HT1391 Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one.

Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one. Will they do the same for me? Is there any other way I can get all my pictures from my iPod without iCloud set up? Would Apple be able to lock up my iPod so they cant use it at all? Please help me, thanks (:

ipod touch lover wrote:
Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do?
Nothing... why would they do anything?
Apple does not provide insurance and they are not law enforcement.

Similar Messages

  • HT5007 I had a old iPhone 5 and it broke. I went to the Apple store and they gave me a new one. This new iPhone won't download any music. Can I have help?

    I had a old iPhone 5 and it broke. I went to the Apple story and they gave me a new one. This new iPhone won't download any music. Any help?
    I'd really appriciate it!

    annalisefritz wrote:
    I had a old iPhone 5 and it broke. I went to the Apple story and they gave me a new one. This new iPhone won't download any music.
    A few more details please.
    Did you connect it to your computer?
    Does it show up in iTunes?

  • I returned my iphone and they gave me a new one...

    I returned my iphone and they gave me a new one and they activated it at the iphone store. when i got home and tried to sync my contacts, they were gone. there are a few contacts that it imported but only about 25% of my original list. I think the contacts that it is syncing is from the mac address book. I have had problems with this phone and recently re-installed the sim card and had to restore my contacts and it worked fine. but this time when i plug the iphone in to itunes, it doesnt recognized the phone with "my name" on it. it just says iphone under the devices tab. where are my contacts? are they stored somewhere else on the mac where i can retrieve them?
    Please help!
    thanks
    C
    Message was edited by: coachhomer

    coachhomer,
    With the iPhone, contacts are not stored on the SIM card, but stored on the device itself. Typically, you want to backup your iPhone contacts with a program on your computer (like Address Book or Outlook) so you have those contacts in case you need to restore your iPhone or get it replaced. When you sync your iPhone with your computer, iTunes will make a backup of your information, but future syncs replaces your backup.
    You can look and see if your old backup remains by going into the iTunes preferences and clicking on the syncing tab. It will give you the name of the iPhone backed up and the last date it backed up the information. If you synced your iPhone before you took it in to be replaced, your contact information may still be included in that backup. You can restore your phone in iTunes and choose the backup you want to re-sync to the iPhone.
    Hope this helps,
    Jennifer B.

  • A friend gave me his iPod touch 4th gen to update from 4.2.1 to ios6.0.1 I don't want this iPod associated with my account. Just want to have the latest software for him. What should I do?

    I want to update this iPod without losing all of my friends music and apps. What should I do?

    To update
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
    A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
    Identifying iPod models
    Since you are stuck at 4.2.1 you may have a 2G iPod.
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • How can I get apple to warranty my iPod touch 4th gen? It has always had issues and seems to be a lost cause. Will not connect to wi-fi. It also has cracked screen, but that is not the issue.

    It has a cracked screen also but that is not the issue. I am willing to live with the screen

    Unfortunately, ANY signs of 'neglect or damage' automatically become the cause of any issues you're having. As in it doesn't matter if your screen was flickering before it was dropped, when they see the dent or cracked screen, that screen flicker was caused by the drop. Because they  have no way to know if you are telling the truth (it's nothing personal, they just literally dont' know) so any signs of damage become the reason for your issue. The only way out of that is if you had taken in your iPad and, even if you didn't get it replaced, an apple employee can have documented that yes, that issue existed before the drop.
    It's not fun, I know, but that's just how it is. Any signs of 'neglect or damage' and that 'neglect or damage' is the cause of your issues.

  • I cant reset my iPod Touch 4th Gen because my home button is broken for one, the screen is completely unresponsive like full black and iTunes wont pick it up when connected to my PC

    any other way of resetting? I need all of my data that was on it before.

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • Ipod touch 4th gen won't update says file corrupeted. same when i try to update apps. have tried again many times h

    See my title for my problem

    Here is what it says after it completes the download process and when it tries to install.
    The software for the i pod hoseboy i pod was corrupted during the download.
    Disconnect and reconnect then try again.  Make sure your network settings are correct and your network connection is active or try again later.
    Have done everything it has asked several times.

  • I just traded my iphone at the store and they gave me a new one and i came home to sync it and my computer wont recognize that i plugged in my phone

    i will plug it in and neither itunes nor my computer reconize that its pluged in. this phone is brand new s there is no faults in it.

