HT1386 All of a sudden only about a 4th of my content will sync onto my ipod. I've tried restoring the settings, updating itunes, and installing on another computer. Now i only have about a 4th of the music I had on there before and there's still plenty o
All of a sudden my ipod erased everything when syncing. (this seems to occur most frequently after adding music to my library). At first I thought it was the ipod and exchanged for a new one ( i"d had the first one for a year and a half until this happened. After recieving the new ipod i still have the same problem. I've restored the factory settings and everything is up to date and yet I've only been able to sync around 9000 songs tops compared to the 40,000 I had before. I even tried syncing from a different computer and still only some of the music syncs. Besides a few newbies here and there all the content is the same as what I had before. Any suggestions?
I´ve tried every possible solution listed, those that have worked for others...nothing has worked. My library has about 2777 songs of which at first only 1370 loaded. After syncing w/o music, which deleted all music from my iPhone, I then selected Sync Music again and synced...well this time only 391 songs were added!!! It skipped the other 1400 I already had in! I´ve come to notice that these 391 songs are the ones purchased directly on the iTunes Store, but previously I had ALL my CD´s ripped and loaded to my iPhone.
I don´t know if this has something to do with the new iTunes version, but please, please, someone give me some light! I don´t want to go and convert all 2400 songs from MP3 to AAC..!! It´s not practical!
Thanks in advance for your comments.
Mario
Similar Messages
-
My iTunes has about 3000 tracks but not all of it will sync onto my iPod
i recently purchased an 80GB iPod shuffle which can also play videos and movies. i bought it recently, but i'm haveing a hard time getting used to iTunes and all this apple, mac business.
i have windows XP professional, i made sure i put all the music i had on my pc and put it onto my iTunes library, now i have a lot more music to put onto my ipod from cds etc but i can't even get all my music from my itunes to download onto my iPod first!
they're all in mp3 format, and when i go to "sync music" instead of syncing all of my 3000 tracks its only syncing like 1700 or so!
also, if i already have music on my ipod, but i just want to add say an extra one or two songs onto my ipod, i tried just adding those tracks, but then all my older songs already on the ipod god deleted!
does that mean i have to download all my music from the itunes ALL OVER AGAIN?
if so, i don't think i like this ipod / itunes business, i may even have to return it. this is just ridiculous, i never had this problem with my smaller mp3 players. the whole reason i bought the iPod was because it can store alot of music, 80gb and it only cost me around £140. its new, not second hand or anything.
help!Hello, and Welcome to Apple Discussions,
first of all, I don't think you have a shuffle, as they come up to 4 GB.
Syncing is a concept that some users have a hard time adjusting to - it means synchronizing the content of the iPod to your PC.
When you tell iPod to sync only two songs, it does exactly that; you may want to set up playlists in iTunes that contain what you want on your iPod and sync those automatically.
Another option would be to Manually Manage your iPod, in which case you can just drag and drop songs on it like you would with any other MP3 Player, however, you lose the convenience of syncing.
Hope this solves your problem, cheers. -
I attempted to update my iphone 4 from the settings on my phone to the iOS6 operating system. After doing this and the download appeared to be complete, my screen showed the itunes hook up. I hooked up to itunes, it said that my phone needed to be restored. After trying to restore it, itunes says an an error occured and my phone could not be retored. Now itunes won't recognize my phone! My screen now shows the iphone circle, but it isn't moving. I have hit the power and home button and it doesn't seem to work. What now??
Power and home button for at least 10 sec.
-
Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers. -
Why does my compiled exe ask for the location of subvis when installed on another computer?
Hello,
I have a piece of deployable software I have developed and so I have created two build specifications to produce an .exe file and an installer.
The build specification for the installer includes the compiled exe and all of the required SubVIs to reside in a sub directory in the install directory and when it installs on another computer the SubVIs are located in the correct place.
However, when I install and run it on another computer, a dialog box appears prompting for the location of the SubVIs, I select the one that it is asking for and it then loads the remaining VIs and runs as normal.
Is there something fundamentally I'm missing in the way SubVIs are called after using an installer, or is there a way to bundle them into the .exe/installer so that I don't receive the dialog box?
Many thanks in advance,
Sam
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets
Solved!
Go to Solution.Yes - but on my computer, I believe the exe is finding the files from the .exe build, rather than the installer location.
In fact, I just renamed the default build directory (where it places the installer / exe after the build and I get the same dialog - it is looking in C:\LabVIEW Builds\etc.
rather than...
