HT1438 Estimated cost and turnaround time for new iPad screen replacement?

Looking to see what others have experienced in roundabout cost and turnaround time for screen/glass replacement on new iPad... Everything else seems to be in working order...

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
 Cheers, Tom

Similar Messages

Apple Tech. Service Turnaround Time For Repairs?

I contacted Apple today and made arrangements to send my phone in for either repair or replacement (hope it's repair...) because my usage meter is still not functioning...and my touchscreen has suddenly lost a big degree of sensitivity, taking sometimes 2-3 taps for each function.
They were kind enough to wave the $30 loaner fee for me, and my Apple Care loaner should be here tomorrow.
My question: how long is the turnaround time for normal repairs or replacements with Apple?
I would like my phone back ASAP, naturally.
Thanks for the help!!

You're welcome.
I realize this process seems like it will be inconvenient but it actually works quite well. I went through this within the first few weeks after 6/29 due to occasional crackling with the earpiece. My iPhone was exchanged for a new one and I was impressed with the process. I preferred having Fed-Ex deliver the loaner iPhone - using the same box to return my iPhone and doing the same with my replacement and the loaner iPhone. For me this is preferable than driving to a store and waiting in line, etc. and then returning later to repeat that process. I like doing this from the comforts of home or in my situation, from the comforts of my office.
Don't sweat it - it will end up being all good.

If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
tt2

Very slow turnaround time for development

          Is there any way to speed up the turnaround time for developing J2EE applications
          with pageflows? I make a minor change in my JSP or my JPF and the time it takes
          to build and run again is pretty bad. Don't you guys do any incremental compilation?


          Change in JPF will take time. but in JSP, it's ok.
          "Gerald Nunn" <[email protected]> wrote:
          >"Jim Thomas" <[email protected]> wrote in message news:40b68668$1@mktnews1...
          >> Is there any way to speed up the turnaround time for developing J2EE
          >applications
          >> with pageflows? I make a minor change in my JSP or my JPF and the time
          >it
          >takes
          >> to build and run again is pretty bad. Don't you guys do any incremental
          >compilation?
          >
          >JSPs and JPFs are automatically re-compiled for you when the server is
          >in
          >development mode, no need to do a manual build after changing them.
          >
          >Gerald
          >
          >

What is meant by estimated costs and estimated rows in SQL explain (ST05)?

Hi
I was just wondering if someone could explain/clarify exactly what is meant by estimated costs and estimated rows in the 'explain' / execution path functionality of ST05.
For example, we could see a SQL statement was very inefficient accessing a table:
Estimated Costs = 6.006.615 , Estimated #Rows = 0
Does this literally mean that for 6 million costs / reads / effort, 0 results were returned??
Is this a ratio of efficiency?
We built an appropriate index and now we have:
Estimated Costs = 2 , Estimated #Rows = 1
A lot better! The job was taking 40+ hours and being cancelled; now it takes 5 minutes. So a 3 million times improvement sounds realistic...
However, we had another instance where the explain showed:
( Estim. Costs = 195.077 , Estim. #Rows = 538.660 )
and we built an index, and now the explain is:
( Estimated Costs = 41.867 , Estimated #Rows = 538.660 )
What exactly does this mean - as the costs has been reduced, but the rows is the same?
Thanks
Ross

Hi Ross,
>I was just wondering if someone could explain/clarify exactly what is meant by estimated costs and estimated rows in the >'explain' / execution path functionality of ST05
Take a look at note 766349, point 20.
>An EXPLAIN displays "Estimated Costs" and "Estimated Rows", which
>are simply the CBO's calculation results (refer to Note 7550631).
>Since these results are based upon a number of assumptions (column
>values are distributed equally, statistics), and depend upon the
>database parameter settings, the calculated costs and rows are
>useful only within a margin for error. High "Estimated Costs" and
>"Estimated Rows" are therefore neither a satisfactory nor a
>necessary indication of an expensive SQL statement. Also, the
>calculated costs have no actual effect upon the performance - the
>deciding costs are always the actual ones, in the form of BUFFER
>GETs, DISK READs, or processed rows.
So the costs and rows are values conjured up by the cost optimizer when calculating the access path that is most likely to be efficient. THEY ARE ESTIMATES!!!
>Does this literally mean that for 6 million costs / reads / effort, 0 results were returned??
As per the above, no. The costs and rows are estimated before the rows are fetched so there are no actual results yet.
>What exactly does this mean - as the costs has been reduced, but the rows is the same?
An efficient database access is exactly that; reads only the blocks that contain the rows it needs and nothing else. If the access is inefficient it will spend time accessing blocks that contain no data that is eventually contained in the result set.
This question would be better placed in the Oracle forum...
Regards,
Peter

