HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my  Ipad  (Settings, General, iTunes Wifi Sinc)  shows  a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
  Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119,  and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated  " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

Similar Messages

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Time Machine cannot back up to G-Drive slim which is connected, but does not appear in Finder.

    my MacBook Air (13-inch, Mid 2013) using OS X  Yosemite10.10.2 has properly connected G-drive Slim, but it does not appear in Finder;
    On Screen pop up Warnings:
    "Back up Failed  Time Machine couldn't back up to "G-Drive Slim" " and
    "Disk Not Ejected Properly  Eject "G-Drive Slim" before turning it off."

    Does the drive show in Disk Utility? Try a restart.

  • √using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

    using sucessfully airport express for internet
    when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
    wanting to use extreme at base and express in another part of the house

    How is the express getting internet? What modem is it plugged into?
    How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
    IPv6 is also needed.. turn on local link.

  • My ipad keeps restarting over and over again and even it does not appear the home screen

    my ipad keeps restarting over and over again and even it does not appear the home screen...............................how can i fix this.................
    `

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • As I can download to my device on google latitude iphone 4s since I live in Venezuela does not appear in the app store of my country. thanks

    as I can download to my device on google latitude iphone 4s since I live in Venezuela does not appear in the app store of my country. thanks

    I think the setting you're looking for is within the iWork apps; for example, Settings>Pages>Use iCloud>On.  Also be sure to set Settings>iCloud>Documents & Data to On.

  • My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

    When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
    The only options offered are "ignore" or "eject"
    Disk Utility sees the disc but does not give a repair option.
    What can I do?

    The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
    If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
    Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
    A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
    The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
    My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
    https://www.google.com/#q=raid+backup+mac
    Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
    Anyway, I am going on and on, yet not really saying anything.
    My ideas would not be all that interesting to follow as a backup
    plan when matching available newer hardware to task, but you
    can get some into better ideas if you are not in a rush. Get a
    good setup and then look into more an betterer stuff.
    Good luck & happy computing!

  • My ipod works in itunes but does not appear in "my computer" after I changed the properties

    My ipod works in itunes but does not appear in "my computer" after I changed the properties.
    First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
    showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
    chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
    no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
    or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
    Any help would be very much appreciated. Thanks.

    Hi,
    To show up in Windows Explorer, you can try placing the iPod into
    disk mode.
    Moreover, i recommend you to
    restore ipod to factory settings.
    If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
    Here is an article you can refer to below:
    http://support.apple.com/kb/TS1369
    To get more help, you can also redirect to apple support forum:
    http://www.apple.com/support/ipod/
    Thanks!
    Andy Altmann
    TechNet Community Support

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • HT201272 I purchased Words with Friends on my iPad. I then purchased an iPhone, however, this app is not showing up under "purchased". How can I download to iPhone without paying for it again?

    I purchased Words with Friends on my iPad. I then purchased an iPhone, however, this app is not showing up under "purchased". How can I download to iPhone without paying for it again?

    Which version did you buy on your iPad ? If you bought the HD version then that is only compatible with the iPad, so you will need to buy the iPhone/Pod version (or download the free version) if you want to use it on your iPhone.

  • TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    not recognized by anything: http://support.apple.com/kb/TS1369
    recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
    solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
    (make sure you go to the next slides.

  • I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign.  How can I fix this problem?

    I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign.  How can I fix this problem?

    Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

  • My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

    my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

    Take a look at this link, http://support.apple.com/kb/TS1538

  • Epson r800 prints, but does not appear in Printer List: can't use Utilities

    My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
    iMac   Mac OS X (10.4.9)  

    For your Epson try this:
    Hard Drive, Library, Printers (folder), Epson folder,
    Inkjetprinter folder, Utilities folder and here you
    will find Epson Printer Utility2. Click on it and it
    should work.
    Note. Epson utilities will not work unless the
    Printer is directly connected to the computer.
    Had the same issue with my 2200 photo and the above
    worked.
    Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

Maybe you are looking for

  • Installer file damaged Windows 7

    Help! Non - Tech hear.   I get the following message when trying to install an adobe app on Windows 7 OS "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I

  • How can I place calls with Facetime?

    I'm trying to use facetime to connect with my family that's spread around the country. I have an iMac and I purchased and downloaded the Mac OS X Snow Leopard update. I then downloaded the Facetime beta for the Mac and installed it on my computer. I

  • MR11- Change account determination

    All- How do we change the account determination that are  set up for MR11 (GR/IR clearing). We want it to post to a manfucatoring account instead of an inventory account when doing this transcation. Transcations/ steps would be great if you know... T

  • Does anybody know if I can substitute the exchange rate in a CO document?

    Dear experts, Does anybody know if I can substitute the exchange rate field in a CO document creation? We have a header substitution in FI to populate the constant 1 in the exchange rate field every time we use a specific currency. And this substitut

  • Aperture Import Extremely Slow

    Hi all, I recently inherited an iPad from my dad, and before I could erase and sync it with my computer I had to get all the photos off. There are about 10 GB worth of photos on the iPad, so I understand why that would go slow. But I checked, and an