HT1476 I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quic
I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Similar Messages
-
MacBook will turn on to white screen with gray apple and loading bar, will load very little and then turn off. What do I do?
Bescobar23,
which model MacBook do you have, and which version of OS X is installed on it? -
Re: magic mouse
I use Mavericks and I notice that when I put my mac to sleep and have my magic mouse on and when i go to wake the computer up with the mouse on my wi-fi will not connect?
Put if i shut off the magic mouse and put the computer to sleep and turn my mouse back on and wake the computer up the wi-fi connects, this is a bit strange. This there anyone out there with same problem? is this a Mavericks thing that is not working with the apple magic mouse?
Interested in hearing from you.
ThanksMr. iPadfan wrote:
... does my iMac model... support Hibernatemode 3 alias "Safe Sleep" to protect my Mac against damages due to power outage?
You can set hibernate mode to 3, but it seems to me its only benefit could be if power were to be lost after the iMac was already sleeping. Sleepimage is written to disk prior to system sleep. If your iMac lost power while it was "awake" you would certainly lose any unsaved work no matter what hibernate mode you choose.
The problem is that an iMac without power no longer sleeps, it's dead. Upon restoring power you need to cold boot, and I seriously doubt sleepimage can be forced to load in that event. Sleepimage is loaded upon wake from "safe sleep", not from boot as far as I know.
It is simple enough for you to try, so go ahead and see if it does what you want. Other than creating a 16 GB sleepimage file it did not appear to do anything beneficial on the iMac I am using though (a later model).
The file location is /private/var/vm/sleepimage
Configure hibernatemode, verify the file is created, do some work on your Mac, don't save it to disk (and don't use Pages or similar app that saves work on its own), let it sleep, then pull the plug. I think you will see what I mean. -
I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading. -
How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius. Still nothing has worked. I'm still stuck with Genius offering the same apps to me. Mind you, once I click on the App Store there is nothing I can do but swipe left and right. There's absolutely nothing at the bottom of the screen like a features tab, nothing. There is, however, a categories button at the top, but that's it. Irrelevant.
FWIW, I just got off the phone with Apple technical support about this. I use Genuis for creating playlists, so I don't want to disable it, but Apple support confirmed that there is no way to avoid syncing Genius data without disabling Genius altogether. I'd read somewhere else that subscribing to iTunes Match might allow you to avoid this, but that is NOT the case, as I've confirmed, and Apple support has confirmed. For me, it routinely syncs thousands genius of items, so I have to allow a lot of time for my manual syncs.
-
My Iphone doesnt start normally it turns on, shows the apple logo and then turns off again but only while its charging. Before it turned on completely and i saw the charging tag that it was chraging normall but then it turned off again? I have tried totall reset nothing works! Im lost please help!
Try this to help
http://support.apple.com/kb/HT1808 -
My ipad is flat and when I plug it in to charge it just repeatedly turns on and then turns off but isn't charging. I tried to plug into itunes but it just goes through the same ritual and can't maintain connection to itunes. What should I do ?
1. Reset iPad
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush -
Hi, I have installed VMware Fusion to switch between Mac and Windows. It worked fine until I installed and played a game (Atlantis). Now the screen in frozen and even turning off the computer does not help. Does anybody have an idea what to do?
Try the remaining items of:
iOS: Not responding or does not turn on
If not successful, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Hold alt or option key at bootup, do asny boot choices show up? -
my iPod touch 2nd generation keeps turning the volume up and then turns off by itself randomly. Please help!
Try the standard fixes in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod
- Make an appointment at the Genius Bar of an Apple store. -
Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
activated voice over and then turned off my ipod,now it wont let me type in my passcode to get back into my ipod. Help?
The screen is telling you to connect the iPod to your computer and restore via iTunes. You may have to also place the iPod in recovery mode in ordrer to allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
For information see:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
My iphone was updating to IOS6 from IOS5, then I thought by turning off my iphone it will cancel the update. It did, but now it keeps turning on but not compleely only until the apple sign shows up then turns off. Help please!
You will have to try putting it in DFU mode and allowing it to update. Once it has begun, you can't stop it.
-
New shuffle plays for about 15 seconds and then turns off even through it's charged
brand new shuffle plays for about 15 seconds and then turns off even through it's charged. 3rd one I've had that does this
Double check to make sure the headphones are plugged ALL the way in, meaning no silver can still be seen from the headphone's plug.
B-rock
Maybe you are looking for
-
BADI for changing product catgory
Hello SRM Experts, I am looking for an BADI for changing product category. We use classic scenario with an external catalog. Our supplier delievers us some data. Some of this data are used for statitical reason for example new item matgroup from oci
-
My screen will not roate when I am face timing.
My screen will not roate when I am on facetime or gaming. Someone suggested that the roate is locked to on. Anyone know where this setting is?
-
for those of you who know it, and those of you who don't http://www.lowagie.com/iText/ I'm using the graphics2D interface DefaultFontMapper mapper = new DefaultFontMapper(); mapper.insertDirectory("c:\\winnt\\fonts");
-
Cannot make a readable .pdf Separation (Screen Printing) Please Help
I am unable to save .pdf versions of color separations. I followed the tutorials (changed all colors to cmyk or spot colors, selected the printer adobe post script, changed the output to Separations (host-based), desected the colors I didn't want on
-
Is it possible to move or merge my local user account with an Active Directory account?
10.7.2 update now allows me to authenticate against AD, and I have a shiny new account on my mac. Is there any way to merge my local and AD accounts? Or link my local account to my AD account? Can I change the home directory of the AD account to po