HT1349 can anyone help me find the itunes i downloaded on my netbook

Hi can anyone help me find my itunes download on my netbook. thanks

Have you looked for debris in your headphone jack?

Similar Messages

  • I have bought 12 songs from iTunes on my I phone and would now like to record them on a CD.  When I open my Itunes on my desktop and go to what I've purchased it shows only 7 songs bought????  Can anyone help me find the other's so I can burn a CD?

    I have an IPhone 4 and downloaded 12 songs from the Itunes store on my phone.  I want to burn a CD but when I go into my ITunes on my desktop which is Windows XP there are only 7 listed not the 12 I bought.  Can anyone help me find the others?????

    Connect iPhone, then go to iTunes > File > Transfer purchases...

  • Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

    Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Can anyone help me find the output option in Bridge CC?

    Can anyone help me find the output option in Bridge CC?

    http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html

  • I can't find photos imported from my iPhone 4 with "Image Capture" to iPhoto in my iPhoto anywhere... and they were deleted from the iPhone after import! Can anyone help me find the photos?

    I can't find photos imported from my iPhone 4 with "Image Capture" to iPhoto anywhere... and they were deleted from the iPhone after import! Can anyone help me find the photos?

    Do you know the date they were taken? Try search on that.
    Regards
    TD

  • Can anyone help me find the free full semester labview course slides that were on the labview web site but recently disappeared. I would like to use them in my course.

    Can anyone help me find the free full semester labview course slides that were on the labview web site but recently disappeared. I would like to use them in my course.

    The main page of the Academic section can be found here.
    I think the material you are looking for is the courseware.
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • Can anyone help me find the airplay function on my Macbook air (new)

    Can anyone help me find the airplay function on my Macbook air (new)

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    -Griff W.

  • Can anyone help me find the raw converter for Nikon D4/ I have Aperture 3.0 with Snow Leopard. thanks in advance

    hi,
    Having problems finding the correct download for a Nikon D4 raw converter.
    Can anyone help direct me to the right link?
    I am using Aperture 3.0 with Snow leopard.
    thanks in advance
    Mark

    Nikon D4 is supported by Digital Camera RAW Compatibility Update 3.10:
    http://support.apple.com/kb/DL1510
    Check the System requirements, if it is compitability with your installation Mac OS X 10.6.8.
    Regards
    Léonie

  • [Q] can anyone help me find the "sync all cores" function?

    Hi all,
    i'm new in the world of overclocking and trying to find my way through the bios of my z87 mpower max motherboard... but i've spend some time now trying to find the "sync all cores" toggle?
    can anyone help me out?
    greetings!
    EDIT: my bios version is 1.3

    Look in the UEFI/BIOS 'OC" Section, sub section 'CPU Features'. The Core Ratios to be set individually to the desired multi. Example, cores 1 - 4 set at 40X. Then make sure Turbo Boost is 'Enabled', and to ensure stabilization across the cores, enable 'Enhanced Turbo' setting as well.

  • Can anyone help me find the 'internet' radio heading in version 11.4?

    Using 11.4 for the first time and i'm a bit lost. Love the internet radio station. Where might they be?  Thank you.

    Hi there Liv2Swng,
    It sounds like you are trying to locate the internet broadcasts in the new version of iTunes. Here is an article that can explain to you how to find these:
    iTunes 11 for Mac: Listen to Internet broadcasts
    http://support.apple.com/kb/PH12132
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Can anyone help me finding the exact logic?

    I have a query to find the greater salary distinctly. But I am not able to understand the inner logic of it.
    I suspect that it is using some position value as the reference. So please help me in finding the hidden logic.
    I would appreciate more, if you can explain in detail.
    select sal from emp e where 2 =(select count(distinct(sal)) from emp where emp.sal>=e.sal)
    Cheers,
    Venugopal Saride.

    this example migth be of some help.
    SQL> select empno, ename, job, sal
      2    from emp;
         EMPNO ENAME      JOB              SAL
          7566 JONES      MANAGER         2975
          7902 FORD       ANALYST         3000
          7839 KING       PRESIDENT       5000
          7698 BLAKE      MANAGER         2850
          7782 CLARK      MANAGER         2450
          7369 SMITH      CLERK            800
          7499 ALLEN      SALESMAN        1600
          7521 WARD       SALESMAN        1250
          7654 MARTIN     SALESMAN        1250
          7788 SCOTT      ANALYST         3000
          7844 TURNER     SALESMAN        1500
          7876 ADAMS      CLERK           1100
          7900 JAMES      CLERK            950
          7934 MILLER     CLERK           1300
    14 rows selected.
    SQL> select e2.empno,
      2         e2.ename,
      3         e2.job,
      4         e2.sal,
      5         e2.rn
      6    from (select e1.empno, e1.ename, e1.job, e1.sal,
      7                 row_number() over (order by e1.sal desc) rn
      8            from emp e1) e2;
         EMPNO ENAME      JOB              SAL         RN
          7839 KING       PRESIDENT       5000          1
          7902 FORD       ANALYST         3000          2
          7788 SCOTT      ANALYST         3000          3
          7566 JONES      MANAGER         2975          4
          7698 BLAKE      MANAGER         2850          5
          7782 CLARK      MANAGER         2450          6
          7499 ALLEN      SALESMAN        1600          7
          7844 TURNER     SALESMAN        1500          8
          7934 MILLER     CLERK           1300          9
          7521 WARD       SALESMAN        1250         10
          7654 MARTIN     SALESMAN        1250         11
          7876 ADAMS      CLERK           1100         12
          7900 JAMES      CLERK            950         13
          7369 SMITH      CLERK            800         14
    14 rows selected.
    SQL>

