HT1655 i have my 2nd generation ipod shuffle and i have had it for about 2 years now. I have fully charged it and it still wont play. i have tried everything what should i do?

what should i do?

I don't know what "everything" is, unless you state them, so I have to ask if you did this procedure to reset the iPod shuffle.
http://support.apple.com/kb/HT1655
If that does not help, is the iPod recognized by iTunes when it is connected to USB?  If so, select the iPod in the iTunes sidebar (under DEVICES).  Over to the right, go to the Settings screen.  There should be a Restore button there.  Restore will erase the iPod, install the latest software, and give it the default settings.  After it completes, load some songs on it and try it again.  Hopefully, it will play now.
If that does not help either, please post back.

Similar Messages

  • PLEASE IGNORE LAST QUESTION RE:  2nd Generation IPod Shuffle Connection

    Let's try that again. I currenty have a 2nd generation ipod shuffle that works on my laptop just fine...most of the time. My roomate, however, is having a lot of problems trying to get her's to work on her desktop pc. I need to know if she can use my laptop with her IPod Shuffle as well. I think she can, I just do not have a clue how to do it. Any help with step by step instruction would be great! Normally I Know just about everything with Windows. This one has me confused. PLEASE HELP!!!!!!!!

    You select one or more songs in the Music library. Then you click-hold-drag the song(s) and drop onto the shuffle under DEVICES. If you don't see the shuffle under DEVICES, click the little triangle to drop down the list.
    The easier way to put songs onto the shuffle is create a new Playlist. Name it "shuffle songs" or whatever you want. Put the songs you want on your shuffle into this playlist. Then connect your shuffle, go to the shuffle's pane in iTunes, and click on the Contents tab. At the bottom of that tab is the Autofill controls. Select to +Autofill from+ the playlist you just created and populated. Click the Autofill button to sync.
    This is better because you can decide what to put on the shuffle the next time without the shuffle connected, AND when you sync, it's done all at one time, instead a few songs at a time if you do it manually.

  • I have a 2nd generation iPod....I have switch on the OFF position and it will periodically turn on (thus draining the battery) by itself.  How can I fix this?

    I have a 2nd generation iPod shuffle.  Recently, after I turn switch to OFF position, it will turn on (green light flicks on) by itself periodically and obviously battery gets drained.  How can I fix this?

    I don't know of a way to fix an issue with the switch, if it's a hardware issue.  You can try doing a Restore on the shuffle in iTunes, to see if there's some software glitch.
    However, I often leave my shuffle with the power swtich in the ON position.  When you are not playing music, the shuffle goes into a "sleep" mode after about a minute.  You'll notice that you need to press the Play button twice to get it to play again; the first press wakes it up.  In my day-to-day experience, I don't notice any difference in battery life between the shuffle being OFF and ON (and not playing), even if I leave it ON overnight.  And keeping it ON avoids needing to constantly move the tiny swtich, and saves it from wear and tear.
    So, you might try just keeping the power swtich in the ON position, and pausing playback to "turn it OFF."

  • I lost the original dock to my 2nd generation ipod shuffle, I have a new charger but it doesn't work. How can I charge it?

    I lost the original dock to my 2nd generation ipod shuffle, I have a new charger but it doesn't work. How can I charge it?

    If by "charger," you mean the USB docking cable, you need the original cable (or a compatible third-party replacement cable).  A cable that is for the current 4th gen (and 3rd gen) shuffle does not work with a 2nd gen shuffle, because the connector is different.
    This is the Apple replacement part (for a 2nd gen shuffle)
    http://store.apple.com/us/product/MA694G/A/apple-ipod-shuffle-dock
    There are third-party products that work, but make sure it is described as being for the 2nd gen shuffle.  And I would avoid the ones that just seem too cheap, because there are likely to be quality issues.

  • I have a first generation ipod shuffle and the light keeps turning from orange to green and blinking back and forth. What should I do?

    I have a first generation ipod shuffle and the light keeps turning from orange to green and blinking back and forth. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • 2nd generation ipod shuffle not recognized by usb 3.0 port, 2nd generation ipod shuffle not recognized by usb 3.0 port

    Hi,
    My 2nd generation ipod shuffle will not connect to any usb 3.0 port.  I've tried on to computers -- one Windows XP and the other Windows 7.  Any ideas?

    Hi
    I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
    The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
    What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
    I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
    I really hope this helps.

  • TS1369 2nd generations Ipod Shuffle with Windows 8?

    How do you get a 2nd generations Ipod Shuffle compatible with Windows 8? (it works on just fine in earlier versions)
    If you plug it in through a USB connection it blinks orange/green really really fast. It is not recognized neither by Itunes or Windows (PC), Not recognized nor taking any charge.
    I first thought it just came to the end of its life, but then plugging it in with my old laptom (Windows XP) and another laptop (Widows Vista) it worked just fine.
    I have the newest version of all my software, so this has to be a driver compatibility issue, the question has Apple solved it yet?

