HT1347 I just bougt Mp3 files lectures and can't drag/drop into my i Tune playlist. How do you do that?

I just bought MP3 files lectures and they are on my desktop. How do I put them in Itune as a play list? I tried drag and drop but it is not doing it.

Similar Messages

HT201301 I'm trying to convert an m4a voice note to either mp3 or wav and can't seem to get a straight answer on how to do it without a lot of jargon. Would appreciate the help.

I'm trying to convert an m4a voice note to either mp3 or wav and can't seem to get a straight answer on how to do it without a lot of jargon. Would appreciate the help.

Yes it does.
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
http://www.apple.com/ipad/specs/

No "Ringtones" tab and can't drag & drop ringtones into iTunes

I have an iPhone4 running OS4.3, using iTunes 10.2 on a Windows Vista PC. I used an iPhone app to create custom ringtones, and have followed the app's instructions to save the ringtones to my PC and then copy into iTunes. Two problems:
1) The instructions say to drag & drop the .m4r files into iTunes. I've seen this mentioned in other posts on this topic. When I try to do this, the files won't "drop". I see the "no" symbol (circle with line) when I hover over my music library.
2) The instructions say to click on my iPhone in iTunes, and then on the "Ringtones" tab along the top of the screen. I don't have a Ringtones tab. There's also no reference to Ringtones in the left navigation pane.
How do I correct this?
Thanks

!!! JUST DOWNGRADE YOUR ITUNES VERSION, AND USE THE OLDER ONE - THAT'S ALL. SORRY FOR ALL-CAPITAL LETTERS AND EXCLAMATION MARKS, - IT IS JUST OUT OF EXCITEMENT, AFTER HOURS OF SEARCHING AND THINKING ABOUT A SOLUTION !!!
Shalom all,
Our frustration and pain is over, for sure… With some help and hints from this forum I’ve found a precise solution to the above mentioned can’t-get-the-goddamned-ringtones-tab-to-appear-in-my-iTunes problem.
Now let me try and get up to the point:
The 10.5.2 version of iTune is worthless (at least, it’s 64-bit modification, which I’ve been using up to this point). By reading a few comments on your forum, I’ve quickly decided to try and downgrade to 10.4.1.10 version (seems to me, 64-bit), which can be downloaded from apple.com site with just a little extra-search.
By the way, I do have Windows 7 64-bit OS on my PC, and “Apple” warns that one MUST use 64-bit installation in my case…
One must uninstall previously installed 10.5.2 (if there used to be one, of course). In such a case, please, also uninstall a “Bonjour” program by “Apple” (don’t know what’s that, but you will not be able proceed any further with, as it was said in my case, higher version of “Bonjour” left behind).
After uninstalling those two abovementioned things, I have installed iTunes 10.4.1.10 , even without being asked for reboot by the end of the installation. But, alas, when I tried running iTunes, it failed with the complain about a “iTunes Library.itl” file (found in C:\Users\<My_User>\Music\iTunes). I’ve just renamed the file (could’ve been removed as well, of course) and restarted the iTunes. This time everything went smooth.
The rest of the story, I assume, you can imagine much better than me. Go to Edit->Preferences and tick “Ringtones”. After connecting the iPhone (well, probably one more iTunes restart will be required in this case, - not sure about that), we will get the “Ringtones” tab set also under the iPhone definition (see “DEVICES” in iTunes).
Next, create an .m4a file out of your favorite ringtone, move it to the Desktop, change the extension to a4r, add it back (drug-and-drop) to “Ringtones” tab at the iTunes LIBRARY. Then make some blessing, take a deep breath and… that’s pretty much done. One important thing not to forget before sync: click on your phone (under iTune’s DEVICES), and click on “Ringtones”, located right under the gorgeous :-) apple picture in the top middle of the iTunes window. Mark “Sync Ringtones” and “All Ringtones” (?) there, of course…
BTW, no need whatsoever to register your phone, - you can just postpone the registration...
Phew… Let’s hope I haven’t forget anything. Anyhow, the idea was to get rid of iTunes 10.5.2 as soon as possible, uninstall it together with “Bonjour” (say good bye to “Bonjour”  ), then install a good old iTunes 10.4.1.10, get over few problems and… The rest of the procedure - you know it by heart, by far better than me…
I’ve been struggling with the problem for less than a day (thanks to all of you, pals), but I can imagine there are still some poor pal chaps around…
Let us help them… Very unfortunately, English is not my mother tongue, as you can see… I wish, it would be different, but G-d decided other way… Please, (1) make some corrections and clarifications to this notes (I could've made it better, but in a crunch now, really), and also, (2) try spreading it among as many guys as possible… If you can pass this solution to “Apple” tech support, - it should be taken to consideration...
And I'll be waiting now for a generous job offer from that great company... :-)
Let me just wish you all a very Happy New Year...
Thank you all, dear friends, and do enjoy the best of your own FREE ringtones……
P.S.: iTunes 10.4.1 (64-bit) can be found here http://support.apple.com/kb/DL1427 , at the bottom of the page...
Message was edited by: leonidr321

HT4060 tried everything and can't get my ipad to charge...how do you reset it if battery is complety dead?

tried everything and can't get my ipad to charge. How do you reset IPad when battery is completly dead? charger and cable works fine on IPhone.