  • My apple 5 s was stolen, can anyone help me find the using of the phone or iccid now

    Equipment models: the IPHONE 5 s 16 gb SILVER
    Serial number: C3*****RC5
    Can help me?
    <Personal Information Edited by Host>

    Apple does not track phones.
    If you did not activate find my iPhone, the device can not be tracked.

  • Console Logs??? Can anyone HELP me find the cause of a kernel panic?

    Hi Folks,
    Beginning last week, my MacPro has started greeting me in the morning with a kernel panic on the screen when I turn on the monitor first thing. At some point in the night or early morning hours it is panicking. My only option is holding down the power button and shutting down. I'd say this was true for 3 or 4 out of 5 mornings last week.
    Is there a way to trace this event in the Console? Where would I find it and what might I be looking for?
    Thanks for the help,
    J.E. Flynn

    Okay... Wow, I really feel like a newb.
    I cannot see anything in any of the listings (or within the nested lists) that specifically says "panic log". Is there a reason I am not seeing this??
    What I do see in the sidebar under DIAGNOSTIC INFORMATION > System Diagnostic Reports > is something called "Kernel2010-02-12-090136Jes-MacPro.panic".
    I don't see anything resembling a "easily-human-readable line" but here's most of the top of the log:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Interval Since Last Panic Report: 43201 sec
    Panics Since Last Report: 1
    Anonymous UUID: BD8C2476-675A-490A-924F-4B0978652EEE
    Fri Feb 12 09:01:34 2010
    panic(cpu 3 caller 0x2a7ac2): Kernel trap at 0x01102145, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000a3, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0xffffffff, EBX: 0x17408640, ECX: 0x01500000, EDX: 0x2b57e160
    CR2: 0x000000a3, EBP: 0x8e7ab4e8, ESI: 0x17408664, EDI: 0x17690000
    EFL: 0x00010206, EIP: 0x01102145, CS: 0x00000008, DS: 0x2bed0010
    Error code: 0x00000000
    Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
    0x8e7ab2d8 : 0x21b2bd (0x5cf868 0x8e7ab30c 0x223719 0x0)
    0x8e7ab328 : 0x2a7ac2 (0x591c30 0x1102145 0xe 0x591dfa)
    0x8e7ab408 : 0x29d968 (0x8e7ab420 0x16f36440 0x8e7ab4e8 0x1102145)
    0x8e7ab418 : 0x1102145 (0xe 0x48 0x10 0x16f30010)
    0x8e7ab4e8 : 0x532fd4 (0x17690000 0x0 0x2bedf000 0x4fd03a)
    0x8e7ab508 : 0x5355ba (0x17690000 0x0 0x2bedf000 0x17408640)
    0x8e7ab548 : 0x5377ab (0x2bedf000 0x17408640 0x1 0x2b57f100)
    0x8e7ab5f8 : 0x538382 (0x2bedf000 0x29d37200 0x0 0xffffffff)
    0x8e7ab648 : 0x539615 (0x2bedf000 0x2 0x1 0x4feae9)
    0x8e7ab688 : 0x5389ed (0x2bedf000 0x2 0x1 0x2b582900)
    0x8e7ab6c8 : 0x976819 (0x2bedf000 0x2 0x8e7ab718 0x2bedf000)
    0x8e7ab708 : 0x96abda (0x2bedf000 0x2bc8da00 0x8e7ab748 0x534f17)
    0x8e7ab748 : 0x961272 (0x2bedf000 0x2bc8da00 0x0 0x0)
    0x8e7ab788 : 0x96244a (0x2bc8da00 0x1e207f 0x1 0x4fcc12)
    0x8e7ab7f8 : 0x962fa5 (0x2bc8da00 0x17762240 0x1 0x0)
    0x8e7ab848 : 0x539bbc (0x2bc8da00 0x2bc87500 0x1 0x4fd03a)
    0x8e7ab8a8 : 0x537df1 (0x2bc87500 0x2bc8da00 0x2ae5a580 0x2b588280)
    0x8e7ab958 : 0x538382 (0x2bc87500 0x239ec980 0x0 0xffffffff)
    0x8e7ab9a8 : 0x539615 (0x2bc87500 0x0 0x8e7ab9d8 0x16f36860)
    0x8e7ab9e8 : 0x5389ed (0x2bc87500 0x0 0x8e7aba18 0x85ffb8)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    jp.plentycom.driver.SteerMouse(3.9)@0x10ff000->0x1106fff
    dependency: com.apple.iokit.IOUSBFamily(3.8.5)@0x924000
    dependency: com.apple.iokit.IOUSBHIDDriver(3.8.4)@0x98e000
    dependency: com.apple.iokit.IOHIDFamily(1.6.1)@0x953000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x913000
    com.apple.iokit.IOHIDFamily(1.6.1)@0x953000->0x98dfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10C540
    Kernel version:
    Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
    System model name: MacPro2,1 (Mac-F4208DA9)
    System uptime in nanoseconds: 80136672443705
    unloaded kexts:
    com.Logitech.Control Center.HID Driver 2.6.0 (addr 0x8efbf000, size 0x155648) - last unloaded 80078546978788
    loaded kexts:
    com.Logitech.Control Center.HID Driver 2.6.0 - last loaded 80136466678962
    com.vmware.kext.vmnet 3.0.0
    com.vmware.kext.vmioplug 3.0.0
    com.vmware.kext.vmci 3.0.0
    com.vmware.kext.vmx86 3.0.0
    jp.plentycom.driver.SteerMouse 3.9
    com.apple.filesystems.udf 2.1
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    There's more if you need it...
    Thanks for the help.
    J.E. Flynn

