HT1414 i need a passcode? for my ipod?
Does anyone know the passcode for resting the ipod touch?
Sounds like you forgot your screen-lock passcode. In that case:
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
Similar Messages
-
HT1414 i forgot my passcode for my ipod
We are locked out of my daughters ipod. one of her cousins put a passcode on it, and we dont know what to do. any suggestions please?
Hi Shep,
Here are the instructions:
http://support.apple.com/kb/HT1212
Cheers,
GB -
I forgot my passcode for my ipod
I forgot my passcode for my ipod touch. What do I do?
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
What should l do if l forgot the passcode for my ipod touch 4 generation
what can l do if l forgot the passcode for my ipod touch
The instructions say:
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
How can i find a passcode for a ipod
how can i find a passcode for my ipod it want let me go any futher
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
i have a 2006 imac (intel) w osx 10.4.11 and need to update for new ipod touch? software updates says up to date, but itunes requires 10.5 or higher? any solutions?
i have a 2006 imac (intel) w osx 10.4.11 < Tiger
It's not just iTunes you need to update...
You need to upgrade to Leopard v10.5.8 at the very least in order to sync, restore, and backup an iPod touch.
See iPod touch system requirements here.
Leopard is available from Amazon here. -
How do I reset my passcode for my iPod?
I forgot my passcode for my iPod, and I don't know how to recover it, I don't have the computer I used to so I don't know what to do. Please help!!
Place the iPod in recovery mode and restore via iTunes on a computer. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
i forgot my passcode for my ipod and ive tried it so many times that now it tells me ipod is disabled connect to itunes and i dont see anything that talks about the passcode
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
-
My grandson has forgotten his passcode for his Ipod. How do we get it back to work?
iOS: Forgotten passcode or device disabled after entering wrong ...
-
I forgot my passcode for i ipod please help
i forgot my passcode for my ipod how can i reset it
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTuns purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT1911 how can you retrieve your passcode for your ipod if you have forgotten it?
how can you retrieve your passcode for your ipod touch if you have forgotten it and it became disabled?
You cannot retrieve it.
You can do as the manual tells you to do and restore the ipod.
If you are unable to restore, then type "unable to restore" into the search bar at the top of this page by Support and read the resulting help articles. -
What do i do if i have lost my passcode for my ipod touvh?
what do i do if i have lost my passcode for my ipod touch?
Connect the iPod to its syncing computer and restore via iTunes. If iTune asks for the passcode and y can't enter the passcode, place the iPod in recovery mode and then restore the iPod. Fo recovery mode see:
iPhone and iPod touch: Unable to update or restore -
HT201263 i forgot my passcode for the ipod and i didnt have back up
hi there
i forgot my passcode for the ipod and i didnt do back up for long time.
thanks
yasserConnect the iOS device to your computer and tyr to make a backup
iOS: How to back up and restore your content
Then restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup.either the one made abov if you could make one or from an earlier one. See:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How do I reset my passcode for my iPod. My daughter forgot it.
Need help unlocking my daughters ipod. She has forgotten her passcode.
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3:
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
My 7 year old has a passcode on her iPod touch. She forgot it, after multiple attempts at what it could have been, it comes up with disabled etc.....I have tried it in recovery and hooking it up to iTunes (which the device has been previously synced up to) to restore. But the problem I am having is it only gives me the option to update also, to iOS 6.1.3 with the new bug fix which it won't allow you to bypass the passcode. It gets a little into the downloading, turns the iPod on and then asks for the passcode to continue?! I am at a loss as to what to do now, as every forum says put it in recovery and restore. I can't use the 'find my iPhone' app as the iPod is offline. I've tried it on a laptop not prev synced up to and get the same problem. Has any one got any ideas!
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer
Maybe you are looking for
-
How do I change the background color of a BufferedImage?
I have a program and basically what I am doing is drawing on a BufferedImage object and then painting that BufferedImage object onto the panel. By default, the background is black and it draws in white. I am easily able to change the colour for drawi
-
Hello, Forum. I am a student and my final SAP project is due tomorrow. One of the steps is to create a Purchase Order certain specifications. I have defined the needed purchase requisitions for the Purchase order, but I am having a problem Assigning
-
InDesign CS6 will not retain preferences
One of my users was recently upgraded from CS5 to Design and Web Premium CS6. The first issue is that the InDesign program crashes for no apparent reason from time to time. Secondly, the InDesign program will not retain any preferences. If the pro
-
Bapi for posting Outbound Delivery
Hi, Can anyone please let me know about bapi for posting goods issue of outbound delivery.I have checked bapi like BAPI_OUTB_DELIVERY_CONFIRM_DEC If i use the with this bapi i can't cancellation the outbound with vl09. thanks,
-
Hello Experts, Can anyone throw any light how to connect sap xi to a fax machine, like i get a details from the one system and then to xi and then fax the data, any ideas? Is it possible? Regards, Anirban.