HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

Similar Messages

  • When I connected my sony mp3 player to iMac for first time all music deleted.  why?  and can I retrieve it?

    When I connected my sony mp3 player to mac for first time, all music deleted.  Why?  and where did it go?  Can I retrieve it?

    carol1963 wrote:
    When I connected my sony mp3 player to mac for first time, all music deleted.  Why?  and where did it go? 
    No idea.
    Can I retrieve it?
    Restore from your most current backup.

  • Getting error 36331 while running prebuilt  etl for  first  time

    Hi all,
    I have installed BI apps 7.9.6 and OBIEE 10.1.3.4.1, DAC 10.13.4.1 on a Linux machine with Oracle 10gR2 as data base and EBS 11 i as the data source. I am running the prebuilt ETL for the first time for a new execution plan created with Financials-Receivables subject area added to it. Of the total 292 tasks 30 tasks run well and the ETL fails after that with the following error.
    The following error message is from the DAC server log. I have seen the session logs and workflow logs for the SDE_ORA_CodeDimension_Supplier_Payment_Method task, but could figure out what could be the issue. Please let me know if any one has encountered the same issue.
    =====================================
    ERROR OUTPUT
    =====================================
    524 SEVERE Tue Sep 22 06:41:14 EDT 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Supplier_Payment_Method
    525 SEVERE Tue Sep 22 06:41:14 EDT 2009
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Supplier_Payment_Method
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    Thx
    RM

    Found that the indices on tables are failing to be created while running the workflow. I have updated the status of the task as completed and re queued the task. ETL ran successfully then.

  • I try to overcloack for first time...can you help??

    Hello Everybody
    I bought my system a year ago,and  I start it to be more confident on the pc so I ve decided to try to overcloack ....
    I used core centre...i reached around 3.2 (from 2.6) and invariably the system crashes.
    Can anybody help this poor guy,that knows little about PC`s???
    And /or maybe i set up the hardware in a bad way???
    I hope somebody will understand my english(I`m Italian) and help....
    I thank  you all
    MS-6728 P4 DDR S478 865PE Neo2-FIS2R Motherboard  BIOS Version/Date   American Megatrends Inc. V1.5, 08/09/2003
    Pentium 4 2.6GHz 800 Processor FPGA (on system info is displayed that i have 2processors...dont know why)
    400W PSU for ATX PC Case
    512Mb PC2700 184pin DDR DIMM Memory (u reccommend 400 mhz?)cpu-z tells me that frequency is 159.6 mhz and performance mode...disabled)
    256MB ATI Radeon 9200DVI DDR Tv Out
    2x 120Gb 180GXP 7200rpm ATA 8mb Cache Hard Drive (2ghether on the onboard raid promise)

    Overclocking is not an exact science. It depends heavily on many factors including motherboard, RAM, an dthe CPU. Off the bat i can tell you that you probably won't get very far with PC2700. To get even a small OC you need some decent quality PC3200. but then, its only rated at 400Mhz so your not going to get much over 430Mhz on it. If you really want to OC, you need some faster PC3700 (DDR433) or DDR500 (PC4000). Even then, it is difficult to achieve a stable overclock because of the other two factors, how far you can push the CPU and Motherboard. It is essentially a trial and error process. Push the FSB up a couple points and see if it's stable, then back of a bit when the machine crashes. A good tool to use is Memtest86+, which will test your memory for any errors while overclocked. You can download it here.

  • My refurbished iPad 3 charged for first time it and charger got very hot is that normal

    just replaced my refurbished iPad 3 with another.  Tried to charge it for first time.  Noticed it got very hot and so did charger.  I don't recall my other iPad doing this  is this a defect in the ipad?

    Define "hot".
    If fully drained both the battery (that essentially fills up most of the body of the device) and the charger will get quite warm, though not unbearable. Time to charge will vary according to device: my iPad 4 takes about 6 hours if almost flat, but takes about 40 min if at 75%.
    Be sure to use ONLY its original charger OR chargers that are rated for iPads. They draw twice the current as phones and will cause phone chargers to get much warmer than usual.

