HT1414 Can anybody help me my iphone is not starting it only shows apple logo and is not going any further i have tried to hard reset it but it still doesnot starts.Will anybody tell me How To start it...

Can anybody help me my iphone 4 is not Satrting it only shows the apple logo on start screen and is not going any further I have tried resetting it but it is still not starting.....Will anybody tell me whats the Problem....

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

Similar Messages

IPhone 5c just showing Apple logo and won't go any further

Tried swithching it off but will not respond and actually power up

Plug into your iTunes and do a restore.
Use iTunes to restore your iOS device to factory settings - Apple Support
PJRS

My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..

My wife's iphone will not turn on. I have tried the normal resetting procedures but nothing. Any ideas would be much appreciated..

iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?

I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

IPOD Touch only shows apple logo and computer will not recognize IPOD in iTunes or on my Mac. Cannot restore.

My IPOD Touch 3G is frozen on the apple logo. It will allow me to reset it. The computer no longer will recognize it. I have tried on several Macs and it seems as though the problem is with the IPOD and not the computer since none of my MACs will recognize it.

You can try to put it on Recovery mode then restore it..
Press or Hold the power and home keys 10 seconds.
Screen goes black, now release the power button
Make sure you do not release the Home key until
your iTunes says "We have detected an itouch
in recovery mode."
After this its simple all you
got to do is a simple restore using your iTunes

HT1476 my iPhone is only 3 months old and will not charge unless it is turned off and when i try to hook it up to iTunes it says it is an "unrecognizable device" and it will not work!! I have tried the hard reset a hunderd times and that dosen't work eith

please help me!

Clean iPhone charging port with a clean dry toothbrush. Try different good USB Cable. If still problem, all iPhone 4S have full Warranty, make Genius appointment and take iPhone to Apple for resolution of problem.

My ipod touch 4G will only show apple logo, and can't be turned on and off?

It eventually runs out of battery but that doesn't change anything. All i can do is hold down the power and home screen button simultaneosly for a while. After this it flashes white then black then back to logo. Anyone know what to do? I plug it into my computer and it doesn't show up or anything. Any suggestions? my itouch hasen't had problems before or anything.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Can anybody tell me how to upgrade my iphone 4 from 4.2.1

can anybody tell me how to upgrade my iphone from 4.2.1

Connect your iPhone to the computer with which you normally sync and
use iTunes to update to iOS 6. Future updates can be done over the air
using only a wifi connection.

I am purchasing a apple iphone 4 16 gb - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED

I am purchasing a apple iphone 4 16 gb from a local second hand seller - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED - its looks are like a new phone.

http://www.gazelle.com/how-to/iphone/model-identification
Turn off your Caps Lock - all caps is considered shouting and rude.
Many will not read your post if suject/body is in caps.

HT1689 MY IPHONE 4 STOPPED SAVING ALL MY CALLS (IN,OUT&MISSED)TO MY CALL LOG ITS ALMOST BEEN A WHOLE MNTH I HAV TRIED EVERYTHING IT SEEMS IV DID ALL THE RESETS YOU CAN DO. DO I JUST NEED TO TAKE IT UP TO APPLE STORE OR CAN ANYBODY TELL ME HOW TO FIX MY P

ITS ALMOST BEEN A WHOLE MNTH I HAV TRIED EVERYTHING I DID ALL THE RESETS AND RESTORE YOU CAN DO. CAN ANYBODY TELL ME HOW TO FIX MY PROBLEM OR HAVE ANY OTHER SUGGESTION I WOULD BE ABLE TO DO ON MY PHONE OR HAVE I PRETTY MUCH TRIED EVERYTHING THAT I CAN DO AND NOW NEED TO TAKE IT UP TO AN APPLE REP AT THE APPLE STORE?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Can anybody tell me how to implement

hi guys
can anybody tell me how to impletement the bussiness content cubes . our company has impleted bw in china for a retail induarty . now they have copied the same template to korea . they want to implement same in korea as that of china bw . plz let me know how to install and run the query on this bussiness cubes. asap. thank u

kumar,
that's an extremely complicated question you have there - but we can start with the more basic answers:
- to activate business content cubes/infosources/infoobjects/etc. in BW, in your DEV box, run tcode RSA1, go to Transport Connection and select the business content you want to activate. and then click transport and activate. (you'll have to transport those entries to PRD later on naturally)
- to activate the data sources (extractors) in R/3, in your DEV box, run tcode SBIW, and click on "Install Application Component Hierarchy", as well as "Install Business Content" - you'll need to transport them later on too.
of course, i'd suggest that you take some training or read some more guides at help.sap.com or service.sap.com to help you with your objectives a lot more.
if these were helpful, do give some stars out. and if you have any more questions, don't hesitate to ask.
ryan.

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values <i>should</i> be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

Can anybody tell me how many text elements are there in sap scripts?

hi all,
can anybody tell me how many text elements are there in sap scripts?

Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements

Help!!! Can Anybody tell me how to read bookmarks of MS word using ABAP?

It took me around 3 days , but there is still no solutions...
Can Anybody tell me how to read bookmarks of MS word using ABAP ?
Many thanks.

Dear Nick ,
Thanks for your attention!
I have MS word installed in the R3 server , and I uploaded my word doc with some self-defined bookmarks into SAP R3 system.
Now I want to read these bookmarks using ABAP in this R3 system...
Is it clear enough?
Looking forward to your solution ...
Thanks again..
Best Regards,
Leon.

Plase can anybody tell me how to use SETS (GS01/02/03) in ABAP program

Plase can anybody tell me how to use SETS (GS01/02/03) in ABAP program

http://wiki.sdn.sap.com/wiki/display/Snippets/Reading+Sets+-+GS01+-+GS02+-+GS03

HT1414 Can anybody help me my iphone is not starting it only shows apple logo and is not going any further i have tried to hard reset it but it still doesnot starts.Will anybody tell me How To start it...

Similar Messages

Maybe you are looking for