HT1414 i have iphone 4s. i could not connect wifi connection. i did restore even didnt work

hi i have iphone 4s. i couldnt connect to wifi. i tried restore but didnt work

Basic troubleshooting steps outlined in the manual are restart, reset, restore from backup, restore as new.  Try each of these in order until the problem is resolved.  If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation.  Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

Similar Messages

  • IPad2- Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.

    IPad2- cannot open page, Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.
    Message is almost acting like a pop up.

    Hi
    I constantly get same message.  When I open up my windows laptop all works fine so I guess it's a bug that apple refuse to admit to.

  • TS1368 itunes could not connect to itunes store . an unknown error occurred (11556)

    Can any bady help i have problem with iTunes could not connect to iTunes Store.and unknown error occurred(11556)

    There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Server admin could not connect to localhost

    Hi,
    the Problem I have is that I could not connect to the server at localhost. Server admin shows connection error.
    Maybe it is a problem with my certificate state. I have deleted the default one and have to recertificate my own one.
    Any ideas?

    Others have posted in the past that the SA or WGM has 'issues' when the default cert is blown away.
    Have you considered doing a clean install on another volume, then move the default from that install back into your current one? Just an idea before I've had my first coffee.

  • Nokia Phone Browser "could not connect to the phon...

    Hi friends, I have a Nokia N72 mobile and am using PC suite 6.81.13.0. My problem is that I can't see the folders within my phone memory or memory card using nokia phone browser. As soon as it shows connected, I click on file manager and the error appears. Although it shows Nokia N72 connected I get a message that says "Could not connect to the phone" even though it is definitely connected. Windows explorer eventually opens and although Nokia N72 is visible no folders/files below this are. Only the synchronization option is working fine. This problem is same both with data cable and bluetooth dongle. I have also installed the latest version of nokia pc suite but of no use. Plzz help me out as it is very urgent...Hoping for early response... Thanx in advance...

    Also experiencing the Cannot connect to OVI Account Server issue.
    I turned off my firewall; confirmed correct account information and Internet connectivity via account sign in on ovi.com website. Can not update MfE or Music player on my 5800 XpressMusic (RM-428) via Ovi Suite as a result of this account server connectivity issue.
    I was able to perform the updates via NSU 3.0.223.
    I echoed this posting to the "Give Us Feddback" section of Ovi Suite.
    System Information
    Nokia Ovi Suite 3.0.0.284  
    Nokia PC Suite 7.1.51.0 
    Ovi Player 2.1.11020.2
    PC Connectivity Solution 10.50.2.0 
    Connectivity Cable Driver 7.1.36.0
    Nokia Ovi Suite Software Updater 2010.44.0.60888
    Maps Service API 4.0.24.1
    Nokia mPlatform 2.7.44
    Ovi Desktop Sync Engine 1.4.1.42
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 3
    Language: English
    Detected internet browsers:
    - Microsoft Internet Explorer 8.0.6001.18702 (Default browser)
    - Mozilla Firefox 3.6.13
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 5512), In use.
    Detected USB drivers:
    - Default Hub Driver for USB 5.1.2600.5512
    - USB Modem Driver 5.1.2600.5512
    - EHCI eUSB Miniport Driver 5.1.2600.5512
    3390 - 6103b - 6133 - 6290 - 6301b - N78-3 - 5610d-2b XpressMusic - 5800d-1b XpressMusic, N900 RX-51, N8-00, C7 Astound, 808 Pureview, Lumia 1020.
    Nicer phones and still no one calls me!

  • 'could not connect to administration server" in essbase console

    Hello friends,
    while i was trying to login to eas console iam getting this error message as "could not connect to administration server" even after restarting the services.
    Thanks in Advance..

    Rakesh,
    Is this the first time you are trying to log on to EAS console ?
    First check if your database is up or not ( with which essbase configuration is done).
    If your db services are running, then Go to Oracle EPM system, EAS and Start Administration Services from Start Programs ( I assume you are on 11 and on Windows).
    If still you get the same problem, then check the logs.
    @Prabhas,
    To my knowledge and based on Essbase architecture, both EAS and Essbase services are different. If Essbase is up and EAS is down, still you can access Essbase through add-in or some other tools.

  • HT201269 I used iTunes to backup up my iPhone 4 version 7.0.6 bought a new iPhone 5 and when I connect the new phone I get "iTunes could not connect to this iPhone. You do not have permission."  How do I fix this issue?

    Itunes 11.1.5
    Mac OS X 10.7.5
    IPhone 4 7.0.6
    IPhone 5 7.0.6
    Ikeep getting this error when I attach the new phone.  After it would not work I did a Icloud back up of my old phone and restored it on the new phone, but I have other music and apps on my Itunes that I would like the option to sync and I like to be able to backup my phone on my Mac.  What do I need to do to get the new phone attached back to this itunes?
    iTunes could not connect to this iPhone. You do not have permission.

    Im having the same problem after installing ios7.1
    Checked the usb status and it sees an iphone ( 4s ) attached,
    Repaired disc permissions
    updated and reset iphone
    and itunes
    reinstalled mavericks from scratch
    phone alert saying " TRUST THIS COMPUTER?"
    hit trust
    same alert keeps appearing
    again and again
    itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
    what the actual F*** is going on and can anybody help ??????

