HT1430 Cannot send mail, An error occurred while delivering this message
While sending a few emails with a single photo in each I was asked to log in to verify to stop junk emails. Six emails got there but the four after did not, sat in out box. Deleted all emails, sent with no photos, no luck. Switched off and on agian, deleted and re done email account and reset with two buttons. All no good, PLEASE PLEASE HELP. Thanks
I have had the same problem until today. When I updated my hotmail/msn password on a desktop computer, I then had to update it on my iPhone 4S in TWO areas (Incoming and Outgoing, the latter is obviously the issue we're experiencing):
#1 Incoming:
Settings> Mail, Contacts, Calendars> (Select the hotmail/msn email)> Password> (update your password)> Done
#2 Outgoing:
Settings> Mail, Contacts, Calendars> (Select the hotmail/msn email)> Outgoing Mail Server (which is smtp.live.com on my iPhone)> click on smtp.live.com again to get to the password area> (update "Password")> Done> Back> Done
Similar Messages
-
WHy all of a sudden, today, I can no longer send emails (via hotmail) from both iPhone 5s and ipad 2? I receive message that says "an error occurred while delivering this message". I have no problem sending emails from PC.
*** solved ***
You have to add another SMTP server as following steps:
Just go to hotmail acount setting
Then click on SMTP in outgoing mail server
Then click add server
Host name: smtp-mail.outlook.com
User name: your email
Password: your password
So now you can send mail
Thanks -
Anyone getting messages that an "error occurred while delivering this message?"
My email service form iCloud.com is terrible, anyone getting the message "error occurred while delivering this message?"
ichoudhury,
Have you tried the troubleshooting steps suggested in http://support.apple.com/kb/TS1426 ? Have you tried sending while connected to a different network as well?
Another good step to try might be resetting network settings. To do so, navigate to Settings > General > Reset. Also, deleting and re-adding the account may be advisable as well.
Hope this helps,
Raleigh -
An error occurred while delivering this message (Iphone 3G)
Basically starting today, I am unable to send :((
few of my colleagues who are connecting to the same server sending just fine but me....
From Iphone, I can
-Access Exchange Address fine
-Update my Contact
-Add Calendar Entry
(all the above shows up instantly when I open up outlook in my Workstation)
Oh also I accessed the https://server/oma just fine (except for the hideous interface of course) ...
So I do not think its anything in the Exchange side (why wouldn't anybody encounter that? Why just me? And if I had something wrong (config winfowise, then how come I am getting email fine, or updating calendar fine?
Any ideas?ichoudhury,
Have you tried the troubleshooting steps suggested in http://support.apple.com/kb/TS1426 ? Have you tried sending while connected to a different network as well?
Another good step to try might be resetting network settings. To do so, navigate to Settings > General > Reset. Also, deleting and re-adding the account may be advisable as well.
Hope this helps,
Raleigh -
I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails. "cannot send mail an error occurred delivering this message"... i have tried to restart phone to no avail. I have tried to delete and re input account to no avail. I need help
Hello lclaunch22
You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/ht1694
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
Thoughts?Hi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh -
WPC Error- Cannot render container : An error occurred while loading the do
Dear All
we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
following messgae appera when we open up a page to edit in WPC
Cannot render container : An error occurred while loading the document from the resource content
we found this exception in error log in Server..
couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
#1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
#1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
#1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
Please tell us how to fix this error
regards
BuddhikeNeed to upgarde to SP14
-
Hi,
I have a Portal install with the following specifications:
OS - Sun Solaris 2.6
DB - 8.1.7.0.0
iAS - 1.0.2.2
Portal - 3.0.9.0.7
It was working fine. Then the initjvm.sql that installs the JVM
in the database was run. This was done as part of the steps
required for enabling the UTL_SMTP. The script ran without any
errors but after that Portal Login was failing with the following
error:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
and there were no Java classes present in the Portal or SSO
schema. To overcome this error I reloaded the SSOHash classes to
Portal and SSO schemas and ran ssodatan. The script ran
successfully and I was able to login to the Portal after that.
However, if I login as the administrator and try to create or
edit users from the Administer tab of Portal, the same error
occurs again:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
I can programmatically add users using the Security APIs.
The wwsec_enabler_config_info$ table of the Portal schema
contains one row but the wwsec_enabler_config_info$ table of the
SSO Schema contains no rows.
This install of Portal is hosting a number of applications and as
such running opca again is not an option.
Any workaround for this?
Thanks,
RupeshHi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
Hi,
I've configured SMIME (certificate templates, signing/encryption certificate, etc.)
All users receive their certificate, and in Outlook (2010) everything is working as expected.
When I use the OWA 2013 however to send an encrypted message, I receive the error :
"An error occurred while signing this S/MIME message. No certificate was found. If you have a smart card-based certificate, insert the card and try again."
