HT1349 My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Similar Messages

  • My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    If your MBP is under warranty, bring it to an Apple store and have the technicians fix it.  If not, try the steps in this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • HT1349 I have registered with my local library and can download books.  But these are not being shown in ITunes, the Library does not show 'audiobooks'.  I have an ipod 6G.  can anyone help please?

    I have recently purchased (from the States) an ipod nano 6th generation.  I belong to a local library and can download books from the audiobooks online section.  Problem is, my iPod when synced to iTunes, does not show Library as a category and audiobooks.  For some reason, it is allowing me to download the books to my iPod, but I am unable to delete them from the iPod, and also, it is giving an echo (I think somehow it is downloading twice which is giving an echo effect).  Not sure what is going on, but if anyone can advise me on this I would be very grateful.

    Hello mrsbonniesue
    If you have an issue with the audiobook showing up in music, check to see if those tracks are labeled as audio books or music. The article below will explained as well as I have highlighted the main portion for changing that information.
    iTunes 11 for Windows: Edit song and CD information
    http://support.apple.com/kb/PH12360
    Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook
    Regards,
    -Norm G.

  • Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    I have same problem.
    However, I am unable to turn on Assistive Touch.
    At one time I was able to activate it, but it went away and now I cant reactivate.
    What is the solution?

  • TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

    When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

    I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work.  i can't find an automatic update of time zones on my itouch to turn this off.

  • I found my old ipod and i forgot the passcode. It doesnt have an home button so i dont know how to put it in recovery mode so i can restore it. Ive been using the assisted touch method. But what should i do to put it in recovery mode

    i found my old ipod and i forgot the passcode. It doesnt have an home button so i dont know how to put it in recovery mode so i can restore it. Ive been using the assisted touch method. But what should i do to put it in recovery mode so i can restore it.

    Use this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Hey Ian
    That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Thank you for using the Apple Support Community.
    -Norm G.

  • Btinternet has changed since 21st Nov and it no longer works on the ipad. Can anyone help please?

    Can anyone help please, btinternet have changed their servers on e mail since 21st Nov and I can no longer send or receive e mails. BT say set to the following but I cannot get it to work, any suggestions please.
    Go to your iPhone/iPad home screen and tap Settings.
    Scroll down to Mail, Contacts, Calendars.
    Tap Add Account.
    Scroll down and tap Other.
    Tap Add Mail Account.
    Put the name you want people to see when they get mail from you in the Name field.
    Enter your BT Business username in the Address field. For example, [email protected] or, where you have registered a custom domain, [email protected]
    Enter your BT Business password in the Password field.
    In the Description field enter the name you want to use to identify the account.
    Tap Next. If you get an error message at this point, tap OK.
    Make sure that POP is selected at the top of the screen.
    In the Incoming Mail Server section, change the Host Name to pop.outlook.com.
    Scroll down to the Outgoing Mail Server section and change the Host Name to smtp.outlook.com.
    Tap Save.

    Hello Kitty Galore,
    It sounds like your your photos that you take on your phone are not showing in your iPad Photo Stream.
    I would check both devices to make sure that they both have Photo Stream turned on in the iCloud settings.
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/HT4486
    How do I turn on My Photo Stream?
    After your devices are up-to-date and you have set up your iCloud account, it’s easy to turn on My Photo Stream on any of your devices:
    iOS devices: Go to Settings > iCloud > Photos (Photo Stream in iOS 6), then turn on My Photo Stream.
    Mac: Go to System Preferences > iCloud, then select the checkbox for Photo Stream. Click the Options button and verify that the My Photo Stream checkbox is selected. Open the application you want to use with Photo Stream (iPhoto or Aperture) and confirm that My Photo Stream is turned on in that application. You can also adjust your my Photo Stream settings in iPhoto or Aperture Preferences.
    If it is enabled, then I would check to make sure Automatic Upload is enabled with this article:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    I imported photos to iPhoto or Aperture from my camera, but I do not see them uploaded to the My Photo Stream album, though the service is enabled.
    In iPhoto or Aperture, navigate to Preferences > Photo Stream. Ensure that Automatic Upload is enabled under My Photo Stream and that you have an active Wi-Fi or Ethernet connection.
    If Automatic Upload is not enabled, you can either enable it and import again, or manually add the newly imported photos to My Photo Stream in iPhoto or Aperture by dragging them into the My Photo Stream album in your Library.
    Cheers,
    Sterling

