HT1414 how do you reset my ipod touch..daughter try passcode too many times now its disabled

how do you reset my ipod touch..daughter try passcode too many times now its disabled

Passcode Locked or Disabled
If nothing else will let you unlock the device - after so many unsuccessful attempts will be locked out - You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the Device.
Instructions can be found here.
http://support.apple.com/kb/ht1808

Similar Messages

  • How do you reset your ipod touch's restriction code?

    how do you reset your ipod touch's restriction code?

    If you no longer the restrictions code, you'll need to restore your iPod to factory settings in iTunes.
    B-rock

  • How do you reset an ipod touch when it is still stuck in recovery mode?

    how do you reset an ipod touch when it is still stuck in recovery mode?

    Having the same problem. Plugged into the computer, iTunes doesn't connect to it. Plugged it into the wall and the low battery bar shows up but then it goes to the black/apple screen and stays there. The screen goes black and then when it pops back on again (on its own), the apple is still there. Won't hard restart either. Halp!

  • How do you reset an ipod touch when a child has locked it up?  we cant even access the screen to enter passcode. ipod is disabled and ask to connect to itunes but itunes asked to unlock

    my niece's touch is disabled due to a child trying to unlock it too many times. we connected it to itunes but it asks to unlock it. we cant even access the passcode screen to try to unlock it. it locked up months ago and has been abel to use it and she dont knoe the password to her email account to receive communication from itunes or apple so we esstablished a new account but cant connect hte device to the aplle id account. any suggestions?

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen

  • How do you reset an IPOD touch when you don't remember passcode?

    We have an old IPOD Touch and don't remember the passcode.  HOw do we reset it to factory settings?  ITunes will not recognize the IPOD.

    See http://support.apple.com/kb/HT1212
    Try these steps if iTunes won't recognize it: (assuming you have Windows) http://support.apple.com/kb/TS1538

  • How do you reset your iPod Touch 5th Gen if you do not know the restrictions password?

    I have an iPod Touch 5th Generation and i need to reset it because i am having issues with it not loading basically anything since i did the update. I don't know the restrictions passcode so i was wondering if there was any way to reset it without the password.

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
    - If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
    How to reset forgotten Restrictions...: Apple Support Communities
    - How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

  • How do you reset an iPod touch if the password is forgotten?

    My daughters new Touch is now locked as she cannot remember her obscure password. How do I reset so that it is usable again?

    U will need a computer with internet connect
    plug the ipod into the computer and open itunes if it does not open
    when it finds the ipod click on the ipod's tab click on the restore tab this restores to factory settings then sync all apps and music etc back on to the ipod

  • HT4113 How do I reset my iPod 4 after my passcode on my lock screen is disabled?

    I disabled it so many times that it says "iPod is disabled connect to iTunes." I don't know how to fix it!

    If You Are Locked Out, Have Forgotten Your Passcode, or Just Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore or have forgotten your restrictions passcode, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.
    If the above doesn't work or you see the screen image showing you need to connect to iTunes:
    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the screen pictured below,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT1212 how can i reset my password on my ipod touch someone made too many attemps now its saying connect to itunes and when i connect to itunes its saying unable to connect because the phone is locked

    how can i reset my ipod touch if someone made too many passwords on my ipod touch

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT201304 How do i reset my ipod touch

    how do i reset my ipod touch?

    Why are you doing this?
    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414  ( https://discussions.apple.com/thread" - A restore erases the iPod. If you restore from backup the iPod will be like it was IF the iTunes library includeds [sic] all the synced media like apps and music since those are not included in the backup.")
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How do you unlock an ipod touch when its been disabled

    how do you unlock an ipod touch when its disabled

    http://support.apple.com/kb/ht1212
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • How do you reset your ipod

    Hey i am wondering how you reset an Ipod touch?  i locked my self out and now it is disabled. when i connect to itunes it say this device is locked and canot connect to itunes. i just want to resset it all toghther.
          Thanks a lot you guys!

    Connect the iPod to your iTunes library in recovery mode and restore it.  See this article for instructions on getting your iPod into recovery mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • HOW DO YOU RESTORE YOUR IPOD TOUCH

    how do you restore your ipod touch to factory settings?

    Connect the Device to the iTunes library you Usually Sync with, click on the Device tab that appears in iTunes and click Restore.
    Or,
    Settings > General > Reset > Erase All Content and Settings

  • How do you unsync resync ipod touch apps?  It keeps booting me off.

    How do you unsync resync ipod touch apps?  It keeps booting me off.

    - Reset the iPod, nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - The remaining items of:
    iOS: Troubleshooting applications purchased from the App Store
    - Last, restore the iPod

Maybe you are looking for

  • NVIDIA GeForce 8600M GT with 512MB   vs.   256MB   - MEMORY QUESTION

    how much difference will i see between the NVIDIA GeForce 8600M GT with 512MB of GDDR3 memory, and the NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory?? i will be doing HD editing on FCP.

  • Open Error 5

    My macbook recently went through a hard drive upgrade. Mac Unibody mid 2009, 2.26 GHz, originally 160 GB HD and 2 GB RAM. My mac now has a 1 TB HD. I had it installed about 2 months ago and it has been working fine. All off a sudden my mac would not

  • Useless and vague error while building installer

    So I am trying to build an installer for one of my .exe's that I have built.  The .exe works just fine but when I start to try to build an installer I get this unusually vague and useless error.  Can anyone tell me what this means?

  • How to change or set language in abap web

    Hi Experts: I use RSRT1 to run query by ABAP Web , how can I change or set the display language, thanks

  • Send Query Results to Application server in CSV format

    HI All, I need to schedule a query on a regular basis and send the results to Apllication server in csv format(rows will be more than 65,000). I tried RSCRM_BAPI transaction but i think it has lot of restrictions like, cannot use texts, calculated ke