HT1535 When I plug my ipad into the computer to sync a message pops up saying it can not sync because there is not enough memory in the itunes library. Do I need to increase the memory in my itunes library and how?

When I plug my ipad into the computer to sync a message pops up saying that the ipad can not sync because there is not enough memory on the itunes library. Do I need to increase the itunes library memory and how do I do this, or do I just need to trasnfer things out of itunes? Thanks.

Try
iOS: Device not recognized in iTunes for Windows
I would start with              
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or              
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Similar Messages

  • When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes.

    When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes...Help???

    Check for Update (tap to enlarge image)

  • When you plug your ipad into your computer is it meant to charge?

    When you plug your ipad into your computer is it meant to charge ?

    Not necessarily...
    iPad Charging
    "The fastest way to charge your iPad is with the included USB Power Adapter.
    iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
    When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

  • When I plug my ipad into my computer nothing happens

    I have the ipad 2 and I cnat sync it to my computer.
    I have the latest update of itunes and nothing happens when I plug it in
    How can I sync my music and make the computer recognise it?
    Thank you

    Keep in mind, the new iTunes is in a different format.  To revert to a more familiar format:
    In the top menu bar in iTunes, select
    1.  View
    2.  Show sidebar
    Is the device now on the more familiar left hand pane or still not recognized?
    iOS device not recognized by iTunes (Mac) - http://support.apple.com/kb/TS1591.
    iOS device not recognized by iTunes (Windows) - http://support.apple.com/kb/TS1538.

  • HT201210 Trying to restore a new iphone 4 to files from an iphone 3, however, the restore says it can't complete because there isn't enough space.  I would like to delete photos and music files.  How can I delete these photos?

    After doing the initial restore function, I'm trying to delete phots from the system.  The itures instructions says to click the photos button the unselect photos or albums, but see no photos button.  How can I delete the photos to gain some storage space?

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • Plug my ipad into my computer it pulls up my windows 8 libraries instead of itunes how can i fix this, plug my ipad into my computer it pulls up my windows 8 libraries instead of itunes how can i fix this

    when i plug my ipad into my computer it pulls up my windows 8 libraries instead of itunes i know this is probably something simple to fix but it is driving me insane, so please help me, thank you.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • When i plug my ipad into computer it says i need to update to itunes version 10.6.3

    when i plug my ipad into computer it says i need to update to itunes version 10.6.3

    iTunes 10.6.3 download http://support.apple.com/kb/DL1575
    It's for your Mac or PC, not your iPad.
     Cheers, Tom

  • When I plug my iPad into my laptop it doesn't pick it up on iTunes?

    When I plug my iPad into my laptop it doesn't pick it up on iTunes?

    You did not state what OS you are running ... so for Windows
    iOS: Device not recognized in iTunes for Windows - Support - Apple
    For Mac OS X
    iOS: Device not recognized in iTunes for Mac OS X - Support - Apple
    Only for Mac OSX 10.6
    Mac OS X v10.6: iOS device not recognized in iTunes after restart

  • When I plug my iPad into a wall circuit and leave it for 18 hours the battery level only goes from 55% to 66% and then it quotes charging. Is this normal or do I have trouble with my adapter, it is the one that came with the iPad?

    When I plug my Ipad into a wall circut it will not fully charge, It only charges up to 66% does anyone no why?

    I can't tell you why it is doing this but it should not take anywhere near that long to recharge.
    Try another power adapter if you have access to one - borrow one from a friend, try another wall socket, another cable ... take it to an Apple Store and let them try to charge it for you.
    You can try resetting the iPad and see if that helps but I have my doubts - but it will not hurt anything either.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Your battery gauge may be giving you an incorrect reading - but I think that would be a long shot as well. How many hours of use do you get at 66%?
    You can read this about the iPad battery and how to maintain and care for the battery. .
    http://www.apple.com/batteries/ipad.html
    This copied from the site
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Message was edited by: Demo

  • When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore?

    When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.

    This is a post from a user named edgar999 and it worked PERFECTLY:
    "OK - this is how it works:
    In order to backup from iCloud you cannot use iTunes!
    Therefore disconnect your device from your computer.
    Turn on your device and go to Settings and then go to General.
    At the bottom of this submenu there is a buttom "Reset"
    If you push that buttom you see 6 different Erase settings to chose from!
    Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud!  (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
    Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
    After choosing your location you will be asked to setup your WiFi-conection. After  you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
    Restoring from a backup can take some time.  The process uses your Wi-Fi connection to download settings, content and data.  If you had a lot of content on your device, this can take a while.  The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad.  When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
    If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
    THANK YOU edgar999!!!!

  • HT1386 I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.

    I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.

    Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

  • When I plug my iPad into my Mac it will not sync

    When I plug my iPad into my Mac it will not sync and my iPad will not charge. I've used every chord that I own. In addition, I've plug other things into my Mac and they work fine. If I plug my iPad into the wall it charges.

    Then it doesn't seem like its the cable then does it.
    If the iPad isn't being recognized in iTunes, you can start with something very simple. Quit iTunes, reboot your iPad, restart your Mac and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If it still isn't being seen by iTunes, look for help here.
    http://support.apple.com/kb/TS1591
    Or here.
    http://support.apple.com/kb/TS3540

  • When I plug my iphone into my computer to connect to itunes so i can sync my music to it, it doesnt show up.  Or at least I cant find it.  Why?

    When I plug my iphone into my computer to connect to itunes so i can sync my music to it, it doesnt show up.  Or at least I cant find it.  Why?

    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    try this

  • When I plug my ipod into my computer, the computer dosnt read it and I get a messege saying the USB device is drawing to much power. How do I solve this problem?

    When I plug my ipod into my computer the computer dosnt read it and I get a messege saying that the device is drawing to much power. How do I solve this problem???

    I had the same problem with mine when I connect the ipod when it's full charged and turn on. The problem never happen when the ipod is charging or i'ts full charged and it's turn off. So just turn off your ipod down and connect to your mac again.

  • I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

Maybe you are looking for

  • Using null in CASE statements

    Hi, I have query with a case statement as follows: SELECT * FROM table WHERE CASE WHEN :variable like 'A' THEN column END is null WHEN :variable like 'B' THEN column END is not null; This works fine when returning "column is null" but not when "colum

  • How can I stop and delete a download?

    How can I stop and delete a download? Bought a TV episode - it came with both the HD and standard version. Only want the standard. Can't get the HD version to clear from my available downloads. Help!??!?

  • EMAIL problem after installing 10.10.2

    I noticed that an email I sent out last night (through gmail) had not gone out.  I also noticed that one of my emails had an image that wouldn't download.  The email was there, but not the image.  I got the circle, and eventually a timeout notice.  I

  • While in bridge when tools PS batch - nothing happens

    i batch edit ALL the time - did it just last night & now is not working. i have CS4 for Bridge and PS. when in bridge going to tools>photoshop>batch, usually PS pops up and then has the 'batch' window where you can select which preset you want to run

  • Secondary c. elem. does not exist

    Dear Gurus, While creating the cost elements, i am getting this error msg. G/L account XXXXX exists. Secondary c. elem. does not exist Message no. KS035 regards