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

Estimated Cost and Actual Cost

Hi Friends,
Can someone tell me, which MM tables(logically database) has these fields stored?? Estimated cost and Actual cost??
Note : Where and How can I find the logical data base??
Thanks alot in advance,

Yes thank so much for your quick help.
I see here we can get 1- Plan cots , 4 Actual cost, But in PMCO, how can we get the estimated cost, I see that WRTTP = 1 also contain the value for estimated cost but not plan cost . Please help me.
Thanks

Slow authentication time for new BM 3.7 Radius server

Hi,
We are runnign BM 3.7 Radius, authentication only and it works fine on the
original box. I have to decomssion that box and have configured a new server
to replace it. The problem is on the new server the authentication time goes
from 1 sec (from request accepted to logging start on the radius screen) to
20 secs. this is dropping some of our remote clients off. Any idea what is
the problem?
Servers are NW 6 Sp3, BM3.7 Sp2.
I have been searching all day and can't find anything on it.
many thanks,
Gawain :)

Replica placement?
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

In Month View, showing start and stop times for appointments

Hi, I want to show both the start and stop times for all appointments in my iCal Month view and have not been able to figure out how to do that. Any suggestions? - Dave

I would also like to know how to do this if possible. I want to print month-view schedules with start and end times for events. Thought I'd bump this up to see if anyone has any ideas.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

How query cost and execution time are releated ?

hi experts,
i am curious to know, how the query cost and execution time is related?
Query taking less time ,query cost is 65%, but query taking more time but query cost is 0%.
how to connect both and improve query performance.
Thanks

i think you are refering to cost (relative to the batch) execution 65%, where there are more that one statement, it may compare the cost of each statement with in the batch
i assume it mainly take subtree cost and IO stat as cost, but in some cases i may wrong when there is multi line function and many other facter influence the cost, and i would say it depends on the query
cost is unit-less
The reason these costs exist is because of the query optimization SQL Server does: it does cost-based optimization, which means that the optimizer formulates a lot of different ways to execute the query, assigns a cost to each of these alternatives, and
chooses the one with the least cost. The cost tagged on each alternative is heurestically calculated, and is supposed to roughly reflect the amount of processing and I/O this alternative is going to take.
refer :
http://blogs.msdn.com/b/sqlqueryprocessing/archive/2006/10/11/what-is-this-cost.aspx
Thanks
Saravana kumar C

Start and end time for a mapping in process flow

We are executing 6 mappings in a process flow. 4 out of 6 run in parallel . The log file created in a control center denotes start and end time for a process flow. But Is there any way to find out how long those individual mappings took ? Is start/end time logged on a mapping level somewhere ?
Thanks

As well as the repository browser you can use the SQL Developer reports on the utility exchange which are based on the public views.
http://www.oracle.com/technology/products/warehouse/htdocs/Experts/owb_sqldeveloper.zip
You can dig in and see how these are read from the SQL views.
Cheers
David

Get Start and End times for each step in a job

Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
Ryan

Hi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto

Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

Air MD792E/A, iPAD WIFI CELL 32G Space Grey
Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in? Tried to sync with itunes but iTunes can't sync without a password. I cannot see summary on the side bar. How do I restore so I can restart my iPAD Air since it has relatively no history. I have not had the chance to use it yet. Finished set up to as far as the start menu.
<Personal Information Edited by Host>

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1438 Estimated cost and turnaround time for new iPad screen replacement?

Similar Messages

Maybe you are looking for