HT1595 Setting date and time is going around and around
Hello could someone help me?
Hey maradi, have you figured out the issue? I'm having the same EXACT problem!!!
Similar Messages
-
Date and time keeps going missing!
Hi everybody, my date and time keeps going missing from the top bar every time I turn on my mac - sometimes other things go missing, like the airport status.
It used to happen just once a fortnight but after I installed the latest security update, it seems to be happening every time. Does anybody have a reason/fix? Would be much appreciated. Thankyou!Hi appleoclock, and a warm welcome to the forums!
Not sure this works since that Qursical update, but the cure for that used to be...
Apple Menu Bar Icons Gone
You've probably got a couple of corrupt preference files.
In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them). -
Screen keeps saying Setting date and time, tried to reset and or restart still won't reset
Screen keeps saying Setting date and time, tried to restart and reset but does not work,did follow direstions unplugging apple TV still not resetting/restarting, any help?
Aha! A bit more searching and I found the answer that just fixed it for me.
Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
Let them go....
Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
This enabled my apple tv to once again respond and get off the "setting time and date" screen.
Hope it works for you. -
Can't get my appletv to go pass setting date an time , and won't restore
My Apple TV won't restore or get passed the setting date an time
What c an I do or try ???Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
CarolThe first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)
Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini -
This started a week ago, I turned off my ipod, and it could not be turned back on again. So I held the sleep button and the home button simultaneously for ten seconds, and my iPod responded, the logo appeared. And my iPod worked perfectly for a week, when the same problem appeared last night, I tried to use the tip which I used last week. But a new problem appeared. The logo showed up, and when I tried to type in my password, the logo appear on the screen again, and this just goes back and forth. I can't type in my password. This is driving me crazy, Pleeeeaze, someone please help me!!!!
Have you tried connecting the iPod to your computer and restoring the iPod?
-
I try to access the itunes store and my bar goes halfway and stop. Please help
I am trying to access the Itunes Store and my bar goes halfway and stop.
Please help.Is it endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?
-
Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?
Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy -
Everytime i click on i tunes it won't work ! The blue circle comes up for 2 seconds and then it goes out and my i tunes still doesn't come up. I have windows 8 and it was working when i first downloaded it which was a month ago, but now its not. I need the problem fixed any suggestions ?
I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance -
my phone is turning itself off and back on, will only stay on for 2 min til it turns itself back off and this just goes on and on, do i need to replace it??
Sounds like a trip to the Apple Store is in order....
Cheers,
GB -
HT1595 setting date and time on apple tv
Cannot set network date and time using apple tv
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
I cannot get the Apple TV to move past the date and time issue. We have had it over a year and never had this problem. We have restarted both the Apple TV and the wireless router. Internet is working on all other devices. Help!
Hey maradi, have you figured out the issue? I'm having the same EXACT problem!!!
-
Is there any definitive info on this subject?
When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection. Is your router still working, is the Internet for all the other computers on the same network working? Have you tried changing from WiFi connection to Ethernet or vice versa?
-
Hello:
When I tried to configure my new Apple TV for some reason it kept trying to set the date and time automatically but wasn't able to. I tried to do it manually but couldn't do it either. When I tried to skip this part and log into my iTunes account it said I had to set the date and time first. So it seems like I'm stuck in this loop. Any hints?
Ricardo OrtizAssuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
I have an Ipad 2 /. Everytime a push the bottom to turn it in the screem shows the time for a second and the screem goes black again
what can I do ??Are you sure it's charged?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
Column Formula with Error in OBIEE 11g
Hello, On Oracle Business Intelligence Enterprise Edition 11g, I am trying to create an analysis. The database is MySQL. In the database, there is a field of type varchar(10). This field shows a date. In OBIEE 11g, when creating the analysis, in the
-
Image Filename - Relative Location
Hi, I am a pretty new programmer, and ran into a situation where I feel pretty stuck. I have a program that involves putting an image on the screen. Currently, I have a static filename: "C:/Program Files..." I want to be able to move a folder with my
-
Enabling sold to party and ship to party on Sale order creation....
Friends, When i start creating a sale order, 1 .Iin Sale order screen the sold to party and ship to party are in the disable mode, i could not able to enter any value...how to make it to enable... 2. but allowing me to enter the item and qty, and a
-
Edit an Excel file in Numbers '09 and save to Excel
When I open an excel file with numbers and then make a change, I can't simply save the file by pressing command-s because that brings up the "saving as" dialog. Is there a reason why this is happening? Can't Numbers just overwrite the existing excel
-
Im really disappointed that I can't watch any tv shows due to the flash issue....are there any apps that help?