HT1473 Im having a problem with adding cds to my library when some of the discs in a set have Gracenote information and other discs don't. iTunes in this situation puts the css that are part of a set into different albums, and I don't know how to combine
I'm having trouble adding "spoken word" CDs that are in a set to my library. When some of the discs have "gracenotes" info the album gets broken up as if each cd was a separate album. I haven't been able to figure out how to have all the cds in the set appear as one album. I have entered each one in the "get info" page as "1 of 7" and "2 of 7" etc, but the ones with gracenote info get put into a separate album. It's frustrating so far! Also, when I want copy an album to the burn folder so i can share it with a friend, it moves the songs as songs, not as albums. Any way around this? Thanks very much!
See Grouping tracks into albums.
PS, you don't have the right to burn copies of the songs you've bought/ripped to give away to your fiends...
tt2
Message was edited by: turingtest2
Similar Messages
-
having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Can not update the applications that are part of the Technical Communition Suite (TCS) 4.
The updates... menu is grayed out for all applications that are part of this suit. I know that FrameMaker (FM) 11.0 has updates that should be installed. I have downloaded a patch (11_0_1) for FM and it will not install. I get this message:
I have Admin rights on the computer and have selected Run As Admin.. when I attemp to install the patch.
I have TCS 3.5 also loaded and do not have any issues with loading updates.
OS: Windows 7
Any ideas as to why I can not install updates for the applications that are part of TCS 4?Hi,
Greetings from Adobe.
Please go to C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
There will be a .dat file by the name - AdobeUpdaterAdminPrefs.dat
Capy this file and paste it on your desktop.
Open that file in Notepad from desktop.
Change the value in <Suppressed> tag to ”0” from "1"
<Preferences>
<Suppressed>0</Suppressed>
</Preferences>
After saving the bat file replace it back with the original file at location: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
close the window and then try to install the patch again.
Regards,
Mayank -
Anyone else haveing a problem with appointments not syncing, duplicate appointments when syncing with Outlook? Noticed the problem a couple of days ago.
Also, noticed that my primary SMTP disappeared, and I had to re-establish to send e-mail.
Apple tech support was worthless on both issues.Hi I am also in the UK, but not with Tiscali and am having the exact same problems. I can also send with wifi, but not 3G. I have tried amending all sorts of settings, including those above and amending the smtp server to the settings for my provider, but all to no avail.
It is thoroughly frustrating, as I cannot send emails unless I have wifi access.
Any further suggestions would be very welcome. -
Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!
You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.
-
my backup file is too big? how can i change some of the items that are being backed up to decrease size?
In iPhoto, Select All the Photos you want to move... Then goto > File > Export >
Choose the settings as seen here
Click Export and select your External Drive
Best to create a Folder to put them in... and away you go... -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?
Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
More info on backups here: http://support.apple.com/kb/HT1766 -
in my iPhoto library i have photos of web pages i don't know how they got there there are hundreds of them ,how do i get rid of them and stop them please help me as i have no idea many thanks
im sorry to be a bit thick here i didnt know this was happening until i looked through all my photoes i use an sd card to put pictures on lap top and icloud from my phone but in library there are all web pages i have ever been to ie face book ebay etc i didnt know if there was any thing i should be turning off many thanks for ur last answer though
-
I have been having lagging problems with YouTube videos for a number of months now. It simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again. Even with little 2 and 3 minute videos.
I have a fast computer and my webpages load really, really fast. I have FireFox 4 browser and a Vista Home Premium 64-bit OS. So I don't have a slow computer or web browser. But these slow YouTube vids take way too long to load for some reason.
Does anyone have any idea how I can speed up YouTube?Hi
The forums are customer to customer in the first instance, Only the mods (BT) will ask for personal information through a email link. Would you mind posting your Hub stats & BT speed test results this will help all with diagnosis-
To post the full stats from your router
for home hub - 192.168.1.254
Navigate to ADSL Settings or use the A-Z at the top right
Click on More Details and then post the results.
Run BT speed tester and post the results from http://speedtester.bt.com/
If possible it would be best to connect to the BT master socket this will rule out any telephone/broadband extension wiring also consider the housing of the hub/router as anything electrical can cause problems as these are your responsibility, if these are found to be the case Openreach (engineer) will charge BT Broadband, which will be passed onto you, around £130.00.
