HT1338 Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

I think what may be your main issue here is that the 2011
server has the Intel integrated HD3000 and is is struggling
to run both a Thuderbolt display and a second monitor.
When looking at specs for Thunderbolt Display, it is stated
that the 2011 Mini Server can only support one.  Adding that
Dell monitor with 1920x1200 display may just be too many
pixels for the HD3000 to handle.
You may want to try setting the Dell to a lower resolution
to test the theory to see what happens.  It is however,
possible that any additional monitor when using the Thunderbolt
display may over tax the HD3000 graphics.
FWIW personally, I have been running a 2011 Mini Server w/ Thunderbolt
display for almost a year now without any issues.  However, I don't
use a second monitor.

Similar Messages

  • HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

    I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

    Have you tried restarting the printer? Reboot the iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Trying to update iTunes but keep getting the error messag "the url could not be opened" when it's always worked fine in the past. What does this mean?

    Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!

    Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
    tt2

  • Apple USB Keyboard not working when connected in Macbook PRO retina

    I have this problem. When I connect my new Apple usb keyboard directly to the laptop it does work. Is there any way to solve this problem?
    BR

    I just did the latest update and my Apple USB keyboard stopped working. The keyboard works fine with other computers and other keyboards work with my Macbook.
    The keyboard ships with a three foot extension cable. I plugged the keyboard into the Macbook with this cable and now it's working fine. I think it has something to do with the USB port being 3.0. A USB hub may also solve the issue.
    JD

  • I have a replacement Note 3.  My Vodafone SIM, which worked fine in the original, fails in the replacement.  When I try to access Settings, the menu briefly flashes, then the phone reverts to the home page.  Will a Factory Data Reset fix this?

    Hi,
    I have a Note 3 and a Vodafone SIM that are not playing well together. 
    The history is:
    I got my Note 3 over 2 years ago.  We visited Italy 2 years ago and I bought a Vodafone sim at a Vodafone outlet.  Everything worked perfectly during that trip and a subsequent trip to France.
    Last October, I had to replace the Note 3 because the camera was failing.  I had insurance, so the insurance company sent me a refurbished Note 3. When I tried to use the SIM last December, the Note 3 had problems. When I put the SIM in and started the Note 3, the phone recognized the sim (but gave me an error that, according to Verizon, is spurious).  I could make phone calls but I could not access the data network.  In order to access the data network, you have to go into Settings. More Settings, Mobile Networks and set the Access Point Name.
    With the replacement Note 3, I cannot access Settings.  As soon as I try to access Settings (with the Vodafone SIM installed), the Settings menu appears and then immediately the home screen comes up.  After working with Verizon for over an hour, I was able to get into Settings and set the access point name by booting into Safe mode.  But as soon as I rebooted into 'normal' mode, Settings failed and I could not access its menu (to turn on wifi, for example).  There are a couple of other apps that did the same thing - but I cannot remember which ones.
    I have talked to Vodafone - they have no clue.  I talked to a Samsung rep I ran into at Best Buy, he thought the Vodafone SIM might be corrupted.  And now a Verizon tech I talked to last week thinks it is a firmware problem on the phone and I should do a Factory Data Reset.
    Have you ever heard of this problem?  What do you think might be causing it?
    Thanks for your help.

    On2CO,  I'm glad you have reached out to us today. Thank you so much for the very detail description on what is going on with the device. Sounds like there might be an issue with an application that might be causing these issues. The reason I say that is, when the phone is in Safe Mode you are able to access the Settings screens with no issues. While in Safe Mode that does block all 3rd party applications from running on the phone. I would suggest on trying to back up the device and perform a factory reset: http://spr.ly/6-182Vuo (you would want to make sure to uncheck Automatic Restore in step 3). Once the reset is complete try to see if you can get into Settings. Then, I would recommend on adding 3rd party applications back on to the device one by one to see if we can find what app might be causing this issue. Please keep us posted if you have any further questions or concerns.   KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Liquid Spill Dispute--Anyone Have Advice/Similar Experience?

    I sent my 15" MacBook Pro into the Apple service center for repair because some of the keys had stopped working, it was making that infamous whining noise, as well as doing the equally infamous random shut off.
    Apple is now claiming that the defects are the result of the insides being trashed by some kind of liquid spill, the warranty is void, and I owe them $1000 for a new LogicBoard. I can confidently say that I've never, ever spilled ANYTHING into that computer. Not beer, pop, juice, wine, or even water. Hair, dust, and crumbs I'll own up to. But an all-corroding spill the kind of which they're claiming has happened? Not a chance.
    I've got no idea what to do. The representative I talked to today was NOT helpful--she just kept repeating the same thing over and over again. I'm not sure who I need to talk to or what I can do to get this thing repaired under Applecare.
    Has anyone had a similar situation--or know of any possible vindication available to me?
    macbook pro 15"   Mac OS X (10.4.8)  