  • TS1538 Since my iPhone 4 update I can no longer up date it through my computer I am running windows 7 and before the iPhone update I didn't have any problems now I get the error message iTunes could not connect to this iPhone. An unknown error occurred (0

    Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)

    From this support document http://support.apple.com/kb/TS3694 see this:
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets.

  • I have completely disabled my iphone 3gs. It says "Iphone is diabled connect to itunes", but when I connect it to itunes, itunes says "could not connect because it is locked with a passcode you must enter your passcode on the iphone before it can be used.

    My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks

    You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808

  • When i connect my iphone to my pc i get "itunes could not connect to this iphone. An unknown error occurred (0xE8000012) i have the correct itunes i also tried to reset my phone, i did this before i went to bed and it was still trying to reset when i woke

    when i connect my iphone to my pc i get "itunes could not connect to this iphone. An unknown error occurred (0xE8000012) i have the correct itunes i also tried to reset my phone, i did this before i went to bed and it was still trying to reset when i woke the next day should it take this long?

    http://support.apple.com/kb/TS3221

  • I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

    I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

    I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please

  • Itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    http://support.apple.com/kb/ts3221

  • Have PC, Iphone and Ipad. IPhone synchs but IPad sync generates "could not connect to Iphone 0xE8000065" error (not Ipad!)

    I have a PC, Iphone and Ipad. The IPhone synchs but an IPad sync generates a "could not connect to Iphone 0xE8000065" error!
    It thinks I am syncing the Iphone again as opposed to the Ipad.
    I rebooted both but Apple failed to sync the Ipad again.
    Thoughts?

    I have been syncning fine until this so I was relcutant to believe anyhting need to be changed.
    Howver I control - alt - deleted to get MS task manager and then disabled all Apple processes and then rebooted. I also renamed "Ipad" as Ipad1.
    Not sure then which if either was responsible for the cure but it is now working.
    Why do Microsoft and Apple find it so difficult to play together?

  • ITunes could not connect to this iPhone. You do not have permission.

    iTunes could not connect to this iPhone. You do not have permission.
    Upgraded iPhone 5 to IOS v7.1 last week and now my Macbook Air(OS X 10.9.2) will NOT recoginize it and continually gives the error message "iTunes could not connect to this iPhone. You do not have permission." when plugged into iTunes (11.5.5)
    Called Mac service they told me to restore phone to factory settings - done NO change
    Tried different USB cables -NO change - plugged ito friends MacBook - it recognizes the iphone; plugged in froends iPhone to my MBA and iTunes recognozes it.
    Took to Mac Service Shop - they told me to reinstall iTunes - done NO change
    Back to Mac Service shop - told me to reinstall Maverick - done No Change
    H E L P
    I now have a factory restored iPhone with NONE of my contacts, messages or apps on it - USELESS
    A backup of the iPhone sits on my Macbook Air but it won't recognize the iPhone so that is also USELESS
    HELP
    PLEASE any suggestions? This is really frustrating OBVIOUSLY there is a bug on the MBA and/or Maverick that is blocking this iphone ONLY
    H  E L  P

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • IOS 7.1 and " iTunes could not connect to this iPhone. You do not have permission." BUGGING ME NOW

    Checked the usb status and it sees an iphone ( 4s ) attached,
    Repaired disc permissions
    updated and reset iphone
    and itunes
    reinstalled mavericks from scratch
    phone alert saying " TRUST THIS COMPUTER?"
    hit trust
    same alert keeps appearing
    again and again
    itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
    what the actual F*** is going on and can anybody help ??????

    Did you resolve this yet? It took me 3 hours on the phone with support over 2 sessions, but they found the solution.
    From the Finder menu:
    Go/Go to Folder...
    Enter: var/db/lockdown
    Select everything in folder and delete
    Restart computer
    Launch iTunes and plug in phone. It should work (that's what did it for us).
    Good luck.

Maybe you are looking for

  • To change payment block option in Propasal list(F110)

    Hello, I need help about automatic payment transaction (F110 Tcode).  In edit proposal payment screen it is only possibly to change payment block option in lines one by one  according to vendor (and customer). We need to change multiple lines (by use

  • How do you change the Spotlight Search from Google to Yahoo???

    Does anyone know how to change the Spotlight Search setting in Safari 4 (Non Beta) from Google to Yahoo? I assume there is a way to do this though Terminal but all I can find are commands for the the Beta and not he final version.

  • General Questions and HELP!

    We have a website which currently uses frames. This website is not an e-commerce and will not be an e-commerce site. This website is heavy on showing product. If you would like to view the site it is: http://www.aaglobalind.com Our site is hosted on

  • Xml to B1 scnario

    Hi all, i am going to data pushing xml to B1 scnario. This is my xml i was given root tag - sko:AK_Order  it's not working  after i was given AK_Order that's also not working. again i was trying to Orderinfo also but that's also not working . The abo

  • How to delete all sms message at once?

    I've gotten myself into a mess where I have over 900 SMS message (texts from Outlook, Facebook, friends messaging me, etc.) and I want to try to just CLEAR them all out - don't want to save any of them. Is there an easy way to do this, or do I have t