Noisy line! When making telephone calls, if so this is not good for your broadband, you can check-
Quite line test dial 17070 option 2 and listen - should hear nothing best done with old type analogue phone digital (dect) will do but may have slight hiss If you hear noise- crackling pops etc, report it as a noisy line on your phone, don’t mention broadband, Bt Faults on 151.
As for your FTTC its available in some areas between 40% & 80% of customers in enabled areas can receive it!
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack.... -
The hard drive on my hp computer died. I installed a new hard drive but I don't know how to access my i tunes library now. Does anyone know about that??
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek -
I don't have ios4.3. and I don't know how to do it . I have been playing this game forever and now I can't . Please help me download it ...How do I do it..
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hi
Twice this last few days, on different sites, FF3.6.10 has forgotten well used Usernames and passwords. First time it re-learnt after manually sign in.
Second time FF totally refuses to learn the Username and Password for the site. Tried 3 times after checking Tools>Options
Not blocked via site exceptions
Privacy> Clear history when FF closes>Settings>Data> PSWD NOT set
Thanks
MikeDo you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
If the latter happens then you have a problem with cookies that are not kept or the file that stores the cookies is corrupted.
* Websites remembering you and automatically log you in is stored in a cookie.
* You must allow that cookie (Tools > Options > Privacy > Cookies: Exceptions), especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
See also http://kb.mozillazine.org/Websites_report_cookies_are_disabled -
My deployed printers don't appear on the computers that are part of the security group
I use the Print Management role to deploy my printers to my users.
Because I only want those printers to appear on certain laptops/servers, I deployed them using the “Per machine GPO”
I created an “Office Printers” security group that contains those laptops/servers
I use this security group to filter my GPO (under Security Filtering)
The above used to work but after modifying and adding new printers, the printers are not getting deployed anymore.
Here is what I see:
- On the laptops/servers I am connecting to (I am the Domain Admin), I can see all the printers
- On some user’s machine, no printers shows
- On some user’s machine, only the printers that were listed in GPO before the changes do show
gpresults –r shows different result:
- Mine shows: Filtering : Denied (Security) even I see the printers
- Some machines show: Filtering: Not Applied (Unknown Reason)
- Some machines don’t show the GPO at allHi,
Before posting my question, i ran gpresult /force and rebooted the machines several times.
I resolved my issue yesterday by "chance":
- since the deployment was failing using the deploy to GP feature in Print Management, I decided to try to deploy them by using directly GPMC.
- I discovered that the printer that I added few days ago was not marked as "shared" (I did not think that it was an issue because I assumed that the Print Management did not need this setting to be set). Since the others were shared, I decided to share
this one as well.
>>>> that resolved the issue: the printers appeared on all the machines as expected.
I feel that MS should look into this behavior:
- Deployment of the printers should not fail if one is not shared
- if sharing is a must to use this feature, deploying the printer from the Print Management should bring an error.
Thanks
Christophe
Maybe you are looking for
-
Need help to display geo-characteristics on a map in SAP BW report
Hello all, Currently I am struggling to display plants on a map of Germany in a SAP BW report, using dynamic geo-characteristics in SAP BW. We do not have the ESRI software ArcView (my superior does not want to buy it), so I have to be successful wit
-
Created a trigger but new values are not inserting in the backup table
I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me create or replace trigger
-
Make a field required based on input in another field
So I have researched the forum to answer the question of how to make certain fields in a form required if a value is entered in another designated field, and not required if no value is entered in the designated field. For example: There is a field t
-
Create Interactive 3D PDF file from Illustrator CS4 DXF or DWG iii
Hi, I posted similar question in the Mac Creative Suite section and Acrobat and I was asked to move my question here to Illustrator so i hope no one gets angry with me. I wasn't sure where to post because I'm not sure what direction to go. I want
-
How can I get rid of all of the duplicates in my contacts without having to go in one at at time?
Some of my contacts are listed 4-6 times...making my contact list over 8000! How can I streamline this without having the delete one at at time PLUS how do I keep this from happening again.