HT1339 I did a reset on my iPod, the a restore now I can't do anything with it, turns off and on all the time, is there anything I can do cheers
i did a reset on my iPod, then a restore now I can't do anything with it, turns off and on all the time, is there anything I can do?? cheers
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My ipod touch will not charge or register in itunes. It keeps turning off and then shows the apple logo. I have tried holding down the button and plugging it in. It will show the red battery for a second and then turn off? Any other suggestions?
I have checked for problems with the connections, but from what i can see with the naked eye, nothing appears abnormal. It is very strange, and very sudden. It just stopped in the middle of a charge. The apple store is my next step. I just wanted to see if anyone on here had some extremely eye-opening solution or check. thanks though!
I'm also within warranty, so it's not a huge problem. -
MY Ipod touch frequently turns on and off please help!!!
Try connecting the iPod to its syncing computer and restoring the iPod.
If you can't restore, see if resetting the iPod will allow a restore:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
If that was unsuccessfulm see if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod and in her own iTunes?
Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.
-
IPod turned off and on for the first hour
When I plugged in my brand new iPod Nano for the first time to the cable into my nice iMac, it turned off and on for the first hour with the phrase on screen "Do Not Disconnect." I am guessing that the reason it was turning off was because it didn't have enough juice/power. But then why was it turning on? After an hour it finally had enough juice to stay on. What gives? Do I have a defective iPod? It works fine now. I've never had an iPod before so I don't know how it's supposed to work.
Each time the iPod has run out of power, I get the same symptom. It turns off and on for an hour until it has enough juice to stay on.Maybe someone in the iPod nano Forum would know the answer? You've posted in the 'Using iTunes for Mac' Forum.
You can find the Category page for the iPod nano here:
http://discussions.apple.com/category.jspa?categoryID=154
Please note that is a Category page. You may want to select the First or Second Generation Category or select one of the Forums directly from the list.
I have a nano but have not encountered your problem. Hope you find a solution.
Regards,
Colin R. -
i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks
See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I left my ipod touch at a friends house. She doesnt have internet. So it's not connected to the internet. And I had never charged it so it's been dead for about a week now. Can I use iCloud while it's turned off and not connected? Like, will it show a message and ring if it's not connected to the internet and turned on? Please help me ): I really need to find it!!!
" Can I use iCloud while it's turned off and not connected? "
No.
"Like, will it show a message and ring if it's not connected to the internet and turned on?"
No.
There is nothing you can do other than look for it, -
I have a new iPod Touch. I also run Windows 7 on my desktop PC. I have tried to post pictures from my PC to the iPod. But the only way you can do this that I know of, is to create a subdirectory on the PC and put all of your pictures that you want on the iPod in that subdirectory. Then you must use iTunes to synchronize the PC subdirectory with photos on the iPod. But I want many subdirectories to organize my pictures on the iPod. Can you do this??, it doesn't look to me like you can!??
Thanks TomYes.
tomfromlong beech wrote:
"Remember one one level of subfolders is allowed." Does this mean that you can have as many subfolders as you want, but they can only be one level deep under the main folder? -
Did a reset on my ipod i just bought now it wont come back on
can anyone help me out on how to fix it
Hi,
You may have to:
a. Restore your iPod via iTunes.
b. Place your iPod in Recovery Mode.
Hope this helps!
---likeabird--- -
please help me find my ipod i shall be thankful to you
Hey Jatin, Look under the sofa. Any luck? All joking aside, not much to do here, nothing with electronics anyway. You'll have to do the, "Helen Hunt Method!" Go looking for your iPod like it was a lost wallet or set of keys. Good luck, happy hunting! Cheers.
-
I tried to put it on recovery mode but it doesnt work either. Before that, I tried to reset it using the reset options in the settings. Please reply as soon as possible
See here for troubleshooting iOS:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
(Skip the Restart step since you cannot access the red slider bar)
(Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple) -
HT1766 my iphone 5 just turned off and will not power on even when charging how can i reset it
How can i reset my phone , it was working fine yesterday and this morning it will not come on. My screen zoomed out then turned off
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?
when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?
Maybe you are looking for
-
DME - Multiple Vendors in single DME file not appearing
Hi there, I have created a DME structure and created PMW format , as required by bank, to generate DME text file. When i run the APP (F110) for single vendor ,, one DME text file is generating correctly, Now problem is when i run F110 for multip
-
When i boot my pc it come up with the 8xtreme logo ad stays there for about 3-4 mins but i have noticed that on my d bracket the led1 led is lit in red. I have also noticed that my onboard sound is not working but im not fussed about that seem as ivi
-
How to prevent display in scientific notation
I want to convert a large double value to a string, but when the value is greater than 10000000 , it will display in scientific notation , such as 3.435E8 However, how can I convert it automatically to 343500000 because there is an interface program
-
Remote Call to Blazeds and displaying the result set in grid
Hi, I want to call a remote method using Flex application from Blazeds and display the values in DataGrid. Can anyone help in this ? -- I am using AMFChannel -- The method to be called is PolicyApnVO.getPoliciesApn() -- Please advice any correction i
-
This morning I was working on a LVOOP project and was busy with password protecting the methods. Once finished I went working on the derived class and wanted to use the option to override a parent method. Bang. Epic. Fail. When you want to override y