HT1369 I have an Alpine car stereo with USB port for my iPod, most recently an error message apperared. Now I am having a problem connecting to iTunes via my computer, with windows 7. The screen on my iPod still shows the Alpine logo and "Ok to Disconne

Please help. My iPod froze up after playing in Alpine car stereo. The screen shows the "Alpine" logo and the message "ok to disconnect" I have tried to connect to my PC with little success. Windows 7 does not recognize the iPod with the error message "device error". I have run the iTunes Diagnostics but it still does not recognize device as "connected"

See my reply to "Transferring Tunes" . Suggestion: From what you said, it sounds like you could easily connect this iPod to a Windows computer. Go back to the computer where you have the 3600 songs. Get the files out of the folder where they reside and put them on the iPod as data (your iPod has to be set up for disc use. So you will then have your music on there as the iTunes music AND the data files. Take that iPod to your Mac. Drag those files from the Finder, where you will see them on your iPod, which will mount like an external disc. (It was set up for disc use). Drag those files to your iTunes Library in the Source List (on the left) in iTunes. You might have to drag them into some interim folder on your harddrive first, like the Music folder within your User.
eMac iPod2G iPodPhoto3G Shuffle Mac OS X (10.4.5) MacPlus,SE30,PB520,PB5300,iMacSE 10.3.9,PBG4 10.3.9

Similar Messages

I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

im not shure but if you get an 3.5 mm sterio headphone jack and plug that in your car and shuffle it should work just as good

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture. Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

Homestly haven't a clue what's going on there.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

I have an iPod Touch version 4.2.1, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. What can I do to fix this problem?

I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?

Try:
iOS: If you can't back up or restore from a backup in iTunes

After updating got error 4005. Now all I am getting is connect to itunes screen. Won't let me do anything.

after updating got error 4005. Now all I am getting is connect to itunes screen. Won't let me do anything with phone

Have you jailbroken either of these devices? Have you used the computer you are trying to update with to jailbreak a device? Have you tried using another computer to do the update? You may have to make an appointment at the Genius Bar to have the device checked, or send the device off to Apple care.

I downloaded new version of itunes. Then itunes asked if i wanted the latest version for ipod. itunes said it was getting ipod ready for download, then there was an error message. Now ipod is locked up with a apple on the screen and a line under it

I downloaded the latest version of itunes. Then itunes asked if i wanted the latest version on ipod. Itunes was getting ipod ready then a error happened. Now ipod is locked up with a apple on screen with a download line under it. Also itunes will not recognize ipod like it has before. If anyone can help it would be appreciated. Thanks

Do a hard reset, put it in DFU Mode and do a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My iPad has the iTunes logo and USB cable on the screen. Can I still back up my music and photos?

My iPad has the Itunes logo and USB cable on screen. Can I still back up my files?

If you haven't already done so, its unlikely.
You can try holding both the home and power buttons at the same time until the apple logo appears on the screen, then let go.

Helpppp My Ipod Will not connect to itunes via my computer, but when i plug it into my laptop it connects but doesnt have all my songs on the itunes library. How can i add songs to my ipod via my laptop

??

Nothing should be lost.
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
NOTE:
The 2nd Gen iPod Touch can only go to 4.2.1

Just purchased anew ipod touch cant connect to i tunes error message "could not sign in therewas a problem connecting to the server"

just purchased a new ipod touch when i tried to activate it and access itunes iget an error message "could not sign in there was a problem connecting to the server" anyone else have this problem? thx

figured it out needed to use my password for my wireless router so the ipod could access my wifi.

My Ipad dropped off the sofa and now I cannot get the screen to appear - it sometimes shows up bright yellow and green. What can I do to reset? or whatever?

I cannot get the screen to appear - can see if it's on or off. There are times when the screen is bright bright green and yellow then disappears. Can I reset it? if so how?

It will cost you approximately US$219.00 to US$299.00 depending on the model.
Apple will replace the entire iPad; they don't repair.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad

Problem connecting k300i mobile phone to computer with dcu-11 cable, driver needed?

Wanting to get the photos and such off my old mobile onto my computer, I bought a dcu-11 usb data cable to connect said Sonry Ericsson k300i mobile phone and do so. However, I've had no luck in getting the connection recognized. The cable fits and everything, but when I put it in no drivers are found (installing the software on the disc provided apparently didn't work in the first place) and under device manager (I have Windows 7 by the way if that makes a difference to everything) it just shows the cable as "unspecified" and is just named "usb cable dcu-11". The automatic search for drivers didn't work either.
After much googling, there seemed to be a solution here http://www.expansys.com/ft.aspx?k=60242 however, the Sony Ericsson page that was linked no longer exists it seems, so I'm stuck as to what to do now.
I assume it's just that I need the correct driver, I have the Sony Ericsson PC Suite but that also says no phone is connected. I'd appreciate any help with this I can get.
Thanks in advance.

Sorry for delay replying - bereavement.
I don't have a USB option in Connectivity, it focuses on internet connectivity. I have an infrared option but my PC does not support infrared.
I scoured the internet for a data cable for this particular mobile, it was very hard to come by, managed to get one, it is working, but without the software for this particular mobile I don't think I'm ever going to get these photos off :/

I am having a problem connecting to iTunes store. Every time want to download an app, it says cannot connect to iTunes store. Have no idea why?

Hi, I am having trouble accessing the iTunes store to download apps. Every time I want to download an app it says cannot connect to iTunes store. I have no idea why. I've reset my settings and it still doesn't work. Any help is much appreciated. Thanks

Start here and see if any of these steps help.
Cannot connect to the iTunes Store
Try this first.
Try resetting (turning off and then on again) your Wi-Fi router

I need a cable like the one that came with the iphone5-- to connect in my car-- my car has a USB port for my music?? Thank you!!

II'M a little confused on which cable I need for my car? I have the iphone5 and want to play my music in my car! Can someone please tell me which one to order??
Thanks!!
Mary

That would be this one.
http://store.apple.com/us/product/MD818ZM/A/lightning-to-usb-cable?fnode=45

I can't connect to itunes via my computer - the error I am receiving is: Itunes cannot connect to the store. The network connection was refused. I am on the internet and I know that is working. Please help.

I can't connec to itunes but my internet is working fine

SO we rule out Winsock provider issue.
Can you try these entries in command prompt (Run as Administrator for Win7/Vista) one at a time?
ipconfig /release
then
ipconfig /renew
restart computer
ipconfig /flushdns
totally shut down computer then restart.
netsh winsock reset all
restart computer
Now test your iTunes again. If that does not work, uninstall your Antivirus program and test again.

Hello. i have a ipod touch 4, and i am putting in the correct passwotd but it is saying im not, now its saying to connect to itunes on my computer but itunes will not work. what do i do?

hello.
i have a ipod touch 4 and i have being putting in the correct password for it but it keeps saying it's wrong. now it is telling me to connect to itunes but itunes does not work on my computer.
i need this problem fixed ASAP because i use my ipod for my uni studys..
thank you alice walsh.

Place it in recovery mode by:
Placing your device into recovery mode
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes

HT1369 I have an Alpine car stereo with USB port for my iPod, most recently an error message apperared. Now I am having a problem connecting to iTunes via my computer, with windows 7. The screen on my iPod still shows the Alpine logo and "Ok to Disconne

Similar Messages

Maybe you are looking for