HT1515 Can I use AirPort Express product to add a wi fi outlet to my ethernet Lan?

Can I use an Airport Express to add a wif fi outlet to my etehrnet (wired) Lan ... I don't have wi fi!

This should work if you configure the AirPort Express to create a wireless network....the same type of setup that you would use for example, if the Express was connecting to the Ethernet jack in a hotel room.
However, should work does not mean to imply that it will work.
Here, I am assuming that the "main" router on the Ethernet LAN network has been configured to allow another router to connect to the network.

Similar Messages

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • Can I use AirPort Express as booster/extender to LinkSys router signal?

    I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room.  Can I use AirPort Express as a booster/extender?  Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys.  Which is it?  I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
    I've been hassling with this for over a month, and I'm extremely frustrated. 
    Thanks to anybody who can help me with this.

    Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

  • Can I use airport express to extend my network AND stream iTunes???

    I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
    My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
    Thanks!

    Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
    If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

  • Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

    Hi I was wondering :
    Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • Can I use Airport Express with iPhone in my hotel room?

    Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

    I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

  • Can I use airport express in a wired network to play music through my stereo?

    I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater.  This works, but there are some good days and some bad days where there are dropouts in the music.  I have recently run Cat6 cable to my HT from my router next to my MacPro.  This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc.  I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch.  I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE.  Is there a way to force the wifi on the AE off and just have it for streaming from iTunes?  Thanks.

    Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

  • I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

    I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
    is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

    Apple calls this configuration a ProxySTA.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can't use Airport Express after upgrading to Leopard

    I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
    I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
    I am open to suggestions to try a few things to get it working, so any help is appreciated.
    Message was edited by: a j

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • Can I use airport express with my osx 10.3.9

    I have osx 10.3.9 and would like to upgrade to to lion maybe and use airport express if possible .....what do I need to do?
    Oneday26

    So we know more about it...
    At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

  • Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

    I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    The printer connects to the Airport Express through a USB hub and is recognized.  I cannot get the scanner nor either of the back up drives to be recognized.  Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro?  If it is possible, can you walk me through the set up for each? 
    Thanks,
    Doug Earle

    I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
    It will not work with a scanner, copier, or hard drive.
    It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
    The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
    But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

  • Can I use Airport Express (1st gen.) as a wired access point to my wifi Network

    Guys
    I'm using 10.8.4 with the older 6.3 airport utility. I have a Airport Express A1084 (1st. Gen).
    I'm trying to use it, connected to my wireless network, but have a wired ethernet cable from the Airport Express connected to a device. I tried connecting via wire to another laptop to access the web and it doesn't work.
    Any ideas if I can even do this, or do I just buy a new Express Airport. I just want to extend the network using my wireless to a wired device, but don't want to run a cable, because of the distance.
    Thank you
    John

    Bob, I hope you can help me too.  I have 4th generation (? - the flat, square model that was recently replaced) Time Capsule/Airport that I bought to extend my Verizon DSL dry loop modem/wireless signal througout the house and to the guest house.  I now know that it cannot be achieved due to Apple negligence in informing customers that the capsule will only extend from another apple airport product. 
    My question:
    Should I connect it via ethernet to my DSL modem and create a new network, but use the SAME network name, passcodes, etc?  Will that Strengthen my existing wireless signal or will both machines butt heads and duke it out, so to speak?
    B/C, I did have two separate networks going for about a year, different names for each network, and suddenly, the wireless part of the Verizon DSL modem died, and Verizon replaced the entire modem with the Actiontec modem.  So I am concerned that reconnecting the Time Capsule/Airport may damage teh Verizon modem, if that is why just the wireless part of the previous modem failed. 
    Suffice it to say, am very disappointed in the Time Capsule/Airport.  It replaced an older, bigger Western Digital external hard drive that was so easy to use and reliable; am still using it, but it has no wireless signal boost capability, so I purchased the Time Capsule/Airport. 
    Thank you for your help.

  • Can I use Airport Express as a Wifi Extender?

    Forgive my ignorance, but I just swithed to all Apple products a few months ago and I have a question about the airport express.
    We currently have one airport extreme base station set up in our house. The only problem is that the g signal for my iPhone won't reach quite far enough to get to the third floor (its a very long and tall home).
    I was wondering if you can use the Airport express as a wifi extender with no cords plugged into it, similar to the linksys extenders you can buy that extend the signal range.

    LukeW, welcome to the discussions!
    Yes, an AirPort Express could be used with your Extreme to "extend" the wireless network created by the Extreme. I assume here that you have an "n" capable Extreme.
    If you have an older 'g" Extreme, the Express could be used to "participate in a WDS" (wireless distribution system), which is a similar setup.
    It will probably take some experimenting to find the best position for the Express (you want it to receive as strong a signal as possible and "extend", so a good starting point would be to place the Express at a point that was roughly half way between the Extreme and the area that needs more wireless signal.

Maybe you are looking for