HT1386 It says to click the device button in the upper right corner....there isn't one. Itunes doesn't even recognize my devices since I did the most current update. I have two iPhones, thru different carriers, and neither one works now!
I did the latest iTunes update...I have 2 iPhones--each thru a different provider. Now, I can't sync to download any music from iTunes. iTunes doesn't recognize either device now. I went thru diagnostics, didn't work. I tried the suggestions from Apple...it says to click the device button in upper right corner....there isn't one. When I connected each for the first time after update, it "installed device drivers". I have checked for further updates on iTunes--nothing. I made sure there were no updates listed for iPhones...all up to date. I get an error code and from what I have looked through in forums etc, it seems like a lot of people are getting it...0ex000084 I believe it was. Windows opens to download photos but that's it. Devices are not listed at all. I have tried all 3 USB ports in computer too. I have never had any problems before this update!! HELP! I just bought $15 worth of music I can't download to phones now!
On the left hand side of iTunes do you have the sidebar up left hand side?
If this is not up then try this, with iTunes open press "Control" and "s" together and it should bring it up. From the sidebar it should show an option devices with the iPhones underneath it.
Similar Messages
-
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
What are Apple doing to rectify the problem that the Wifi icon is greyed out and you can no longer get onto Wifi!!
This has happened on both iPhones I my household!!
It must be a problem with Apple as so many people seem to having the same problem.
I have tried resetting networks, resetting phone etc....nothing worksBroaden your perspective a bit. There are literally millions of phones out in the world without any issues at all. If you are reading posts on the internet about the ones with issues, then you would be left with the impression that they all have issues. Neither you nor I have data to support the existence of a widespread issue of this type.
Having said that, the only issue that matters is the one at hand; yours. Let's stay focused on that. Help is here and if we can't counsel you toward a software solution, then help will be available elsewhere, but at some cost to you. -
I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others. -
I have two iphones with different phone numbers that I use. I have one of them set up on icloud now, but do not know how to set up my second device on icloud. Both of my iphones use my same Apple ID for purchases, etc. Is there a simple way to add a device to my icloud account? Thank you in advance for any help someone may be able to give me.
To move one of the phones to a different iCloud account (if that's what you want to do), go to Settings>iCloud and turn all synced data to Off. When prompted, choose to keep the data on your iPhone. After everything is off, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud so the other phone will not be effected. Then set up a new iCloud account with a different Apple ID and turn iCloud syncing in Settings>iCloud back to On. When prompted, choose Merge. This will upload the data to the new iCloud account.
You will then have to go to icloud.com and sign into each iCloud account separately and delete any unwanted data that you don't want on the phone syncing with each account. -
I have two iMacs in different rooms and Safari started crashing immediately after opening on both machines. latest version is installed.Any ideas?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I have an iphone 4 softbank carrier and would like to know if you have to unlock to use any carrier
I have an iphone 4 softbank carrier and would like to know if you have to unlock to use any carrier
Softbank does NOT offer unlocking. You cannot ever use that phone on another network. You will need to purchase a different phone if you wish to use another carrier.
-
Unable to update latest version of iphone thru wi-fi and itunes, solutions?
unable to update latest version of iphone thru wi-fi and itunes, solutions
Is your iTunes version updated, if not then update it from here ?
What error do you get when trying to update your iPhone ? -
My Ipod will not turn on. I held down the power and home button for several seconds, and the apple sign shows up. Itunes doesn't even recognize my Ipod. HELP!!!!
How do I restore my Ipod when Itunes doesn't even recognize it???
I don't care even if I loose all my songs and apps, I just want me Ipod to work again!!!
PLEASE HELP!!!! THANKS IN ADVANCEI ended up on this link, which related to my problem:
http://support.apple.com/kb/ht1808
When I got to step #3 (While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.) my Ipod would not turn on, and Itunes did not recognize my Ipod. :S -
I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!