C:\Program Files\My Software\subvidirectory
So maybe it is the problem you suggested Yamaeda? If so - is there a solution/workaround for this?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
The recent update is "stuck" installing for many hours now, why?
Recently did the update for my MacBook and it seems to be stuck on installing software? It has now been 12 plus hours. Any ideas?
I would power off and boot into the Recovery Partition (RP). From there, open Disk Utility and run Repair Disk. You could then exit RP and try a normal start, to see what happens and what build you are in,( in About this Mac).
If the computer will not start, go back to the RP and download a re-install of the OS.
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US -
Hi, I just recently burned one of my personal CD's onto my itunes so I could sync it to my ipod touch. After the CD was done burning, I dragged the music over to the ipod so it could sync, but nothing happened. I have tried several times and even with other music and none of my music will sync onto my ipod. Can somebody please help me with this?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method -
can i save the full program to a disk or flash drive and install on a computer that doesn't have internet access
My apologies. I'm not sure what happened to my link. It should go to Adobe - Adobe Acrobat Reader Distribution
-
My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My iPod shuffle only syncs music that was purchased from the iTunes store. Most of my music has been copied off of CD's and none of that music will sync to my iPod. Please help!
Sorry for the typos, I hope my message still gets across!
-
how do i deactivate the auto updation on my iphone 4,i want to use only watsapp but when i am turning on my celleular data all apps starts updating theirself,please help me.I am not using any internet pack other than watsapp.
iPhone do not do automatic update. You have to manually trigger the updates.
If your Settings > iTunes & App Stores > Automatic Downloads > Music, Apps, Books are ON then when you purchase any new content/item with any devices/computer iTunes, it will automatically download. Switch it OFF if you do not want that to happen. -
I purchased a 16gb ipod touch 1 gen and it wont restore or show the battery chaging icon. It shows the symbol of usb cable and what appears to be an itunes symbol without the itunes words being displayed. Upon trying to restore I have gotten error codes 1603 & 1604. I referred to the apple website for assistance and followed the steps to the letter with no results. So what else should I try or could I try because I have has no such luch thus far? I have held the home button and power button I tried to enter DFU mode but unsuccessful due to the screen boots with apple logo then immediately goes to the itunes screen and no further only when connected. Will not power on without usb connection have charged battery to see if it was the issue and no battery bar locator displays with or without being connected to PC.
So you did all this:
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1603
Did you try the last paragraph too? -
Burned CDs will not sync to my ipod. I just replaced my computer with a different computer, unauathorizeed all previous computers, authorized the one i am now using, but only purchase content will transfer to my ipod.
Hi ballen13!
I have an article here for you that may be able to address your question and provide some insight into this issue:
Some songs in iTunes won't copy to iPod
http://support.apple.com/kb/TS1420
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I have an external server that stores all my movies and music, is there a way to stream it to my apple tv?
If not is there a way I can link the folders to itunes (without downloading files to computer) that will make them view-able for the apple TV?
If none of that works is there a way to get it working alternativly?
Additional Information:
Everything is linked via ethernet cable.
I'm using a PC to set it up.
If you have any other questions feel free to ask and I'll help where I can.
Thank you for any help(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.
-
I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application. I know that I am not using the cd burner for anything else. I have restarted the Mac and nothing. Any ideas?
One other thread said it was fixed by waiting till prompted by iTunes to insert the blank disk, instead of putting it in first. Does that work? Found a number of hits on this Googling.
Maybe you are looking for
-
Exchange rate is different between records in OB08 and records in document.
Hi Gurus, The exchange rate is different between records in OB08 and records in calculated amount in line item. How does it happen? Not all of the documents in the same period has this problem. For example, a document A created by FB05 on Jun 30 2010
-
How to use sub sequences as sources
Hi I want to take a section from a sequence, and use it for source material later on for a recap. I mark an in/out on the sequence, hit 'make subclip' then load it in the viewer monitor. When I splice it into the sequence, it is not made up of it's o
-
Using Control Reference to change subVI control - sub VI also called using a container
Hello I am in need to update a control inside a sub VI that is also called inside a container in the main VI. Please see the project attached. My goal is simple - Change the "Main VI calling sub VI-Container.vi " panel's "FGV state" once the state ch
-
Anybody has successfully getting the RFC.exception in a synchronous call via BPM? What i mean, is to get the RFC.exception then use it inside BPM. I have already searched the forum, and i think nobody have done it before. Any clue guys??? Thank you v
-
Hi, i have a toshiba satellite A305 6872 laptop, and for the past few days the touch media buttons have stopped working ( they don't even glow now ). So can anyone help me fix this ?> Thanks.