  • How do I activate factory unlocked iphone 5 for  first time

    How do I activate factory unlocked iphone 5 for  first time?Should i connect to itunes?Or should I put the sim first and then ON the device?Pls help me

    Yes.
    Insert the SIM card and power the iPhone on to find out. Nothing bad can happen if you can't and if you can't for some reason, connect the iPhone to iTunes.

  • SQL Server Management Studio - Configuring the environment for first time use

    Hi
    I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
    When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
    Management Studio  them loads and I can continue without problem.
    I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
    Thanks

    Hi,
    There is bug report of this issue:
    http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
    "SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
    and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
    if any of these files are not available or unusable, SSMSE will generate new ones."
    Hope this helps.
    BR,
    JoukoK

  • I've bought my ipod touch 1 week ago,battery drained I charge it,then when I check either it is fully charge it won't turn on at all.PLEASE HELP ME.

    I've bought my ipod touch 1 week ago,battery drained I charge it,then when I check either it is fully charge it won't turn on at all.I already tried pressing the home and wake button several time and it wont work at allPLEASE HELP ME.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Just bought a second hand iPod Touch 32GB 4th Gen. The IOS is currently 4.3.5 and when I try to update to the latest, the connection continually times out. Can you help?

    Hi All,
    First ever post on here but I feel that my options are slowly running out. I've just bought a second hand iPod Touch 32GB 4th Gen. It was reset to factory settings meaning that that software was 4.3.5
    As soon as I plug it into iTunes it asks me to update to the latest version. I click for it to go ahead but the connection times out (error code 3259)
    I've been on the phone to apple for over an hour and we still couldn't resolve the issue. We tried disabling the firewall, uninstalling AVG, diabling pop up blockers, checking the LAN settings, disabling the router security and anything else we could think of.
    We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
    Has anyone got any ideas?

    You said:
    We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
    Just what did yo do to gt iTunes to see the download:

  • Hi My grandparents just bought an iPod Touch for me from Dubai, UAE. I can't see any facetime on the home screen nor in the settings. I've read that it's not possible. But is it possible if I get my OS updated again from India?

    Hi My grandparents just bought an iPod Touch for me from Dubai, UAE. I can't see any facetime on the home screen nor in the settings. I've read that it's not possible. But is it possible if I get my OS updated again from India?

    There is no way you can activate Facetime on an iPod touch purchased in the UAE. The government there required Apple to lock off Facetime at the hardware level and there's no way to unlock it. Reinstalling iOS, regardless of country, will not help. If you want Facetime, you will need to sell your UAE-version iPod and buy one there in India.
    Regards.

  • I recently bought 2 ipod touches and sometimes the video camera locks up. is this from not enough charge or does anyone else have this problem?

    i recntly bought 2 ipod touches and they both seem to lock up in video mode and i was wondering if anyone else has had this problem?  is it due to low battery?

    It happens sometimes. Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that points to a hardare problem and an appointment at the Genius Bar is in order.

  • Wall and/or Car charging iPod Touch 32GB with cell phone/other USB charger

    I know the "stock" answer is to buy an iPod compatible charger for my $300 device, but while traveling, it's nice to pack less gadget chargers and more gadgets
    Can I safely charge my iPod Touch with my LG Phone charger ("5.1V - .07A" output)?
    I also have a wall charger for my Flip Video ("+5VDC, 1A(5W)")
    Does anyone have the specs for an Apple brand iPod Touch 32GB charger?
    Thanks!!

    My experience is that you just have to try 3rd party USB chargers. Some work, some don't, and it doesn't appear to just be the power specs. I had a 3rd party charger that ran my iPod 5G video just fine, but didn't work on my Touch 32GB (1st gen). My Apple charger is 5 volts/1 Ampere, as is my Kensington that also works.
    You might mention what generation your IPT 32GB is, in case someone knows of some difference.

  • I bought a ipod touch 4g. it worked realy well on the first two weeks, but them it stoped to turn sideways, and i dont know why! i have checked if the portrait orientation was locked, i tried to turn of and on,shuting down and restoring.but nothing works!

    i bought a ipod touch 4g. it worked realy well on the first two weeks, but them it stoped to turn sideways, and i dont know why! i have checked if the portrait orientation was locked, i tried to turn of and on,shuting down and restoring.but nothing works! Can someone help me i dont know more what to do!!!!.
    And this doesn't let whatch to youtube, videos, typing sideways, playns games tha need the acelerometer.......

