HT1363 after pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do

The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.

Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel

Similar Messages

  • Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

    Has anyone had this issue. I created my song from itunes to garage band, took my iphotos to create a slide show and when I burned to idvd there are several pauses during playback?

    Hi
    SlideShow in iDVD has a 99 photo limit - more than this and all sorts of error occures.
    One can have more than one SlideShow on a DVD = X times 99 photos.
    or assemble SlideShows in a movie editor (no limit at least not under 650 photos)
    (only limit is Time in iDVD (movie time + MENU time --- 60 min or 120 min on SL-DVD and about twice on DL.-DVD )
    I use
    • iMovie up to HD6 - or -
    • FinalCut any version
    As they will give a better quality than iMovie'08 or 09 or 11 can do.
    Yours Bengt W

  • TS1503 iTunes keeps telling me I don't have enough space to sync the songs and it clearly says 3 GB free and yet it won't sync. Has anyone had this issue ever? Before a week ago I could fit 900 songs and now I can't fit 300.

    Okay guys iTunes keeps telling me I don't have enough space to sync the songs and I know that is BS because it clearly says 3 GB free and yet it won't sync. Has anyone had this issue ever? Before a week ago I could fit 900 songs and now I can't fit 300. I know that my phone could fit 800-900 songs and there aren't many apps. There has to be a glitch. Can someone help? Please send me a response if you truly know the answer.
    Rob
    <Email Edited By Host>

    know that is BS because it clearly says 3 GB
    Didn't know an iPhone is capable of "BS"! Impressive.  Do the basic troubleshooting steps described in the User Guide:  Restart, Reset, Restore.
    Never post your email address or any personal info in a public forum like this. Any answers you get will be found here.

  • Has anyone had this issue? There is a fine white powder (no coke jokes) covering anything plastic in my apartment. It's coming from my iMac, I discovered yesterday. For 6 months this mysterious powder has been in my abode, probably in my lungs, too.

    Has anyone had this issue? There is a strange fine white powder covering anything plastic in my apartment. It's coming from my iMac. It's a year and a half old (out of warranty). After 6 months of trying to figure this out, I found out yesterday when my local Apple Sore offered to fix it for $700. I want to know how toxic this powder is, since I've been breathing it for 6 months. A carcinogen I'll bet.

    If an Apple employee (repair tech) doesn't know what it is.............
    Suggest that you do a Google search for the "guts" of your model/generation iMac.  See what the "guts" are made of and post back your findings. 
    We are just ordinary users like yourself that help out here.  I for one, would be very interested to know if your iMac has a "monkey on it's back."
    Sorry, I couldn't resist.

  • I can't connect to iTunes. I think it might be and issue with McAfee Security Center. Has anyone had this problem? If so, how did you fix it?

    I can't connect to iTunes. I think it might be an issue with McAfee Security Center - not sure. I am getting an error code of -42408. (Don't know what that means...) Has anyone had this problem? If so, how did you fix it?

    Having the same issue after downloading the lastest version of itunes. Apple is going to lose me as a customer, if this keeps up with their software updates. They never seem to work.
    Really, they should want me to be able to access their store. That's money out of their pocket. 
    Honestly, I don't know why Apple doesn't have a techie monitering their support threads trying to help fix issues.
    I don't have McAffee, so that wouldn't be my issue. I guess, I'll keep checking back to see if anyone has figured anything out.
    I can't seem to sync my ipad, now either. Ebay is sounding really good.

  • I'm not able to message everyone from my iPad has anyone had this issue

    I'm unable to message everyone from my iPad. Has anyone had this issue?

    Unable to message everyone meaning that you cannot use messages at all? Certain contacts? Some details would really help.
    iOS: Troubleshooting Messages - Support - Apple
    iOS: Troubleshooting FaceTime and iMessage activation

  • My 4th generation iPad will not charge; has anyone had this issue?

    My 4th generation iPad will not charge; has anyone had this issue?

    Yes a number of people have had this issue in the past, alas you are not the first.
    You should test with another cable or in another outlet to make sure its neither of those, if not probably take into an apple store.

  • My LG Lucid was dead yesterday and wouldnt charge. This morning the icons on the bottom of phone are blinking. Has anyone had this issue?

    On Monday night the phone was fully charged. I shut it down when going to bed but did not plug in charger. Tues morning the phone would not turn back on and would not charge with any charger or outlet. I kept it plugged in overnight tuesday.... Wednesday morning I tried to turn it on and the icons on the bottom of the phone blink but phone doesnt turn on. What's going on here? i've had the phone less than two months!!

    The blinking icons mean, the battery is too low to allow the device to power up. That seems to suggest to me your cable is OK, and so is the adapter (and outlet).
    OK, I think the thing to try now is a replacement battery.
    It might be that your battery just failed. Since your device is so new, you might want to go into a local store and ask if they can replace the battery, or get something off eBay or Amazon.
    If you go to a Verizon Store to ask to have a new battery (more preferrable) have them verify operation in the store before you leave with the cable and adapter you have, but with the new battery. With a really depleated battery, that might take 10 or 20 minutes.
    If another battery doesn't work, then it's probably the phone, and you'll need to have it serviced or replaced under warranty.

