HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

do you mean the printer? ive already tried that without success any further help apprecaited

Similar Messages

I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion

hi,
check this link for Mac 10.7 installation guide.
l0ri3
~Though I work with HP my posts and replies are my own and not from HP.~

HT1338 since updating to mountain lion i have noticed a considerable decrease in the performance of my iMac - most notably when loading pages on the internet. Is this common and is there a fix?

Since updating to mountain Lion, it's like being back in the 80's taking 30 seconds to load a page? Is this common or are there any ideas? I've checked my router and my ISP are all in order. Whilst the mac is wired to the router, everything else in the house is running fine off the wifi network. I am not very technically minded so any help is appreciated.

Which model and version of iMac do you have, AND more importantly, How many GB's of RAM do you have? Mountain Lion has shown itself to be very memory intensive in operation and the bare minimum amount of RAM to achieve any system speed is 4 GB's, according to other Forum users' experience, and mine. And more RAM than that speeds it up more.
Hope this helps

Since updating to ios 7 my camera on the back of phone will not work,

I updated to ios 7 yesterday and now the camera on the back of my 4s will not work, it freezes, i downloaded other camera apps but still no joy, the camera on the front of phone works fine but the rear is gubbed, can anyone help or is this a case of waiting for update to fix the bugs and if it is why oh why was this update released when faults were known

hello,
my 4s was in os6 and when os7 first released, i have updated it. during update from os6 to os7 after 98% my wifi got disconnected and then phone automatically restarted. since then my back camera is not working. front on is working perfectly. after that i reinstall os7 properly following step by step procedure but no positive result came out.
then i tried to change the camera with a new one but still with new camera the problem is same. then they used my camera in some other 4s and it is working fine. now i dont know what to do.
right now using os7.1.2
please advise.
Salman

Since updating to mountain lion i-movie reports not enough memory to send video to Idvd,I know there is ample memory as i have the full amount of memory installed and it is all working,help pls

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

UPDATING OSX MOUNTAIN LION ADOBE VIEWER. recently received e-bill statement. could not view. site recommended updating adobe viewer. as this feature comes OEM from Apple, how is this accomplished?

UPDATING OSX MOUNTAIN LION ADOBE VIEWER. recently received e-bill statement. could not view. site recommended updating adobe viewer. as this feature comes OEM from Apple, how is this accomplished? Note, this was an online view for the PDF document.

Thanks for your help. Final question. So I am assuming that PDF funcitonality is accomplished via Preview. I assume then that the PDF creation in Mail is also similarly accomplished, that is not via an Adobe product, but equivalent funcitonality. I see now that I can download Adobe. But, does the Apple PDF equivlant provide updates to keep up witht the new encoding structures released by Adobe, so that I can only update the Apple equivalent, or is this not practical because Apple would be chasing Adobe for software updates?

Trying to download mountain lion but password I used to download it will not let me install it. Why?

Trying to download mountain lion but password I used to download it will not let me install it. Why?

Welcome to the Apple Support Communities
If you don't remember your password, see > http://iforgot.apple.com

Since upgrading to OS X yosemite my printer will not work.

Since upgrading to OS X Yosemite my printer will not work.

I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd

I upgraded from leopard to lion and my epson printer will not work. I get a communication error

I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Just installed HP BIOS Update. HP 6110 all in one printer no longer works.

Just installed HP BIOS Update. System no longer recognizes my printer (6110 all-in-one). HP web site says driver is in OS and should be recognized, but only driver that is close is 6100 series and it does not work.