  • My itouch screen is frozen, wont slide to unlock. have done what adviced with buttons...can anyone help please?

    my itouch scrren is frozen, it wont slide to unlock..i have done all that was adviced with the buttons but that didnt work..can anyone help please?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • I have an iphone 4 and and it suddenly turns off i stilled had 70 percent to so i went home plugged it into the charger and let it sit there for about 30 mins still nothing then i put tried putting it in dfu mode but nothing please help

    i have an iphone 4 and and it suddenly turns off i stilled had 70 percent to so i went home plugged it into the charger and let it sit there for about 30 mins still nothing then i put tried putting it in dfu mode but nothing please help

    Connect iPhone to Wall Charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons. If nothing, this means your iPhone has a hardware fault, most likely and hopefully battery.

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My iMac goes to disc utilities on startup, repair disk doesn't cure it and I can't reinstall Mountain Lion because I don't remember my I'd and password at the time I bought the software. Currently working abroad and at a loss can anyone help please?

    My iMac goes to disc utilities on startup, repair disk doesn't cure it and I can't reinstall Mountain Lion because I don't remember my ID and password at the time I bought the software the system isn't accepting my current details and Apple isn't recognising the answers to my security questions.  They don't even seem to have my correc date of birth so I can't progress the reinstallation.  I'm currently abroad and have my iMac with me but with no way of contacting Apple that I can find, I'm at a loss and very reluctant to pay £35 to try and get my ID and pasword sorted out given that their system recognises my current details.  can anyone help please?
    AG

    when they gifted me the mountain Lion software several years ago.
    Mountain Lion was introduced in July 2012. Did the people who gifted you possibly use their Apple ID for the purchase of your OS? If you used your own Apple ID, you should have simply used the one you use for all things app store. The problem with any purchase at the app store is: whatever Apple ID was used to purchase, it willl stay tied to that Apple ID forever. And, purchases from the app store are not transferable.
    So, you can check with the person(s) who gifted you or spend $20 to buy it - or, if your hardware is compatible with the new OS Mavericks, you could download it and associate it with your Apple ID.
    FWIW, according to the licensing agreement, the OS remains the property of Apple and you are only granted a license to run it.

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

    I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
    Geoff

    I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
    I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

  • Just got a used iPhone 4, loaded SIM card for straight talk. Everything works except the iTunes and apps. Can anyone help me?

    Just got a used iPhone 4, loaded SIM card for straight talk. Everything works except the iTunes and apps. Can anyone help me?

    Very vague.
    In what way do itunes and apps not work?
    Please explain

Maybe you are looking for

  • IE6, load times & pngs

    true or false: using pngs (specifically png-8's WITHOUT alpha transparency, but with gif-style 1-bit transparency) adds load time to a page versus a comparable transparent gif of the same file size. I have been told this is causing some latency and i

  • How to develop a query in BI Publisher Report

    Hi Experts, I am new to BI Publisher. Could somebody help me how to prepare a query. Thanks.

  • Invoking Derived Class Method

    Hi pls go through the below code, can any one give me solution how to access the Derived class method in this Point. Note: In the below code , only in runtime we will come to know which Derived class method is going to invoke(So in runtime we will ge

  • Vrml browsers that work with sun java in windows

    Hi, i was wondering if anyone knew any good vrml browsers that worked with sun java in microsoft windows, I tried cortona but that only used microsoft's jvm which was discontinued and i wanted to avoid. I am currently trying to use cosmo player but a

  • CFSELECT and BIND

    Hi I'm trying out cfselect with bind for the 1st time and I'm having 1 issue... I am trying to populate the 2nd cfselect with the zone_names AFTER i have selected the country_name in the 1st cfselect. the 2nd cfselect isnt populating! My database loo