  • Has anyone had this issue with CUPS-PDF after update to Yosemite?

    It states the PDF is getting made but have looked and no file ever gets created. The printer Queue shows a file but it always pauses the queue and even after resume it does not create a PDF file

    Hi, I have this issue too.
    It looks like a sandbox issue : In the system log, I can read, just after trying to print something, with no file created (cups-pdf is intended to create a PDF file) :
    23/10/2014 18:30:20,797 sandboxd[13941]: ([15034]) sh(15034) deny file-read-data /
    23/10/2014 18:30:22,400 sandboxd[13941]: ([15034]) pstopdf(15034) deny file-write-create /private/tmp/PSNormalizer.9AjHkb
    (Full reports below)
    I tried to uninstall and re-install several times, changed configuration (where to create the PDF files), chmod 777 folders and executables, reseted PRAM and SMC… no effect. Did not made the permission check yet.
    Full report for the first line is :
    sh(15034) deny file-read-data /
    Process:         sh [15034]
    Path:            /bin/sh
    Load Address:    0x108af4000
    Identifier:      sh
    Version:         ??? (???)
    Code Type:       x86_64 (Native)
    Parent Process:  cups-pdf [15033]
    Date/Time:       2014-10-23 18:30:20.103 +0200
    OS Version:      Mac OS X 10.10 (14A389)
    Report Version:  8
    Thread 0:
    0   libsystem_kernel.dylib         0x00007fff9239800e __open_nocancel + 10
    1   libsystem_c.dylib             0x00007fff8bd25076 __private_getcwd + 139
    2   sh                             0x0000000108b02897
    3   sh                             0x0000000108b3e99c
    4   sh                             0x0000000108b3dcf0
    5   sh                             0x0000000108af5782
    6   libdyld.dylib                 0x00007fff972ae5c9 start + 1
    Binary Images:
           0x108af4000 -        0x108b79fff  sh (94.1.2) <4763ef88-b313-3c6e-af1d-e1dd23d0fa55> /bin/sh
        0x7fff8bcfb000 -     0x7fff8bd87fff  libsystem_c.dylib (1044.1.2) <c185e862-7424-3210-b528-6b822577a4b8> /usr/lib/system/libsystem_c.dylib
        0x7fff92382000 -     0x7fff9239ffff  libsystem_kernel.dylib (2782.1.97) <93e0e0a9-75b6-3904-bb4e-4bc7c05f4b6b> /usr/lib/system/libsystem_kernel.dylib
        0x7fff972ab000 -     0x7fff972aeff7  libdyld.dylib (353.2.1) <19faf435-c165-3374-9def-d7bba7d61db6> /usr/lib/system/libdyld.dylib
    And for the second line :
    pstopdf(15034) deny file-write-create /private/tmp/PSNormalizer.9AjHkb
    Process:         pstopdf [15034]
    Path:            /usr/bin/pstopdf
    Load Address:    0x1067c8000
    Identifier:      pstopdf
    Version:         ??? (???)
    Code Type:       x86_64 (Native)
    Parent Process:  cups-pdf [15033]
    Date/Time:       2014-10-23 18:30:20.969 +0200
    OS Version:      Mac OS X 10.10 (14A389)
    Report Version:  8
    Thread 0:
    0   libsystem_kernel.dylib         0x00007fff9239937e mkdir + 10
    1   libsystem_c.dylib             0x00007fff8bd3acd3 mkdtemp + 27
    2   PSNormalizer                   0x00000001067d5f13 doNormalizeWithMutex + 1356
    3   PSNormalizer                   0x00000001067d6d14 normalize + 203
    4   PSNormalizer                   0x00000001067d6c2e PSNormalizeFromFile + 94
    5   pstopdf                       0x00000001067c984e
    6   libdyld.dylib                 0x00007fff972ae5c9 start + 1
    Thread 1:
    0   libsystem_kernel.dylib         0x00007fff9239922e kevent64 + 10
    1   libdispatch.dylib             0x00007fff8cf11a6a _dispatch_mgr_init + 0
    Thread 2:
    0   libsystem_kernel.dylib         0x00007fff92398946 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x00007fff8f5414a1 start_wqthread + 13
    Thread 3:
    0   libsystem_kernel.dylib         0x00007fff92398946 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x00007fff8f5414a1 start_wqthread + 13
    Binary Images:
           0x1067c8000 -        0x1067c9fff  pstopdf (13) <2b2b83ec-30d9-34b3-b789-47097101630f> /usr/bin/pstopdf
           0x1067d4000 -        0x1067d7fff  com.apple.normalizer.privateframework (10.0 - 13) <d1667dfe-f272-3840-b747-82897f1ed590> /System/Library/PrivateFrameworks/PSNormalizer.framework/Versions/A/PSNormalize r
        0x7fff8bcfb000 -     0x7fff8bd87fff  libsystem_c.dylib (1044.1.2) <c185e862-7424-3210-b528-6b822577a4b8> /usr/lib/system/libsystem_c.dylib
        0x7fff8cf0d000 -     0x7fff8cf37ff7  libdispatch.dylib (442.1.4) <502cf32b-669b-3709-8862-08188225e4f0> /usr/lib/system/libdispatch.dylib
        0x7fff8f540000 -     0x7fff8f549fff  libsystem_pthread.dylib (105.1.4) <26b1897f-0cd3-30f3-b55a-37cb45062d73> /usr/lib/system/libsystem_pthread.dylib
        0x7fff92382000 -     0x7fff9239ffff  libsystem_kernel.dylib (2782.1.97) <93e0e0a9-75b6-3904-bb4e-4bc7c05f4b6b> /usr/lib/system/libsystem_kernel.dylib
        0x7fff972ab000 -     0x7fff972aeff7  libdyld.dylib (353.2.1) <19faf435-c165-3374-9def-d7bba7d61db6> /usr/lib/system/libdyld.dylib