First make sure you are using the charger that came with your iPad and plug that into a known good wall outlet. Let your iPad remain on the charger for at least an hour. It may take that long before it responds if the battery is completely dead. If using the charger that came with your iPad there are several reasons it may fail to charge.
Bad outlet. Make sure the Utsler has power.
Bad charger. Try a different charger.
Bad cable. Try a different cable.
Dirt in the connector. Check and clean if necessary.
Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Are my MP3 File Duplicate and can I delete the duplicates

I have just bought an iPOd and started to use iTunes. I went to FILE and ADD FOLDER which then copied all my MP3's into the My Music/iTunes Folder which iTunes created. Now the question is are these files copied accross to the new iTunes location and if so can I delete them from the original location to save disk space etc (there is over 30GB of MP3's).
Also, as the iTunes folder has been craeted on my Prmary Drive (C:\My Documents\My Music.....) is it possible to move all these fules to me second hard drive which is where I store my music, video's etc and ifd so how do I tell iTunes and iPod that is where they are and that is where the synchronisation needs to be.
Sorry if these are simple questions but I am new to this and the Help file in my iTunes does not work hence I am stubbling around in the dark so to speak.
Intel Windows XP Pro It's getting old now

"Now the question is are these files copied accross to the new iTunes location and if so can I delete them from the original location to save disk space etc"
If you had "Copy files to iTunes music folder when adding to library" checked in Edit>Preferences>Advanced>General when you created your iTunes library then you can delete the originals from the folder you added them from.
"as the iTunes folder has been craeted on my Prmary Drive (C:\My Documents\My Music.....) is it possible to move all these fules to me second hard drive which is where I store my music, video's etc and ifd so how do I tell iTunes and iPod that is where they are and that is where the synchronisation needs to be."
Yes it is, see this guide: Moving your iTunes Music Folder

Just installed OS X updates and can no longer boot into Bootcamp

Just installed the latest updates for OS X Yosemite and now I can't boot to my Bootcamp partition. It doesn't show up in Startup Disks and it's not an option when booting while holding Option. The partition still shows up in Disk Utility but it no longer says BOOTCAMP, it now says disk04s. Is this fixable? I just wrote some data to that partition last night that I really don't want to lose and it hasn't yet been backed up. Thank you.
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         91.0 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         20.0 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *90.0 GB    disk1
                                 Logical Volume on disk0s2
                                 2CC4DC13-C5C7-47E8-B005-3B8080275E8E
                                 Unencrypted
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 177734368      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
178144008    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
179413544   18503128
197916672   39059456      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
236976128       2015
236978143         32         Sec GPT table
236978175          1         Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 177734368] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [ 178144008 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 197916672 -   39059456] Win95 FAT32L

Here is a table to validate your values.
GPT 3 Start
GPT 3 Size
GPT 3 End
NTFS Start
Sector Offset
NTFS Size
NTFS End
Sector Offset (MB)
178144008
1269536
179413544
179415040
1496
57561081
236976121
1
Leave your Testdisk display and start a new Terminal Window.
If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
Rebuild GPT4 using start/end offsets
Sudo gdisk /dev/rdisk0
P (print the full list of parts)
D (delete)
4 (part 4)
N (new part)
4   (part 4)
179415040- Start offset in bytes (start point for Bootcamp part)
+57561081- (Size offset as opposed to End offset)
0700     (Windows part type)
P           (print list of all parts just to see what changes will be made)
W         (Write the new GPT)
Y           (Yes! really write the new GPT)
This will delete and re-write the GPT partition info for /dev/disk0s4.
Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR. Use defaults for other questions (like partition codes). The only values that need modifications are the Boot flags and step 6. Accept all other defaults that Gdisk offers.
Sudo gdisk /dev/disk0
P (Print list of parts)
R   (Recover)
H (chooses Hybrid)
Partitions numbers to be hybridized: 2 3 4
Y (Good for GRUB question)
N (part 2 boot flag)
N (part 3 boot flag)
Y (part 4 boot flag make NTFS bootable partition)
W (Write the new MBR)
Y    (Yes! write the new MBR)
Reboot
Here is a sample Q&A from The GPT Fdisk. Notice the highlighted Press Enter/Return.
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): Y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): Press Enter/Return
Set the bootable flag? (Y/N): N
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): Press Enter/Return
Set the bootable flag? (Y/N): N
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): Press Enter/Return
Set the bootable flag? (Y/N): Y
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
Test 4 - If Test 3 is successful, select Bootcamp and Click Restart.