environment : exchange 2013 SP1, ie 9 and 10
Get-SMIMEConfig
[PS] D:\Scripts>Get-SmimeConfig
RunspaceId : 24178a41-aead-45fc-a4c2-5504b2541e7e
OWACheckCRLOnSend : False
OWADLExpansionTimeout : 60000
OWAUseSecondaryProxiesWhenFindingCertificates : True
OWACRLConnectionTimeout : 60000
OWACRLRetrievalTimeout : 10000
OWADisableCRLCheck : False
OWAAlwaysSign : False
OWAAlwaysEncrypt : False
OWAClearSign : True
OWAIncludeCertificateChainWithoutRootCertificate : False
OWAIncludeCertificateChainAndRootCertificate : True
OWAEncryptTemporaryBuffers : True
OWASignedEmailCertificateInclusion : True
OWABCCEncryptedEmailForking : 0
OWAIncludeSMIMECapabilitiesInMessage : False
OWACopyRecipientHeaders : False
OWAOnlyUseSmartCard : False
OWATripleWrapSignedEncryptedMail : True
OWAUseKeyIdentifier : False
OWAEncryptionAlgorithms : 6610
OWASigningAlgorithms : 8004
OWAForceSMIMEClientUpgrade : True
OWASenderCertificateAttributesToDisplay :
OWAAllowUserChoiceOfSigningCertificate : False
SMIMECertificateIssuingCA :
SMIMECertificatesExpiryDate :
SMIMEExpiredCertificateThumbprint :
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Smime Configuration
DistinguishedName : CN=Smime Configuration,CN=Global Settings,CN=customer,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=customer,DC=com
Identity : Smime Configuration
Guid : 1184683a-2fcd-446b-98a6-bf0fb16ca282
ObjectCategory : customer.com/Configuration/Schema/ms-Exch-Container
ObjectClass : {top, container, msExchContainer}
WhenChanged : 17/06/2014 14:21:52
WhenCreated : 17/06/2014 14:21:52
WhenChangedUTC : 17/06/2014 12:21:52
WhenCreatedUTC : 17/06/2014 12:21:52
OrganizationId :
OriginatingServer : DC1.customer.COM
IsValid : True
ObjectState : UnchangedHave you set up a virtual certificate collection? Looks like that's new with Exchange 2013:
http://technet.microsoft.com/en-us/library/dn626158(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dn626155(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
An Error occured while processing this page. check the log for details
Hi ,
when i open an browser http://localhost:8300/HyperionPlanning/AppWizard.jsp
i get an error stating that :: An error occured while processing this page. check
the log for details
i am not aware where to look the log files.
second issue. on anothor desktop i am able to login but when i create an sample application it moves forward until finish and takes lot of time and gives me an same error as above .
please help me out ASAP iam tired uninstalling and reinstalling the products.
please mail me at [email protected]....
thanks and regards
REDHi,
If you are running planning as a service could you stop the service, then run planning server from the start menu.
If you try and log in again it should produce some error messages.
Cheers
John
http://john-goodwin.blogspot.com/ -
New subcription to ExportPDF - "Error occured while signing in" message???
Just pruchased ExportPDF subscription and cannot sign in - Tools > Convert to word > bypass to Sign in in uppoer right corner > enter email > enter password > death circle > "Error occured while signing in" message - continuous loop.................
Hi Scott,
Could you try these steps to alleviate the access issue you're having:
Choose Edit > Preferences (Win) or Adobe Reader > Preferences (Mac)
Click 'Online Services' on the left-hand side
Sign out of our Adobe ID and sign back in.
Try to convert your document again.
If you continue to have trouble, please verify that you can access the service via the web interface. To do this:
Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
Try to log in with your Adobe ID (email address) and password
Once logged in, follow the on-screen prompts to convert a file
Let us know if you're still having trouble and we'll try to help!
-David -
An Error Occurred While Processing This Page. Check The Log For Details. Pl
Hi,
I started getting this error while opening the app
Application was working fine. All of a sudden this error came while opening the application.
" An Error Occurred While Processing This Page. Check The Log For Details. Please Close The Current Tab and Open Application Again."
I cannot see calc manger rules for this means in calc manager I am not able to see this app.
Also, in logs I see
java.lang.RuntimeException: Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
I am not able to get why this is occurring.
Any help?If it is not important then you can try deleting and recreating the application, if you want to be sure after you delete the application then drop/recreate the Oracle schema.
If you have problems deleting the application and have to remove it manually the following post might be helpful Planning 11.1.1.3 - Manually Delete a Classic Application
Cheers
John
http://john-goodwin.blogspot.com/ -
An error occurred while loading this content / Apple tv 3
please i need help i cannot stream rented movies on my apple tv 2 or 3 .. this message occured (an error occurred while loading this content
Has any other fixes been found. Since I updated to the latest iOS I've been having a similar problem. It doesn't matter what I stream through either. I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix.
I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows. I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on. Frustrating to say the least. -
Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!
Maybe you are looking for
-
Hai Friends, The following is my selection screen. Sales Office: (Parameters) Month/Year: (Parameters) Customer: (Select Options) All the fields are mandatory. i enter the Sales Office as '5001' and Month/Year as '03/2009' and Customer as 100640 to 1
-
Thunderbolt port No device connected
Just purchased a new tb harddrive and when I connect it to my Macbook Pro 17 (early 2011) it doesn't recognize it? I am running Mavericks. It doesn't show up in disc utillity and if you look in system profiler under thunderbolt it says No device conn
-
I said I didn't want Siri when downloading ios6 when I do want it! How do I now get it?
I want Siri on ios6 but when downloading it I said I didn't want it ! How do I now get it?
-
Hi All, I have a scenario where in I need to pick one zip file from FTP and pass it to SAP system over proxy communication.I have searched on SDN,find blogs on outbound proxy but didnt get much information on inbound proxy with attachment. Or please
-
After deleting Win at partition 3, there is still Windows option at startup
I bought an SSD, and hooked it with my old hdd to my system. There was a Mac and Win partition in my older drive. I erased system files, but couldn't formatted it because it has important info. Now at startup, i managed to erase second Mac option and