I'm sorry it's a nano 2gb silver
-
HT202731 the red light appears at upper right corner on my macbook pro display
the red light appears at upper right corner on my macbook pro display
My worked out of the box. But, I found the following that might be helpful to you:
Phone calls in Yosemite actually work through the FaceTime application. As a result, users must ensure they are signed in to their Apple ID for FaceTime calls on both their iPhone and their Mac, and both devices must also be connected to the same Wi-Fi network. -
I can't see the "plus" sign in my upper right corner ind the calendar!?
I can't see the "plus" sign in my upper right corner ind the calendar!?
In my database connection i can`t see the plus sign on the
database tab.
Not quite clear to me what you mean by that. In any case, you
should configure the data source in the Coldfusion Administrator.
Open the CF Admin page,
http://127.0.0.1:8500/CFIDE/administrator/index.cfm
. Go to the
Data Sources section. Create a new datasource, for example,
by entering the following
Data Source Name:
eventplanning
Driver:
Microsoft Access with Unicode
Press the
Add button. Enter the value
Database File:
C:\CFusionMX\wwwroot\cafe_townsend\contact\coldfusion\eventplanning.mdb
Press the
Submit button. Coldfusion will then verify the connection to
the database. Confirm that its status is
OK. If so, the eventplanning datasource is configured for
use in your Coldfusion application. -
We have two Iphone 4s with different accounts, what would we need to do to share music from and Itune card if one of us purchased and the other did not?
Put all of the music on the computer(s) to which you sync, then sync to your idevices
-
We have two iphones, an ipad2 and ipad mini. The iphones have no difficulity discovering the air printers on our network. However the ipads cannot locate air printers. If the ipads are switched off/on they can find the printers but only for a one time use. Then they can no longer find printers. Any suggestions?
You are most welcome
-
ipod nano won't synch, i haven't purchased anything in a long time and haven't synched with the computer just charged on car charger. when i plugged the nano in it tried to install a driver and that failed and now the computer and itunes won't even recognize that the nano is plugged in.
REPOST (this solved my problem!!)
originally posted by shootme78
"The device manager just needed to be prompted to use the driver for an Apple Mobile Device instead. The Apple driver was already in my PC - I just had to prompt the device manager to use it instead of the camera driver it kept installing. Here's what I did:
I right-clicked the iPhone in Device Manager and chose Update Driver (for me, the iPhone was showing up in the Device Manager under Imaging Devices).
I selected "Install from a list or specific location (Advanced)" and clicked Next.
I chose "Don't search. I will choose the driver to install" and clicked Next.
In the next window there were 2 drivers to choose from: the "Digital Still Camera" driver that my PC kept thinking the iPhone was, and Apple Mobile Device USB Driver. I selected the Apple Mobile Device driver.
The driver installed, and at that point iTunes 9.2 could finally detect the iPhone. Yay!"
if you still confused, this is the real post by shootme78
https://discussions.apple.com/message/11761418#11761418?messageID=11761418
this solution worked with every itunes version
* i tried this on itunes 10.6.3.25
Hope this will also solve your problem
Maybe you are looking for
-
I want to print page number with every page how it possible..... So that I would come to know how many printed documents are left.... Please reply soon
-
Hello Guru's I have 2 issues, and i am unable to understand the system logic for the same Issue 1:- We have an Intercomapny scenario sequence of transaction is as follows 1. Create Return purchase order (document type NB) - Intercompany purchase 2. P
-
Unable to connect to Deployment share via the 2012 Update 1 workbench.
Hi Everyone, This is a tricky one, I've been scratching my head for a few days now. I have a MDT deployment share, which lives on a server, for argument sake, lets call it: MDT-01. Via the Servers MDT Workbench, I can connect to the deployment share
-
Photos App Not Displaying Small Images, Is There a Workaround?
I have an iPhoto album of icons (25x25 and 32x32 images) which I use in mock-up applications on my iPad (such as Blueprint and iMockups). The images display fine in iPhoto on the computer but when I sync them to my iPad, the Photos app shows them all
-
Wireless guest access with CWA and ISE using mobility anchor
My team is trying to demo wireless guest access using CWA with an ISE server. We appear to be hitting an issue when combining this with mobility anchoring. When we don't use a mobility anchor the authentication goes off without a hitch seemingly pro