    What happens when you try to restore the iPod? Error message?
    If this program will not get the iPod out of recovery mode your data should be safe.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • I have recently bought an iPod touch 4th generation. The first day I could connect to the app store from my iPod and download what I wanted then today every time I try downloading something a message pops up saying " cannot connect to the iTunes store" y

    I just bought An iPod touch 4th generation yesterday, it was working fine I could
    Download appl from the store from my iPod without a problem . Today however every time I try downloading something from my iPod touch
    it. Doesn't download a message pops up saying " cannot connect to iTunes store" why? I am connected to the Internet and I can easily go on safari and google with. NO problem but everytime I go on the app store it gives me that message can you please help? My iPod isup to date and so is iTunes I so tried bar restarting my iPod and it worked for about 2 minutes the the message kept popping up Again please help me . Thank you

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    If your iPod is defective and not abused Apple will exchange it at no cost.
    Apple Retail Store - Genius Bar

  • Bought my ipod touch 4g from apple's official reseller on 21st November 2012. Purchase slip says warranty ends on 20th November 2013. But apple website says its 19th November 2013. Why? I went out of the store once while buying, was the ipod exchanged?

    Bought my ipod touch 4g from apple's official reseller on 21st November 2012. Purchase slip says warranty ends on 20th November 2013. But apple website says its 19th November 2013 when I put in my ipod's serial number. Why is that? When I bought the ipod, the salesman told me that the latest ios is not installed, so I typed in my apple id and passowrd  and opened the ipod, then they started donwloading the latest ios. During the download, I went out of the store for sometime, then i got back after 10 minutes and had to put my id/password again to begin with the new ios. Was my ipod exchange within this time? Why in a computerized system, If  I have bought an ipod on 21st November 2012, it says the warranty expires on 19th Novembner 2013? Pleasse help, my ipoid even had some scratch on the backside when I first  checked the back side after bringing it home from the store.

    Was my ipod exchange within this time?
    Not unless it was found to be defective, and that would not reset the warranty on the original serial number.
    Why in a computerized system, If  I have bought an ipod on 21st November 2012, it says the warranty expires on 19th Novembner 2013?
    Sometimes it's just wrong. Perhaps the reseller entered in the sales date incorrectly. Call Apple support and discuss the problem with them. They may ask you to fax them a copy of your receipt.
    my ipoid even had some scratch on the backside when I first  checked the back side after bringing it home from the store.
    You'll probably have difficulty convincing them that the scratch wasn't there when you brought it in, but you can go back to the store and talk to them about it.
    Regards

Maybe you are looking for

  • Confirm / Fulfill Open Qty pulling in partial quantity in sales order

    Hello all,     The inventory for item AA is 83.5 case for batch 123A.   In the sales order i create, for item AA with Order Qty of 83 cases, it pull in from batch 123A, confirming 83 cases.   Next line item AA, i need another 1 case. It goes to anoth

  • XML file not taking transitions in FCP

    I imported film into the only way I know how, through iMovie. I then exported it out as an XML file then into FCP. Started editing only to see none of the transitions I'd place between clips is staying. It just has a 'red X' come up when I am trying

  • Can't save....

    guys....i am running a mini (LION) , power mac (Leopard), MBW(M/Lion) and a Windows 7.....all of these machnes (except for the mini &MBW)  are coneccted via an ethernet cable to a router. The router has an exeternal drive connected to it....which i u

  • GPIB-USB libraries that need to be included with Installer

    Hi, I need to make a small application executable, and the application needs to communicate with a power supply over a GPIB-USB-B connection. MAX can communicate with the power supply on this PC, and the second PC that I have my Base LabVIEW 7.1 inst

  • Question on parallel processing using the STARTING NEW TASK keyword

    I have the following code in a program on my development system: call function 'FUNCTION_NAME'     starting new task ld_taskname     performing collect_output on end of task       exporting         pd_param1       = ld_param1       tables         pt_