    What happens when you manually open iTunes?
    Is your iTunes the current version (11.0.4)?

  • TS1363 How do i sync iPod Touch 4th Gen with iTunes and PC?

    Hi Recently my iPod Touch  (4th Gen) is not recognized by iTunes or ' My Computer' on my PC it was synced fine previously. I have tried to get an update via a Wi Fi network but this timed out... How can I get it recognized by cable?
    Many thanks in advance...
    Regards
    Shane.

    - Transfer iTunes purchases to the now new computer by :
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - Make a backup of th iPod by connecting the iPod to the computer. Right click on iPod under Devices in iTunes and select Back Up.
    - Restore the iPod from backup and sync as necessary.

  • I know it's a little late but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play my music. It will play spotify and YouTube music but not my music. Everything else works fine but when I go to play a song it just skips to the next. Why

    I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • A song is listed as being 4:17 seconds but stops after 35 seconds and moves onto the next song, this happens in iTunes and on my iPod Touch 4th gen, both are recently updated to the latest software and the album was purchased today.

    This is bugging me quite a bit, I bought an album today and it lists the song as being 4 mins 17 seconds. However, as I mentioned, on both platforms it stops at around 35 seconds and flicks onto the next song in the case of iTunes or just stops playing audio for my iPod Touch 4th gen. It is a full song on Youtube and everywhere else I seem to look, so is this likely to be a software issue with iTunes/iOS or the song itself perhaps?
    Many thanks to any who can help!

    That suggests the track is damaged.
    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs5, the battery have charge 20 minutes. Even after the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do?

    Hi
    I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs 5, the battery have charge 20 minutes. After the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do? Thanks

    Same thing here. Try putting the brightness down all the way (its hard to see at first but you will get used to it) and one more thing is that close all you open apps. So to do that you have to click the home button twice (after you put your passcode in) and you will see some apps in the bottom. Hold it until there is a red - sign. click all of them so they go away. This does not delete your apps it just makes your ipod better.

  • What will happen to the iPod touch 4th gen when the 6th gen comes out?

    Hi I was just wondering what will happen to my ipod touch 4th gen (app updates, processing speed, price, etc.) when the 6th generation ipod comes out?
    Thanks

    No body knows about the next gen of any Apple products, other than they always advance.  There are still many much older products in successful use so that should not be a problem.  My iPad original cannot use iOS 6.1.3 but it still does what I want and works great.
    If you have the 4th gen, use it aa long as it meets your needs.  If it doesn't look at the options for a new one at that time.

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • I have and ipod touch 4th gen and it will show up on my computer but not on my itunes i need help please and thank you

    I have an ipod touch 4th gen and when I plug it into my computer it shows up but it wont on iTunes and I was trying to put more music on it today and it wasn't showing up can u help please and thank you.

    Hey Babetta94,
    Thanks for using Apple Support Communities.
    After reviewing your post, the iPod is not recognized in iTunes. A frustrating situation to be sure. You haven't mentioned what OS the computer you are using uses. You can choose what article to use either OS X or Windows from this quoted section.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    If you have an iPod touch:
    For Windows: See iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    For Mac OS X: See iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Have a nice day,
    Mario

Maybe you are looking for

  • How to add and hide more fields in PPM?

    Hello, Im new to this tool and I would like to know how to add and/or hide customized fields. I've only know that Its somewhere under SPRO > Global Enhancements to Project Elements but Im a little bit lost there. Can somebody explain to me with detai

  • HOw to find out a report name when you know only the name of background job

    Hi experts , my question is i need to find out teh report name for which i knew only the background job name of the report . thanx Venky.

  • Problem in creation table for sap 4.6

    hello evrybody i have just a problem in creating table with se11;after saving and activite those table and zhen i select icon  of contents it bloocks and shoz this  error message : Error reading table TMCNV; RC = 4 Message no. BMG 135 thank you for y

  • Can I use canon eos40d for stop motion capture in premiere elements 9?

    I Want too do stop motion capture but when I click get media, the pop up dialog box proceeda as if to import still photos. How do I get the "capture panel" that is talked about where I can select stop motion?  Is premiere elements 9 supposed to work

  • SLD setup for UDF to RFC Call in XI

    Hello, I am trying to create a UDF that has an RFC Call to the XI backend and I have it working in my development system.  But for some reason I cannot create the Business Service > Communication Channel > GeneratedReceiverChannel_RFC in my Assurance