My computer was stolen along with my ipod, just got a new computer and I would like to get my purchase itune stuff how do I do that.

how can I get my itune stuff back my computer was stolen and I want to replace what i lost.

iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

How do I export a song at an mp3 file? And how do i get it to play in stere

How do I export a song at an mp3 file? And how do i get it to play in stereo mode?

Go to the "Bounce Dialog Window".
See pg. 205 of the LE 7 Reference Manual.

I just split my channels and then I drag one into a duplicated file and it is then is corrupted. Why?

I just split my channels and then I drag one into a duplicated file and it open
up corrupted. Why? !

This is a known issue and should be fixed in 5.1.

I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

Currently, Adobe Reader for Android does not provide an option to disable auto-save.
In the Reader home screen (where your files are displayed), you can make a copy of the original PDF document, open the copy (instead of opening the original document), make changes to the copy. Once you email the copy, you can delete it.
For more information, please see Help > How To... > Copy, edit, delete, manage.
Although it is not the most convenient way to accomplish the task, that's the only feasible workaround that is available in Adobe Reader for Android right now.

Profile File Invalid" and can't upload to Youtube form Elements v.4- ????

Problem with Adobe Premiere elements v.4 running on vista. When I try to upload directly to youtube I get a message" ! Profile File Invalid" and can't upload. I have to save the file to PC then upload. Can you help?

As Steve points out, YouTube made major changes to their accounts and the handling of those, when they partnered with Google, about the time that PrE 7 was in full-swing. It is likely that they have made more changes, so even PrE 8's direct upload might now be obsolete.
Now, PrPro has some great (for the moment) YouTube Presets for Export, it does not have that direct link for uploading, that PrE does. Still, either program should be able to do the Export/Share to a YouTube-compliant file, that can be manually uploaded.
Just be aware that YouTube changes their specs. very often, and that they will also re-encode anything that you upload. I always recommend that a user check the published specs. for files on a monthly basis, just to see if YouTube has made a major change, that might affect the specs. of the files that they want - at that moment in time.
YouTube is a "moving target," in many ways. They are so dynamic, because they are still defining that niche on the Internet.
Good luck,
Hunt

I just purchased a new iMac, and can't get into my Wordpress blog. The username and password work on my old Macbook, iPhone4, etc, and all my other password-restricted sites are accessible...just not Wordpress. Ideas? New to all this...

I just purchased a new iMac, and can't get into my Wordpress blog. The username and password work on my old Macbook, iPhone4, etc, and all my other password-restricted sites are accessible...just not Wordpress. Ideas? New to all this...Thanks! JP

Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file

I changed companies and had icloud with my old company - now i want to just use my personal id and can't change any icloud info to match my personal ipad id - i can't delete the icloud without the old company id and password which is not available to me

i changed companies and had icloud with my old company - now i want to just use my personal id and can't change any icloud info to match my personal ipad id - i can't delete the icloud without the old company id and password which is not available to me - it probably doesn't even exist anymore!
Because I can't delete the icloud account, I keep getting view terms to accept and it wants to go to the old company account. I can't do anything to get rid of this - when I try to delete the icloud it wants me to delete find my ipad and asks for the old co. id and password - it's a vicious circle and i just want to get rid of it and start fresh with my regular personal email id and password!!! Help!

You will need that old Apple ID and password, which does indeed still exist. Apple doesn't delete Apple IDs, though if this ID was in the control of your company they may have changed the password. If so, you will need your former company to log into the iCloud account using that ID and password and erase the iPad or remove it from iCloud:
http://support.apple.com/kb/TS4515?viewlocale=en_US
Until that's done you cannot change those settings, and if you try to restore the iPad will have it locked with Activation Lock and thereafter be unusable.
Regars.

Forgot password on my apple I phone and just got a new one and can not remeber my verizon email password, how do I retrieve it

forgot password on my apple I phone and just got a new one and can not remeber my verizon email password, how do I retrieve it

hibob99,
Thank you so much for reaching out to us. I know there are to many passwords out there now days to keep track of them all. Are you looking to reset the Verizon.net e-mail address? If so, you would need to reach out to Verizon Communication by calling 800-837-4966. Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

My iPhone was stolen. I just got a new one and am trying to backup my contacts and data from iCloud. How do you do that?

my iPhone was stolen. I just got a new one and am trying to backup my contacts and data from iCloud. How do you do that?

If your backup is in iCloud, and your new iPhone is already set up, go to Settings>General>Reset, tap Erase All Content and Settings, then go throught the setup screens on the iPhone and when given the option, choose Restore from iCloud Backup and follow the prompts. (If it isn't set up yet, just choose this option when setting it up.)
Be sure your iPhone it connected to wifi and your charger while it is restoring the backup.

HT1347 I just bougt Mp3 files lectures and can't drag/drop into my i Tune playlist. How do you do that?

Similar Messages

Maybe you are looking for