Hey thecityhouse,
When you are selecting the driver from the available drivers list did you make sure to press the Windows Update button at the bottom right to prepopulate the list? This may have to be performed to get the proper driver for your printer.
If this does not work, then I would take a look at the information in the post found here. It may provide a workaround to the issue you are experiencing.
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Problems with my Time Capsule since updated to Mountain Lion

Since I have updated my MacBook Air (late 2010 model) to OS X Mountain Lion, I am experiencing problems connecting my Macbook Air to Time Capsule and experiencing problems in Time Machine copies to the Time Capsule:
1.- When I turn on my computer, Time Machine starts working, taking a lot of time searching the backup disc (my Time Capsule), then appears an error message (Can not find the disk or it says that the Time Capsule is already in use);
2.- After several attemps (restarting the computer and restarting the Time Capsule), sometimes Time Machine starts to work, but it shows that it has to copy approximatly 28 G. Also the copy is to slow (it only copied 500 Megabytes in two days).
In the meanwhile the Time Capsule light is turned on (green) - so it seems the Time Capsule is working normally an the problem would be Time Machine.
I would not like to restart everytime my Time Capsule or restart my computer in order to make Time Machine works. I would really appreciate help for solving this problem (I apologize for my so basic English).
My Airport Utility Version is 6.1 (610.31)
My Time Capsule Version: 7.6.1.
My Computer: MacBook Air (late 2010)
My System: OS X Mountain Lion (when I used OS X Lion all was working normal)
Thanks in advance for your help !!!

The first backup after an update will be quite slow (but shouldn't be anywhere near that slow). And the searching on the backup disk will have to be repeated on every backup attempt until one completes normally.
Connect to the TC via an Ethernet cable.
Also see the green box in #D2 of Time Machine - Troubleshooting. Something there may help get back on track.
(and your English is fine -- better than many who speak it natively, I'm sorry to say.)

My HD makes permanent noise since updating to Mountain Lion

Hello guys,
since I updated my mbp early 2011 to Mountain Lion the hard drive makes a permanent noise as if the little disc in there would run all the time at full speed. I already did everything described in Forums and TechBlogs throughout the web. It's not the spotlight indexing, I don't have many apps and stuff running, I did reset the SMC and PRAM or VRAM, I checked console and activity monitor for noticeable information, I played around with various options in various programmes, I updated everything and deleted unimportant stuff... But nothing...
While I looked through the Internet I got to know, that this noise is kind of common to early 2011-mbps. But I can't take that for an answer, because I haven't had that noise while running my mac with Snow Leopard.
Has anyone an idea what I can do to solve this? Again, I don't believe it's a hardware-problem since the noise began with Mountain Lion.
Bye

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Ever since updating to Mountain Lion, I cannot watch live streams.

Hey, since updating to ML, something seems to be interrupting how Flash is working.
I am unable to see live video streams in the browser.
When I try to use VOKLE, for example, it seems to load fine and then I get an error from Vokle telling me to make sure I have an internet connection and allow RTMP traffic. Same story with Stickam, it connects but then shows me a blank screen.
I've tried:
Reinstalling Flash and messing with the settings (allow storage of data etc.).
Chrome and Safari
Disabling OS X Firewall & Sophos
Nothing seems to work, I haven't had this problem with Lion and I am pulling my hair out!
MSN messenger refuses to sign in also, this seems related to me maybe, it just tries for a long time then fails.
It seems like there is something blocking incoming connections BUT WHAT?
Thanks.

Same problem with Windows 7 using boot camp! O:

Since updating my iPod to iOS 5.0.1 my docking station will not charge my iPod or play my music. I can charge my iPod using a USB plug or my laptop. Can anyone help please?

Having updated my iPod 3rd Generation to iOS 5.0.1 my Philips docking speaker is unable to charge or play my music. It recognizes it for a second then unrecognizes it, then recognizes it, then unrecognizes it. It is like it is having a hissy fit everytime I plug my iPod into it. My iPod beeps when I initially connect it to the speaker but then it disconnects itself after about 2 seconds. This has only started happening since updating to iOS 5.0.1 last night. Please help!!!!!

Have you tried the standard fixes:
- Reset. Nothng will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restoring from backup
- Restoring to factory defaults/new iPod
Have you also contaced Philips?

HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

Similar Messages

Maybe you are looking for