    Thanks everybody for all of your help and advice so far. I have a couple questions regarding some of your replies.
    First and foremost, BeProf:
    I've got a sinking feeling that you're right. You said you've been on both sides of the same situation. If you don't mind, can you elaborate on what happened when you were on my side of it?
    When you guys (or girls) are talking about getting a second opinion or taking it to an Apple Certified Service Provider, are either of these options steps toward getting any use out of my warranty? Principle aside, I'm afraid my available fundage for this project is pretty much nil. Even if we're talking getting charged less than what Apple is asking, I'd probably opt to keep using my unreliable computer as is.
    Boece: I know what you mean about an insurance claim--that's why I'm not seriously considering that route either.
    No, no one used the word corrosion. "Liquid damage" was as specific as it got--no indication of what kind, how much, where at, what's broken, etc. All I know is that there's liquid damage and lots of it. I did go ahead and ask for pictures and more details, but I'm not crossing my fingers that the story is going to change. Not without some kind of ammo--is this what a second opinion will do for me?
    No, I don't live near the ocean. The computer has spent extended periods of time in beachside neighborhoods (Venice, Colombia), but wasn't really getting opened or used. Never on a beach.
    I don't know how much fight I have in me. I can make noise, or talk to people who will make noise for me, those are about the only tools I have at my disposal. I'm fighting hard with the urge to be self-righteous--I know that's not going to get me anywhere. But I'm sad and more than a bit steamed that this computer is looking more and more like a $2233 mistake and that I'm not even getting the redress that I paid for.

  • I have an Ipod classic 30 GB U2 , it s been working fine for the past 3-4 years until now it starts to get stuck when navigating the menu or even when clicking something,Basically i am only able to use it as a storage device not its ipod features

    It is recognized via Itunes as IPOD and i am able to connect it through USB cable to the pc and manage its physical memory via My Computer. But the problem is I cannot use anything on it as an IPOD (Like Music video and note stuff inside it).It boots as saying its got low battery power and after a while "Do not disconnect" logo appears after it is charged, i am able to operate it as normal ipod but when i click something it gets hanged like a PC and it stays there until the battery is too low . No matter what button i press (Menu or play buttons) continuously or the combination to restart or reset its in the same static state,,no reaction...even when i connect it to the pc via USB or charger nothing happens ..it stays in the same screen whereever i navigated last. After all its power is used up the same process continues that i can use it as an external hard disk namely its 20 GB memory...
    Is there any way I can solve this problem via Itunes restore or any other used method to restore it to factory settings ?? ...I haven't used any method to restore it until now as i have migrated to IPAD,,,since then i've been using this as an external hard disk....may be if its restored to old condition i can carry this where ever i want unlike the massive IPAD...its like carrying a solar panel unlike an handy IPOD

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • I have had an iPod Touch 3rd Gen for two years and the apps have worked fine in the past. Suddenly the apps will not launch, they appear to start then just exit. Is there a reason why it is doing this?

     I have had an iPod Touch 3rd Gen for two years pretty much and the apps have worked fine. Suddenly when I go on an app it appears to launch then just exits. I tried turning the iPod off and on again, but that made all my apps behave like that. Settings and those things work fine still. Should this suddenly happen? I dont want to lose all 204 apps.

    - First try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try downloading/installing a new app
    - Restore from backup
    - Last, resore to factory defaults/new iPod.  this is last result since you will lose app data.

  • IDVD changes encoding quality in the middle of burning a DVD.  This causes the DVD to run out of room for longer projects.  This worked fine for the past two years, and in the past few weeks it started having this problem.

    Here are details on the problem:  I'm running iDVD 7.1.2 on an iMac that uses OS 10.6.8.  After about two years of using iDVD to burn both single- and dual-layer disks, I find I can no longer burn dual-layer disks.  When I put in a dual-layer disk and try to burn a project, the project size keeps increasing.  For instance, I recently tried to burn a project that was just over 4GB and, when I stopped the project part-way through, the project size read as 6.89GB.  If I don't stop the project in time, the blue bar that indicates burning status reaches the end (so that all of it is blue) before the time listed has elapsed and the disk ejects but cannot be recognized by the computer or our dvd player.  If I then go to the project menu and switch the encoding from Professional Quality to Best Performance and back again, the program "remembers" the actual file size - but, if I try to burn the project again, I have the increasing same problem.  If I let the project go until the disk ejects, the project menu will then read some total in the red (i.e., above the size that a dl disk will burn, even though the actual file size is below the limit).  I believe (perhaps 90% sure) this began after I tried to encode a movie with subtitles; instead of burning properly, this movie created a data disk with at least one folder that said something about VIDEO_TS, if I recall correctly. 

    To be a true video DVD the disk must be in the UDF format (Universal Disk Format) and must have a AUDIO_TS folder (empty) and VIDEO_TS folder (where all the elements of the DVD are located).
    The content on a DVD is MPG-2 encoded and it is quite possible for the encoded size of your content to exceed the estimated project size - especially if you use lots of transitions and content encoded with CODECS more recent than mpg-2 (which is quite old at this point).
    The safest thing to do is to make your 'burn' to a disk image file - then you know everything went fine before you commit to burning a disk,  I know the instructions warn about creating a disk image file for dual-layer projects, but I've never had any problems and don't recall hearing anyone here who had problems.

