HT1459 I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it.  All data on the device is gone.  This should not be an issue if the device has been used as designed and regularly synced/backed up.

Similar Messages

  • Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

    Hi there
    I ha
    Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

    Shame you had the iPhone hacked as  O2 usually unlock their customers iPhones happily.
    We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
    However hint ....you have probably trashed it

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

  • IPhone 4S goes back to homescreen everytime I sign into email everything was working fine until I did all the updates I am really frustrated

    iPhone 4S keeps going back to home page when I open email everything was fine until I did all the new updated I am very frustrated, can sny one help

    Have you reset since the upgrade? Hold down the sleep/wake button along with the home button until you see the apple, then let go.

  • My Ipad2 was working fine until i did the update this morning. Now all my internet connections are Very Very slow.

    the icloud was not able to update because my information was different than apple.

    now that i cleared up the icloud problem, how to i redo the software update?

  • TS4268 I'm logged into my apple I'd for FaceTime and messages on my iPad but it still won't let send or receive messages it was working fine at first what can I do to fix it?

    Please help I can't send or receive messages on messages or use face time it sometimes work of I turn off my wifi setting and logout of my apple Id

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

    my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

    After the restore did the phone work properly for a while? Say, a day or so?
    If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
    If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
    Good luck

  • Hi, I have an iPad 2, my email button was working fine until about an hour ago and by pushing the mail button my hotmail messages came up automatically,now when I try I just get the blank page with no messages on? Any help please ?

    Hi,
    I have an I pad2 ,mail button was working fine until a couple of hours ago,when I pressed the button my hotmail messages came up,now when I hit the button I just get a blank template ? Help please !

    No,didn't have any of those but have since solved the problem by following the advice in user guide to switch off and switch back on again,thanks for your efforts anyway.

  • Hi, I have a freecom 1TB hard drive which was working fine until it froze.  I pulled it out (mistake I now know) and now it doesn't mount.  It shows up in Disk Utility but won't manually mount.  When I try to repair it gives message 'failed on exit'.  hel

    Hi, I have a freecom 1TB hard drive which was working fine until it froze.  I pulled it out (mistake I now know) and now it doesn't mount.  It shows up in Disk Utility but won't manually mount.  When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix.  help!

    You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
    http://www.prosofteng.com/
    http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
    http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
    http://www.cleverfiles.com/

  • My ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?

    my ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?

    Try resetting the phone:
    Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.

  • I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
    that's an odd sort of a message (or series of messages).
    hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
    try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
    Using MSCONFIG to troubleshoot conflicts in Windows
    does QT open without the strange message after the selective startup?
    does iTunes launch properly?

  • I've got an apple 3TB time capsule.  It was working fine until we moved to a new house.  The day the ISP showed up to upgrade my speed it stopped working.  Now will not pick up signal.  What happened what do I do?

    I've got an apple 3TB time capsule.  It was working fine until we moved to a new house.  The day the ISP showed up to upgrade my speed it stopped working.  Now will not pick up signal.  What happened what do I do?

    What signal is it picking up? Are you joining wireless network? If so don't.. it is really poor way to run things.
    Is it connected to a cable modem? Full router or just a modem type?
    Try a reset?
    Plug in via ethernet.. turn off everything.. wait 5min then restart cable modem.. if that doesn't work, give it a longer off cycle.. 15min or overnight.
    We need more info.

  • A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

    I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
    Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
    Nick M.

    Hello,
    Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
    As for holding Option and Alt, the internal drive did not show up.
    And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
    Is there anyway I can use Terminal to help reach the internal drive?
    I realize I am asking a lot of questions.
    And I thank you for your time,
    Nick M.

  • IPhone 4S was working fine until recenty after updating the software to the 5.1 version

    My iPhone 4s was working fine until I recently updated the software to version 5.1, now it locks up on nearly any screen and reverts back to the main screen.  Even in settings, if I go in a few tabs in settings all of a sudden it takes me back to the main screen.  I have done a total reset on the phone and it has not helped.
    Also, it is now completely frying the battery goes from 100% to 35% in about 4 hours.  I have killed all apps running and it is still hot and using up the battery.

    I have done all of the above suggested restart, reset and restores using iTunes and without.  No luck.
    What I have found is that under Settings; General; About; Diagnostics & Usage; there is an error message populating every single minute that says low memory.   It appears that the reset back to the main screen coincides with this error message.  I have very little data stored on the phone, 13 Gig available. 
    How does one go about emptying this memory? 

Maybe you are looking for

  • Calling an Executable program in a Web dynpro

    Hi We would like to change the initial screen of one of our functionalities (kilometre claims), but the info after you submit the selection info does not need to change.  We have an executable program with the detail of the screen. I created a new We

  • Why are white blocks appearing in my animation?

    When my animations loads (by clicking the packaging icon), a white block appears in the middle and I would like to know if there is a way that I could change it so it is either transparent or not have the white appear? I made use of a EdgeDocks exten

  • Adobe Illustrator CC SDK

    Hi, Does anyone know when the new CC SDK package for Illustrator will be available?

  • What You Hear

    I have an old Extigy SB0130 on my Windows-7 computer. The Extigy and its PlayStation application work fine, but the Recorder has nothing in its pull-down menu for "Record From". I really want to use the "What You Hear" input. Is there a current Creat

  • Backup started from scratch

    I backed up mu computer via Time Capsue to a USB hard drive connected directly to my computer. I moved that drive to my Time Capsule and told Time Machine to conect to the same drive. However Time Machine is starting over with the backup. It's not si


HashFlare