  • Can anyone help me find the owner of a lost iPod?

    I found an iPod on the streets of manhattan, and have the serial number and the person's name. Apple says to contact the police, but I'm sure that will just be swallowed in bureaucracy.

    my goal is to get it back to the owner. The police have major crimes to solve, this won't go anywhere at the police station, especially in NYC. I might as well throw it in the trash. I don't see why Apple won't help. This is a no brainer. they have the person's contact info, they can be notified through Apple. Not cooperating makes Apple look like an evil corporation that wants you buy another one to make money, which I know it is not. Helping would be good PR

  • Can anyone help me find the solution - JFrame problem?

    HI,
    I have developed an application using JFrames; instantiating a new frame to display each new screen of the application
    as the user moves from screen to screen and back. However when I move from screen1 to screen2 then back to screen1
    and back to screen2, when I attempt to go back to screen1 again screen 2 remains visible eventhough I setVisible(false)
    and issue this.dispose() command. On the first transition from screen 1 to screen2 then back everything seems fine but
    the problem occurs on the second transition from screen1 to screen 2 then back - screen 2 stays visible.
    What is the best way to move from screen to screen to eliminate any unwanted objects?
    this is the code used
    Screen1
    private void screen1_JButton_MouseClicked(java.awt.event.MouseEvent mouseEvent) {
    if (ivjforward_JButton.isEnabled()) {
    ivjforward_JButton.setCursor(Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
    nextscreen();
    ivjforward_JButton.setCursor(Cursor.getDefaultCursor());
    return;
    public void nextscreen() {
    try {
    screen2 ascreen2 = new screen2(parm1, parm2, parm3, this);
    this.setVisible(false);
    } catch (Exception e) { WsnTracer.trace("screen1 "+e.toString());}
    Screen2
    private void back_JButton_MouseClicked(java.awt.event.MouseEvent mouseEvent) {
    ivjBack_JButton.setCursor(Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
    this.setVisible(false);
    newScreen1.setVisible(true);
    ivjBack_JButton.setCursor(Cursor.getDefaultCursor());
    this.dispose();
    return;
    newScreen1 = parmScreen1 in the screen2 constructor. I initially got rid of a similar problem by ensuring that all methods were private. The public forward method in one screen was not being used but had the same name when I changed all forward button methods to private the multiple screens disappeared. I'm not having the same luck with the back button method. Please help

    Hi
    I had a similar problem in that when I used the dispose() method it seemed that the object was not totally released and thus stayed visible because the garbage collection is not something that you must rely on.
    So I did just the following each time I wanted to close a JFrame
    if (myJFrame != null)
         myJFrame.dispose();
         myJFrame = null;
    }I hope this helps you.
    Ciao

Maybe you are looking for

  • Downloading pdf files in Safari

    Lately I'm having trouble downloading pdf files that are open in the Safari window. I'm using the latest versions of Safari Adobe Reader on an IMac OSX 10.6.8. I used to download them simply with "command s", now it says "the document ... cannot be e

  • Dual Monitor remote login

    Hello, I use a Windows 7 Enterprise PC at work with dual monitors, I work from home on a regular basis and I use a Macbook Pro with Mountain Lion. I need to know if there is a way to remote login and use a dual monitor as well, when I have 2 monitors

  • Accessing a SQL-based Corporate Phone Directory

    I would like to be able to access a corporate phone directory that is kept in a SQL database using the Directories/Corporate Directory button. This would be used instead of the CM Directory only for phone number lookups. Two questions: 1) is this fea

  • OutOfMemoryError cannot be caught

    There's a bug open on this (ID 4697804) but I thought I'd advertise it more widely because I've only just discovered it (at the worst possible time) and it's taken me completely by surprise; I'm stuck now as to what I'm meant to do. The issue is that

  • Quicktime doesn't play

    QuickTime won't play