HT1386 when i plug in my iphone, it doesnt come up in the options in iTunes, i have already reinstalled iTunes. Help!!

when i plug in my iphone, it doesnt come up in the options in iTunes, i have already reinstalled iTunes. Help!!

Try Here  >  http://support.apple.com/kb/TS1538

Similar Messages

  • When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    Go through this support doc:
    OS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes.

    I have plenty of space on my hard drive (500GB), but when I plug in my iPhone there is a window stating the pone cannot be backed up because of lack of disk space. The same occurs with attempting to import CD's into iTunes. The hard disk was replaced recently in order to gain extra memory. Is there some sort of limit set up from the original hard drive causing this problem?

    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
    Once this process has been completed restart your computer.
    Utilities & info regarding checking your HD space: 
    Where  did  my  Disk  Space  go? 
    Slimming your hard drive
    Seven ways to free up drive space
    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace cost $1 or is a free utility that checks HD space.
    SpaceControl is a free utility that checks HD space.
    Disk Inventory X
    WhatSize
    SpaceControl

  • When i plug up my Iphone 5c too charge it makes the noise that it is connected, 30 seconds go by and it makes the sound again. My phone is completely dead so it won't turn on at all. Whats wrong with it?

    When i plug up my Iphone 5c too charge it makes the noise that it is connected, 30 seconds go by and it makes the sound again. My phone is completely dead so it won't turn on at all. Whats wrong with it?

    Powering Apple and third party peripherals through USB
    Try restarting the Apple Mobile Device Service.
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
    iOS: Device not recognized in iTunes for Windows

  • HT201269 my computer was re-imaged for school and now when i plug in my iphone it doesnt show up on itunes. Any solutions??

    my computer was re-imaged for school and now when i plug in my iphone it doesnt show up on itunes. Any solutions??

    Can you connect a USB memory stick to the school's laptop?

  • HT1386 When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is chargin

    When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is charging.
    Why does this happen? I have tried several cables and it does the same thing.

    Try:
    https://discussions.apple.com/message/15519179#15519179

  • HT1386 When I try to sync my ipod it comes up with a message saying "iTunes was unable to load data class information from Sync Services. Reconnect or try again later". I have reconnected and tried later numerous times! Has anyone else had this problem?

    When I try to sync my iPod touch it comes up with a message saying "iTunes was unable to load data class information from Sync Services. Reconnect or try again later". I have reconnected and tried again later numerous times and it hasn't worked! Has anybody else had this problem and knows how to fix it??? Help me!

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • Itunes when ever i connect my device to sync  comes up with  *applemobiledevicehelper quit unexpectedly* then i have to quit PLEASE HELP!

    itunes applemobiledevicehelper quit unexpectedly)) errror mesage whenever i link my phone up to my account just started happening today really need help as i have no contacts or  music,videos,ect!! i have tryed syncing an old phon also and same message occurs!

    Kyle...
    Help here >  iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X

  • When I plug in my iPhone 5 to iTunes it says that I need to have the 64-bit version, Help?

    So when i plug in my iPhone 5 (all fully up to date etc), my itunes says: "This iPhone cannot be used, because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64bit version of iTunes." Now I have always had the 64bit version and still do, i have removed iTunes and installed this 64bit version that im supposedly missing 4 times now and it is still happening. Please help?

    Hello AliHoward,
    You may need to completely remove iTunes, QuickTime, and other Apple software from your system prior to reinstalling. The following articles (one for Windows XP, the other for Windows Vista/7) detail the removal process. I'll also link you to the latest version of iTunes for Windows (64bit specific installer).
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Cheers,
    Allen

  • HT1386 I don't want to sync my photos.  I can turn off everything else but the photo's and it this is using up all my memory.  How do I shut off photo sync when I plug in my iPhone?

    I don't want to sync my photos.  I can turn off everything else but the photo's and it this is using up all my memory.  How do I shut off photo sync when I plug in my iPhone?

    Open itunes, connect iphone, go to photos tab select what you like, sync

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • I had to re download itunes on my computer and when i plug in my iphone it says im connected to a different itunes library. is there a way to sync my iphone to the new library without erasing the stuff on my phone?