  • I have an apple tv but lost the controller I connected my apple tv to my internet with an ethernet cable and it worked fine for the past week it has now stopped working

    id also like to mention that before it stopped giving me the option to use airplay on my iphone, i had disconnected my apple tv because it was in the sun while i was watching it, and a message popped up  saying "temperature: your apple tv is over heating. this message will dissapear when your apple tv is ready,"

    Take it in to Apple

  • When using Dreamweaver, I go to preview in browser (Firefox) and nothing comes up. It was working fine in the earlier version of Firefox. Is there a setting I need to change?

    '''bold text'''

    I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
    I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
    So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
    I hope this helps some people.

  • I am dissatisfied with my ellipsis tablet is has be nothing but problems. since i bought it, anyone have a similar experience?

    its about a month old and i have had to enter the PUK code about 4 times and already a total reset i have called and complained and Ashley the manager i spoke to said she would call me back a day later her self and to no surprise i never received her call. I am fed up

        I understand your discontent Godfrey814! It is very strange to have these issues with multiple devices. While the store in unable to exchange your device after 14 days from purchase, your device is still within the manufacturers' warranty and it is eligible for a Certified Like New Replacement http://vz.to/uyYF0o if it is determined to be defective. Are you following the steps at this link http://vz.to/1gRiRcv to do a hard reset?
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • When FF restarts my "browser.newtab.url" has been HIJACKED, it works fine if i reset it BUT on restart its back were it was ? HOW CAN I FIX THIS ?wstfbe

    when FF restarts my "browser.newtab.url" has been HIJACKED, it works fine if i reset it BUT on restart its back were it was ? HOW CAN I FIX THIS ? have reset it 20 times works fine while program FIREFOX Runs if program or OS shuts down its HIJACKED AGAIN.
    there must be a file or location that is ONLY USED ON LAUNCH, That has been modified or hacked.
    small clinch that is driving me nuts.
    Thanks RMY

    What is "browser.newtab.url" changed to?
    Knowing that may lead us to a solution as to what Malware your PC is infested with.

  • I received a message to upgrade my Firefox , when I upgraded to Firefox 6.0.2 it says (The proxy server is refusing connections .) I had a copy of Firefox 3.5.5, which works fine.

    I received a message to upgrade my Firefox , when I upgraded to Firefox 6.0.2 it says (The proxy server is refusing connections .)
    I had a copy of Firefox 3.5.5, which works fine.

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Please update Firefox to the latest version via "Help > Check for Updates or Help > About Firefox"<br />
    The Firefox 3.5.5 version that you use is no longer maintained with security and stability updates.<br />
    Using unsupported Firefox versions is at your own risk and makes you vulnerable to attacks.<br />
    Users of no longer supported Firefox versions are strongly recommended to update to the latest release that is supported by their system.
    *Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    *http://en.wikipedia.org/wiki/Vulnerability_(computing)
    *http://www.mozilla.org/security/known-vulnerabilities/

  • Why does my retina MBPro and the projector go blank, when connecting with HDMI? This worked fine until the latest OS and firmware update.

    Connecting through HDMI worked fine, until the recent firmware update and the 10.7.5 OS update. Now, both retina display and projector dosplay go blank, with the screen coming back when unplugged from the projector.

    Clone your system.
    Never apply updates w/o one.
    And yes there is a page with all the Apple Downloads to do manually and then you can keep it on hand. Same for the OS X Lion or ML installer - save them before running. Still on 10.6.8 so you have OS X 10.6 DVD.
    Combo updates do not do any harm. There could be issues to the drive directory beforehand.
    Mac Pro has been shipping with Lion since summer 2011, though you can even now still reinstall iwth 10.6.4+

Maybe you are looking for

  • Question about redo generation

    select * from v$version; Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production PL/SQL Release 11.2.0.1.0 - Production "CORE     11.2.0.1.0     Production" TNS for Linux: Version 11.2.0.1.0 - Production NLSRTL Version 11.2.0.1.0 - Pro

  • Problem in Multisim with transient analysis and initial conditions

    Hello everyone, I have a problem in multisim with transient analysis and initial conditions. If I do transient analysis with automatically determined initial conditions the circuits works. If I do transient analysis with user-defined initial conditio

  • Using bind in CATSEARCH structured query

    We used to bind the whole query string inside CATSEARCH, like this: AND CATSEARCH(a.title, 'test', :s_query) > 0 and bind s_query to 'id = 1234', and so on. However, it looks like the statement cache does not like this kind of query, and will cache a

  • Uploading photos from Aperture to Flickr

    I created an album using the "Share Flickr" option in Aperture, which is now showing that it's syncing with Flickr. However, I can't locate the album in my Flickr account. This is the first time I've tried using this sharing option. Probably missing

  • Listener: ORA-00604 ORA-01219

    We have a database on 10.2.0.5.0. Sometimes we are able to login, sometimes we get the error below (this is from the client, on the server it works): SQL> conn dba@tst ERROR: ORA-00604: error occurred at recursive SQL level 1 ORA-01219: database not