HT1414 I have an Iphone 3GS 16gb which was working on ios 4.1.1 The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able to search for networks. it shows no services.

I have an Iphone 3GS 16gb which was working on ios 4.1.1
The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
to search for networks. it shows no services.

Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!

Similar Messages

Not able to search for FF IDs on clicking Super user access tab in request

Hi experts
in GRC AC 5.3 CUP , Im trying to create new request with Superuser Access request type . On selecting the request type , I get the superuser access tab enabled in the request , Now when I click on that , I am not able to search any Firefighter Ids which are present in the backend SAP system .
However when I try the same in anohter CUP box in the landscape , it worked .I could see all the FF Ids in that system
What configuration do I miss in the first box which is not allowing me to view the Ids on search .
Thanks

Yes , I had chosen a wrong connector . you are right .
if the connector is working fine , all the Firefighter Ids are fetched properly.
Thanks

I have an iphone 3gs in which sleep/wake button not working. i have got stuckn in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone??

i have an iphone 3gs in which sleep/wake button not working. i have got stuckn in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone?? Please help...and thaks in advance

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all I have on the screen is the apple logo.I have hooked the phone up to itunes but nothing is happening.What do i do.Can someone help???/

I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all i have on the screen is the apple logo.I have hooked the phone upto itunes but nothing is happening. What do i do? Can someone help please???

Sorry, due to the Terms of Use problems with jailbroken devices can't be discussed here.
You can only get help from those people who told you to modify the software, only they know what the jailbreak did to the firmware.

I have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???

i have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???

Try going to settings/general/reset/reset network settings and do that

HT1926 I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contact

I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

When i update the i tune 10 after that i am not able to open iTunes. Getting message This copy of iTunes has expired. please help to solve this issue

When i update itune 10 after that i am not able to open itune i get the message This copy of itune has expireed

Here's a previous discussions that seems to have solved a similar issue in the past:
https://discussions.apple.com/message/12209861#12209861

Hi, iTunes is no longer syncing my iPhoto library to my iPhone 4. Everything was syncing fine when I first got the phone, but, over the past week or so, it's stopped syncing photos. Now, after attempting to start from scratch by deleting all the photos

Hi,
iTunes is no longer syncing my iPhoto library to my iPhone 4. Everything was syncing fine when I first got the phone, but, over the past week or so, it's stopped syncing photos.
Now, after attempting to start from scratch by deleting all the photos on my iPhone, iTunes won't sync ANY photos from iPhoto back to my iPhone. I've restarted my phone, computer, etc., force quit all photo-related apps on my iPhone, and tried various combinations of turning iTunes' photo syncing on/off, switching photo sync folders, etc., all to no avail -- I can't get my iPhoto library back on to my iPhone no matter what I do.
Anyone encounter a similar situation? (I've already sent feedback to Apple.) Thanks in advance.

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

HT1414 I have an iPhone 3GS and I got a confirmed unlock request with AT&T they said just hook to iTunes and restore and backup and it should be unlocked but doesn't unlock. Any suggestions?

I have an iPhone 3GS and I got a confirmed unlock request with AT&T they said just hook to iTunes and restore and backup and it should be unlocked but doesn't unlock. Any suggestions?

Yes, setup as a new device.

I want to buy a appleTV but still have a iphone 3gs. Will everything work as with a iphone4?

I really want to buy a appletv but still have a iphone 3gs. I want to know if everything will work the same as if using it with a iphone 4 (photos, videos, music etc.)

Speed might not be optimal, but you'd be best using home sharing from a computer and controlling your Apple TV with the Remote app anyway.
The direct answer to your question is yes, it will work.

Help: I want to auto schedule a load using file watcher but it runs only once for the first time and after that it is not running at all

Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
     credential_name => 'cred',
     username        => 'XXXX',
     password        => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
   file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
     (payload.file_timestamp,
      payload.directory_path || '/' || payload.actual_file_name,
      payload.file_size,
      'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
    program_name        => 'prog1',
    program_type        => 'stored_procedure',
    program_action      => 'YYYY',
    number_of_arguments => 1,
    enabled             => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
    program_name        => 'prog1',
    metadata_attribute => 'event_message',
    argument_position   => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
    file_watcher_name => 'file_watcher1',
    directory_path    => 'D:\AAAA',
    file_name         => '*.txt',
    credential_name   => 'cred',
    destination       => NULL,
    enabled           => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
    job_name        => 'job1',
    program_name    => 'prog1',
    queue_spec      => 'file_watcher1',
    auto_drop       => FALSE,
    enabled         => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.

Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE    12.1.0.1.0    Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2    DBMS_SCHEDULER.SET_ATTRIBUTE
3       ('file_watcher_schedule',
4        'repeat_interval',
5        'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2    -- create credential using operating system user and password (fill in your own):
3    DBMS_SCHEDULER.CREATE_CREDENTIAL
4       (credential_name     => 'cred',
5        username          => '...',
6        password          => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2    (WHEN      timestamp,
3      file_name varchar2(100),
4      file_size number,
5      processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2    (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5    INSERT INTO ZZZZ VALUES
6        (payload.file_timestamp,
7         payload.directory_path || '/' || payload.actual_file_name,
8         payload.file_size,
9         'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2    DBMS_SCHEDULER.CREATE_PROGRAM
3       (program_name          => 'prog1',
4        program_type          => 'stored_procedure',
5        program_action      => 'YYYY',
6        number_of_arguments => 1,
7        enabled          => FALSE);
8    DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9       program_name         => 'prog1',
10       metadata_attribute => 'event_message',
11       argument_position   => 1);
12    DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create file watcher:
3    DBMS_SCHEDULER.CREATE_FILE_WATCHER
4       (file_watcher_name   => 'file_watcher1',
5        directory_path      => 'c:\my_oracle_files',
6        file_name          => 'f*.txt',
7        credential_name     => 'cred',
8        destination          => NULL,
9        enabled          => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create job:
3    DBMS_SCHEDULER.CREATE_JOB
4       (job_name          => 'job1',
5        program_name          => 'prog1',
6        queue_spec          => 'file_watcher1',
7        auto_drop          => FALSE,
8        enabled          => FALSE);
9    -- set attributes:
10    DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
1 row selected.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
        57 N
2 rows selected.

After creatinf apple id not able to use for downloading apps

Not able to create apple id

Have you logged in on another computer before? If yes, have you authorised your current system?
What happens when you log in? Do you get an error? Please be more specific

I have 32 gb ipod and i inst new os 5.1 but after that i am not able to add movies...so plz help me

i have 32 gb ipod and in last week i int the new os that is 5.1 but after the same i am not able to add movies and music ...so plz help me in this

Do you really mean iOS 5.1, or do you mean iOS 5.0.1? If you do mean iOS 5.1, that has not yet been released yet so you you have a beta version, for which we cannot provide help here. If you are a registered Apple developer, you hvae recourses through which to request assistance and report problems.
If you have iOS 5.0.1, post back with details - your model of iPod (3rd generation or 4th generation), the operating system on your computer, the version of iTunes, and the exact symptoms of the problem - and someone here can probably then offer suggestions.
Regards.

HT1414 I have an Iphone 3GS 16gb which was working on ios 4.1.1 The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able to search for networks. it shows no services.

Similar Messages

Maybe you are looking for