HT1595 how do i access apple tv when screen is stuck at setting date and time

how do i access apple tv when screen is stuck at setting date and time, have unplugged system,restarted router....

Welcome to the Apple community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Similar Messages

  • HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    I just went through this last night. (Aug 15, 2013)
    What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
    Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
    Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
    Power both items back up.
    At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing.  But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
    A new issue that is was able to fix after a good nights sleep.
    I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
    Once I typed out my full ID and PW. everything is back to 100%

  • HT1595 Stuck on Setting Date and Time

    Will not set Date and Time (just keeps trying).

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

  • Apple Tv is stuck on setting date and time.

    I have my Apple Tv hooked up to my cellular network and it won't go passed the setting date and time screen. any ideas why it's not working?

    Welcome to the Apple Community.
    I don't have an answer to your specific question but trying to use the Apple TV with a cellular connection is not advisable, you will use up your monthly allowance in minutes.

  • My apple TV stuck on setting date and time.

    Tried to fix it with all the options you gave me on forum. Turned off, turned on, changed router, changed router settings and security level, even changed the ATV. Nothing works. Last week everything was fine. What should I do?

    Stuck on Setting Date and Time

  • I plug the Apple TV in and it just says setting date and time.

    When I plug the Apple TV in it just starts up setting date and time. Tried unplugging  it and resetting using the remote but it is unresponsive

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • The apple tv is stocked at setting date and time

    I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?

    http://appletv2.com/stuck-on-setting-date-and-time-fix/

  • All of a sudden my ATV came up with a message stating trying to set dat and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

    All of a sudden my ATV came up with a message stating trying to set date and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

    Welcome to the Apple Community.
    It's not related to any hacking.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router.
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • HT1551 When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

    When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

    Were any of the troubleshooting steps in the article from which the question was posted tried?

  • How to set date and time on apple tv

    how to set date and time on apple tv

    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • How do I set date and time on apple tv?

    How do I set date and time on apple tv?

    Fixed the same problem, STEPS
    1. Reset your apple TV
    2.It will again stuck on that setting, ignore it by press menu
    3. Unplug ethernet wire
    4. Try to connect with wifi, it should be work with wifi connection as mine.
    5. Then you can switch back Ethernet wire after get fixed.
    Thanks. Lemme know dude if it's work.

  • Automatically Setting Date and Time - How often does it occur?

    Can anyone tell me exactly when Mac OS X retrieves the date and time from Apple's time server? Quite often, the time on my Mac is several seconds out from the correct time. When I open the "Date and Time Preferences", it seems to sync up with the correct time and everything is good.
    Is there any way to schedule when Mac OS X automatically sets the time, or how frequently over the course of a day it sets the time? Or, alternatively, does anyone know of a utility that I can use to accomplish this?
    Thanks in advance for any help you can give me.
    iMac 1.83 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    Hi Barry,
    Thanks for your reply.
    I have a wristwatch that receives a radio signal which transmits the correct date and time from an atomic clock in Fort Boulder, Colorado. The watch automatically picks up this signal three times a day (in the early morning so as to get the correct time once we go on/off DST) and sets my watch to it. So my watch is always accurate (so long as it can receive this signal). I have an alarm clock that uses the same principle. It's actually kinda nice...I can look at my watch and KNOW I have the right time!
    At any rate, that's how I know my Mac's clock is out a few seconds...I just check it to my watch.
    The real reason I would like to be able to schedule this function (or, at least have it occur more often) is so my Palm TX gets the correct time from my Mac each morning. I automatically sync it to my Mac every morning, and one of the conduits actually synchronizes the Palm clock to the one on my Mac.
    I'm just curious to find out when exactly Mac OS X sets the clock. Does it happen once a day? Once a week? I haven't had my Mac for all that long, so I do not know what will happen when we go off DST this spring. Will OS X (based on the date) just bump up its clock by one hour, or will it actually get the correct time from Apple's time server and sync the Mac clock to it?
    And, if there's no way the change when this happens or the frequency with which it occurs, is there anyone out there who has written a utility which can do this?
    What about Automator? I'm new to the Mac world, so I am just learning about all this stuff. When I open the Date and Time System Preferences, the clock seems to sync up at that point. Could I use Automator to do this?
    As always, any help would be most appreciated.
    Thanks again for your reply, Barry!

  • Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    . Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT1595 My AppleTV seems to be stuck on the "Setting Date and Time" load page

    I just moved from a house to an apartment and when I hooked up my appleTV it said "Setting date and time" with a spinning load wheel and it's been doing this for a long time now. I hit MENU on the remote and tried going to Settings> General> Network like it said at the bottom of the screen, but nothing happened. It's connected to the right WiFi network, but the only icons it shows on the home screen are the 'Computers' icon (for Home Sharing) and the 'Settings' icon. My movies, music, tv shows, netflix etc. icons aren't showing up. I restarted it and got as far as the "Setting date and time" load page again, where it just sits and loads.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • How do I have photos in iPhoto display on their face the date and time?

    How do I have photos in iPhoto display on their face the date and time? Displaying in the camera shows this. When I check edit the info is there. How do I have that displayed on the face of the photo when I view it in iPhoto?

    How do I have photos in iPhoto display on their face
    the date and time? Displaying in the camera shows
    this. When I check edit the info is there. How do I
    have that displayed on the face of the photo when I
    view it in iPhoto?
    Hi! My name is Tom from San Diego, CA. I have the exact same question as you. That is, I would like to be able to print out a photo from iphoto with the date that picture was taken displayed on the face of it. In this way, someone looking at that picture in a photo album years later would know when it was taken. Did you ever find a method to print copies of photos out of iphoto with the date displayed on the print? Thanks for your help!

Maybe you are looking for

  • Sum function within if/then/else (xdofx:if)

    I'm attempting to display a total at a particular group within my report. This total is conditional and should choose to display a placeholder value or the sum of another placeholder value (in a child group). I have been able to vary my output based

  • Creation of Assets master Data

    Dear All, Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ?  In UNBW mat type there is no sales views maintained.

  • Clearing the stage

    Hi, using the code below, i've created a basic drag and drop question and answer, where the user can drag the correct answer into the question box. However when moving to the next slide any objects moved on slide 2 remain on slide 2. I've tried remov

  • Problem with JCA program

    Hello all, Im trying to modify the JCA program from SAP to get details from SALESORDER_GETLIST BAPI. But im getting some errors. Please help me out. In the next two consecutive replies im posting the java code and the jsp code. thnx Steve

  • I have several 'app updates' on my iPad waiting to be updated, but the update screen is blank. Why? Day 2

    I have several ' app updates' on my iPad waiting to be updated, but the update screen is blank. Why? Day 2