    On my laptop i had itunes but recently i needed to delete everything on my laptop including itunes. When i went to update the music on my iphone i re downloaded itunes but when i plug in my iphone a message pops up saying my phone is connected to another itunes library. When i clicked sync it says that i have an option to erase and re sync my iphone. I dont really care about loosing my music but i dont want to lose all my pictures on my iphone. Is there anything i can do to keep them?

    Syncing shouldn't trouch you photos unless you have photos in a Photo Library album.  These would be photos that were synced to your phone from your computer.  If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
    If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically".  Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
    Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141.  To follow the steps, first open iTunes and go to View>Show Sidebar.  Also, Transfer Purchases is now located in File>Devices.

  • When I plug in my iPhone 5 w/OS 8.1.2 and try to sync. w/iTunes 12.0.1 it crashes.

    When I plug in my iPhone 5 w/OS 8.1.2 and try to sync. w/iTunes 12.0.1 it crashes. Any fixes?

    I noticed this problem, iTunes displayed my iphone, but crashed soon after, with the color spinning wheel.
    I did the following things and it worked for me.
    I downloaded the last version of itunes, remove iTunes.app with CleanApp, and all these files.
    /Library/Frameworks/iTunesLibrary.framework
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Library/MobileDevices.bun dle
    /System/Library/Extensions/AppleMobileDevice.kext
    /System/Library/Extensions/AppleUSBEthernetHost.kext
    /System/Library/PrivateFrameworks/AirTrafficHost.framework
    /System/Library/PrivateFrameworks/CoreFP.framework
    /System/Library/PrivateFrameworks/DeviceLink.framework
    /System/Library/PrivateFrameworks/iTunesAccess.framework
    /System/Library/PrivateFrameworks/MobileDevice.framework
    I restarted, installed iTunes, restarted again and I was able to sync again.

  • HT1766 how do i get the pc to open up the file dialog when i plug in my iphone?  It asked me what to do, and I said to import files and pictures, and now it goes directly to pictures.

    I have a laptop with touch screen and windows 8.  I plugged in my iphone because i wanted to sync my music to itunes.  A box came up and asked what I wanted to do when the phone was detected.  I had 3 choices and do nothing.  I chose import files and pictures.  and now, when i plug it in, it goes right to pictures.  How can i change it so the little file box opens and gives me the option to "import files and pictures?"

    You should install iTunes for Windows and sync your iPhone with it.

  • How can I disable the Photos app from automatically running when I plug in my iPhone?

    How can I disable the Photos app from automatically running when I plug in my iPhone?
    I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
    I just want to NOT have to kill the Photos app every time I plug in my phone.
    Thanks.

    I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted.   But it is another example of the hide-and-seek Apple likes to play with us.
    The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
    I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
    Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
    Have you looked at Capture One?  It looks much more similar to Aperture than Lightroom.

Maybe you are looking for

  • Error in Asset Acquisition Interface

    Hi All, We have an Interface which creates an Improvement asset & acquires it. When we see the asset details in AS03, on the Depreciation areas tab, depreciation key was getting blank. This whole process happens using three jobs in sequence. The last

  • TS1368 Cannot Connect to iTunes Store on iPhone 4 since upgrading to IOS 6

    Have read several threads on this - none of the suggestions have worked.  Losing my patience w/ this update - fixing iTunes Match was a nightmare that required me to restore my phone twice.  Typically I use a feature in Slacker or SiriuxXM where you

  • Elusive Auto-Play Feature for Web Gallery

    I dug around in the forums here and couldn't find a discussion where this question was asked AND actually answered. I can't seem to get the Web galleries that I export from Adobe Bridge to autoplay. I've tried messing with the parameters: 'src', 'res

  • EA1 - SQL DDL Tab not working for 10.2.0.3 Oracle Apps DB

    I just downloaded the EA1 SQL Developer 1.5.0.51.70 for evaluation purposes. I am connecting to various types of databases - all databases are version 10.2.0.3. When I am connected to an Oracle Applications 11i database (10.2.0.3 version) as the apps

  • DNS server provided by VPN to Mountain lion doesn't work

    We are producing proprietary VPN server and client. After upgrade to Mountain lion the DNS stopped working. I noticed that if_index is now in the dns resolver decription when scutil --dns is used for listing. This if_index refers to the physical netw