  • Has anyone had this issue with adobe extension manager cc? Video included

    Enclosed is a link to a video that will show my problem with extension manager
    http://www.youtube.com/watch?v=eo6FdbxkMb0
    System info:
    Windows 8
    8gb ram
    Nvidia Geforce GTX 560 Ti
    AMD Phenom 9500 Qudcore
    Adobe Creative Cloud Software
    Thanks,
    elfish43

    Hi,
    I downloaded the latest panel for Adobe CC, but whwn I try and install it I get msg saying the file does not have a valid signiture.

  • Has anyone had this issue????

    My mother's Gusto will make calls and receive calls. However, there is no sound during the calls. When I checked the volume, the "earpiece" volume pops onscreen but she has never used an earpiece. Is there a magical way to fix this problem? Thanks for any help offered

    Are you trying to adjust the volume during the call? I know that's how my old flip phone worked to adjust the call volume during the call. It might be labeled earpiece volume because it is referring to the speaker that is placed next to the user's ear.

  • Has anyone had an issue with FindText not scrolling in Acrobat X?

    I wrote some code for Acrobat 8 using C# that used AcroAVDoc 's FindText method to search for a particular phrase so that I may find the page the text it was on and its location on the page so that I can insert an image at that location.  This worked great, the FindText method returned true when it found the text, scrolled to the page it was on and selected  the text.  In Acrobat X, I can not reproduce this.  It finds the text but does not scroll or select.
    Has anyone had this issue?  If so, how did you resolve it?
    Below is the code snippet that worked in Acrobat 8:
      try
                    Acrobat.CAcroApp app = new AcroApp();
                    Acrobat.CAcroAVDoc doc = new AcroAVDoc();
                    object jso;
                    app.Show();
                    //Open  For Searching
                    if (doc.Open(PdfDocument, ""))
                        Thread.Sleep(AcrobatDelay); //WaitForAcrobatToLoad
                        bool found = doc.FindText(SearchTerm, 0, 0, 0);
                        if (found)
                            CAcroAVPageView pv = doc.GetAVPageView();
                            int PageNum = pv.GetPageNum();
                            CAcroPDDoc pdDoc = (CAcroPDDoc)doc.GetPDDoc();
                            jso = pdDoc.GetJSObject();
    Thanks in advance for any help.

    Hi,
    I just found these work arounds.
    https://discussions.apple.com/thread/5490015?tstart=0
    The first is appropriate if you want to send as an undlisclosed resicpient. The second method shows all addresses.

  • I have a problem with HP laserJet P2055dn... Has anyone resolved this issue??

    I have a problem with HP laserJet P2055dn...
    Since I changed OX to Mavericks, my macpro does not connect to the HP printer (laserJet P2055dn)
    Has anyone had this issue? Anyone resolved this??

    How do you force the printer driver to reinsall?
    I delete the printer and re-added, but nothing changes.
    All the forums topics concerning driver updates reference the App Store, but I cannot find anything there.
    Nor I can download the driver from the vendor website, as it also redirects me to the App Store, where nothing happens.
    I am new to Mac, so the question may be a silly one.
    Thank you for your help.

  • When I try download new os 5.1.0 on my iPhone 4 I get this error message  "stopped (err = -3259)" after it has downloaded.  Has anyone had this problem and if so what is the fix.

    When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download.  I have tried 3 times, it takes about 8 min. to download the 790.7 MB file.  Has anyone had this problem and what is the fix?

    See "error -3259" here.

  • When I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

    when I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

    Hi Terence, When I am uploading photos from a memory card,not all of the photos show up on I photo as a photo image, but show up as a dotted square line. For example, I just added 12 photo from two days. The first day had 5 photos, but only 4 show up as images, then there is 1 as dotted  a square. The next day, there 7 images, with only 4 showing up as photos, and three as the dotted squares.
    I am using I photo 11, 9.1.1.
    Thank you

Maybe you are looking for