an iPad 1º generation

iOS 5 Safari Reader mode doesn't work on an iPad 1º generation. How can I fix that?

Hi. I am having the same problem on an original iPad. The tabbed browsing works fine, but no "reader" button is showing up in the URL window at the top...
Anyone else seeing this and is a reinstall of ios5 really needed?
Thanks

Safari for Mavericks doesn't work since upgrade.

Since I did an 'all upgrade' mid-June 2014, Safari is too annoying to use. It just gives me the Top Site pages every time I open, won't load my web archive pages or anything else. (It will load a site if I've closed it as a 'faorced quit and reopened - and then can sometimes get it to do an 'open in new tab' from the reading list only if online, otherwise only does 'top sites'. It All started when I realised it wasn't letting me see any of my downloaded reading lists (watched the download progress so know it did that). I've tried changing all sorts of things (just about everything once then checking ou and in again includng clearing cache etc. in preferences but basically it doesn't accept anything and just defaults back no matter what!
Gave up and using Firefox for this but would much prefer to use Safari if it will only work as it used to - maybe that alway meant it Never let me access reading list offline?

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Priority class command doesn't work with a certain program

Hello folks,
I'm trying to automatize the priority class setting of a program named FreeTrack through a command written in the shortcut. Hence in its "target" I've written this (I'm using Windows 7 x64):
C:\Windows\System32\cmd.exe /c start /REALTIME /AFFINITY 8 "" "E:\Program Files (x86)\FreeTrack\FreeTrack.exe"
As you can see I also wanted the affinity mask of the program to be set automatically upon launch, and it works fine. The issue is that the priority class remains unchanged to normal.
I've tried removing the "affinity" command but it didn't work.
The priority command does its job on another program (for the attempt I used Firefox).
Is there any explanation for this anomalous behaviour? And, most importantly, is there a solution (which preferably doesn't involve installing additional programs) ?
Thank you and regards

All right, I've found a solution; I'll post it for anyone in need. It's not particularly elegant but still functional.
First of all I've created a .cmd file in the folder where is located the executable of my interest.
In it, using notepad, I've written as following:
start /affinity 8 FreeTrack.exe
ping 1.1.1.1 -n 1 -w 2000 > nul
wmic process where name="FreeTrack.exe" CALL setpriority 256
Note that the /affinity command is optional and not required (however, I needed it). Replace "FreeTrack.exe" with the name of your executable.
The ping part pings a fake IP once and then waits 2000 milliseconds (set a higher waiting time if this one doesn't work).
The third line changes the priority for all the processes under the name of "FreeTrack.exe" to, in my case, realtime.
Priority legend:
Low: 64 Below Normal: 16384 Normal: 32 Above Normal: 32768 High: 128 Realtime: 256
Since the command prompt window appears for 2 seconds and I don't like that, I've created a .vbs file in the same folder of the .cmd file and executable. This hides the cmd window.
I've put the following into the .vbs file (edited with notepad):
Set WshShell = CreateObject("WScript.Shell" )
WshShell.Run chr(34) & "FreeTrack.cmd" & Chr(34), 0
Set WshShell = Nothing
Replace "FreeTrack.cmd" with your .cmd file name.
I've then created a shortcut on the desktop to the .vbs file and changed the icon to the one of the executable.
Surely this solution won't work if the program keeps reverting back its priority while running.

Unix Command doesn't work in Tiger

Hi,
I've got labs of eMacs that I'm finally upgrading to Tiger. My image seems to work fine, but I'm running into a weird quirk with my "Send Unix" commands via ARD. We're doing NWEA testing and LOVE the unix commands because we can login to machines, turn on TestTaker, login to TestTaker, and select the correct test (math or reading) and the right version of the test.
The script below works fine on a panther eMac.
osascript
tell application "System Events"
keystroke "1" using command down
delay 3.0
keystroke ASCII character 31
delay 2.0
keystroke return
keystroke "n" using command down
end tell
On my Tiger machines, the command stops on the:
"Keystroke ASCII character 31" line (this should arrow down to next test version).
A report window comes up in ARD with this error message:
86:104: execution error: System Events got an error: 31 doesn't understand the ASCII character message. (-1708)
This used to work perfectly, but now I can't get ASCII 31 (or arrow down to work). The real killer is that other techs in my school district have eMacs running tiger with same commands that work (some have to arrow down 16 times to get to correct test version). The other commands (like command 1 and returns, command n) all work fine! Hate to have to touch 80 machines each day to select proper test version when we log in.
Any Suggestions????

Try this form of the line:
keystroke (ASCII character of 31)
That's worked for some people. Hope it works for you. If it doesn't work as given, try without the parentheses.
Regards.

The "hide" shortcut doesn't work

Hello, I want to know why the shortcut "hide bottom" (control E on PC) doesn't work on my illustrator, I need to install all the program again?

Lea,
I am afraid this is what you have (Object>Hide>Hide All Artwork Above being quite useful but rather the opposite):
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-62b8a .html#WS714a382cdf7d304e7e07d0100196cbc5f-62b6a
The concept exists, but in other contexts:
https://www.google.com/search?as_q=&as_epq=hide+bottom&as_oq=&as_eq=&as_nlo=&as_nhi=&lr=&c r=&as_qdr=all&as_sitesearch=&a…

Restart command doesn't work

I believe the following problem began when I updated to 10.4.9. I can't be absolutely sure but the timing seems about right. I've since updated to 10.4.10 in an effort to fix it, but haven't succeeded.
The problem is that when I select the Restart command in the Apple menu the computer will begin the process, all open apps will be quit, the finder will quit, my desktop will go to blue to a few seconds. Then the monitor will go blank. Then nothing after that. I DO NOT get the startup chime. The machine is still powered on, the light above the power button is still lit. If I leave the machine for any length of time the fans will start speeding up gradually until they're at full tilt. After 4 or 5 minutes it becomes obvious that nothing is going to happen, so I need to manually shutdown via the power button.
Does anyone know what logs I can post here to help in the diagnosis? This also happens if any installer application needs to perform a restart, ie Software Update.
Thanks,
Chris

Hi chris catalano-
I have had updates make my machine do some crazy stuff just as you describe. I would actually let it go for 15 or 20 minutes before declaring it a no-go.
If that doesn't work, try resetting the SMU and see if that helps: How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)
Luck-
-DaddyPaycheck

HT1338 Safari Hide command doesn't work

Similar Messages

Maybe you are looking for