    I asked about the USB docking cable because some folks who also have a 3rd or 4th gen shuffle were trying to use the cable from those shuffles with a 2nd gen shuffle.  Or they bought a replacement part that is for the 3rd or 4th gen shuffle.  It fits, but the connector is different, so it does not work.
    You have determined that the shuffle and its cable work properly when connected to a different computer.  Since the Windows 8 computer is a new computer that was not used with this shuffle before, the cause could be related to the computer's hardware or software.
    As a test, if you have another device that is similar to an iPod, such as a USB flash drive or a mini external hard drive that is powered by the USB port (not something low-power like a mouse or keyboard), connect it to the computer's USB port to confirm the port does generally work for other things.
    If the USB port is confirmed to work for other devices, if you have a USB hub, as another test, connect the hub to the USB port.  Perferably, the hub is the type that is self-powered (has its own power supply).  Connect the shuffle to the hub to see if that makes any difference if the hub is between the iPod and the computer.

  • I have a 2nd generation iPod that only displays an image of the cord, and an arrow to connect to iTunes. I've done this and it says it needs to be restored. Tried that but I get an error: 1611.  Any suggestions?

    I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else.  I tried turning off using both buttons...nothing. Any suggestions?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694#error1611
    Note it could be a hardware problem

  • HT1719 I have a 2nd gen. iPod shuffle that I got from my grandson,and want to load music, or delete songs.  I don't have  the software for it.  Can I still get that?

    I have  a 2nd gen. ipod shuffle that I want to load music onto, but only have the shuffle.  can i get software for it?

    Hi, my son has a second generation shuffle (the first type of aluminium clip-on one) and the current version of iTunes "talks" to it just fine. iTunes is a free download from Apple. That's all the software you need.

  • My 2nd generation iPod Shuffle suddenly quit - Fix?

    My 2nd generation iPod Shuffle suddenly quit on me just recently with no warning.
    The lights indications say t has no music on it but connecting it to the computer shows the loaded tunes. I tried a full reset and reloaded the tunes but still no joy.
    Further reading suggests either a dead logic board or a sick battery.
    As a last resort I am wondering if anyone knows of a software approach before I get the tools out and start pulling it apart.

    I've found my own answer...
    I was getting the green-orange-green-orange sequence of lights which all the info I had found to date said was the "No music" code. As I could see the MP3s on the iPod in iTunes I knew there was were MP3s on it.
    Various knowledge seraches I did suggested adud battery or dead logic board - both terminal problems for this model unless you have spare parts ( which I do, courtesy of friends who have retired their Gen 2 iPods).
    Then I found that under recent versions of iTunes (V 8 or later) it won't recognise podcasts or audio books as being present if you have the iPod set on shuffle.
    I only ever listen to podcast and audio books on my Gen 2 AND had bumped the mode switch onto shuffle resulting in an apparently dead iPod. Put the  mode switch back to continuous and it's working again. Stupid !
    I love Apple products  but I'm also a firm believer in the principle of "If it ain't broke don't fix it". All too often I seen Apple 'fix' something that wasn't broken over the 25 years I've been an Apple user.

  • I have a 2nd generation Ipod. I have it connected to my computer and see (my name) ipod on my screen. Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:   The Ipod, (my name) is synced with another ITunes li

    I have a 2nd generation Ipod.
    I have it connected to my computer and see (my name) ipod on my screen.
    Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
    The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
    An Ipod can be synced with only one ITunes library at a time.  Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
    Then it asks me if I want to delete and sync.
    I am not sure what to do for fear of erasing everything I have put on my Ipod.
    I would appreciate if someone could help me out. 

    If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
    Here is the iPod/iTunes manual from the Apple Support Site.
    http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
    Have A NICE DAY!

  • I have a 1st generation iPod shuffle when I switch on and press wheel a green and then orange light flashes.?

    I Have a 1st generation iPod shuffle, on the wheel it's flashing green and orange.....any ideas.? 

    It sounds like the "Error light" described toward the end fo this document
    http://support.apple.com/kb/HT1814
    The document provides some possible causes, and things to try, including doing a Restore if the other suggestions do not apply or do not work.

  • I have a 4th generation iPod shuffle which does not show up in windows or iTunes. But my iPhone does any suggestions?

    I have a 4th generation iPod shuffle which is not recognised in windows or iTunes when I connect to the computer , yet I have no problem when I connect my iPhone. I have installed the latest iTunes. Can anybody help me?

    Thanks! But I actually figured it out! Right after I said something about the driver, I went into device mangager. Sure enough even though it did not show up as a drive letter the device manager said is was installed and working.
    So I deleted the device out of device manager. Restarted and plugged it in. Although I go some weird error. It found the IPOD and now Itunes sees it.
    I believe that killing the process would have done the same thing as you stated.
    Thanks to all for taking the time to answer these issues. It beats the apple store or tech support.

  • I have two 2nd generation iPods and iTunes will no longer let me delete songs (Delete in gray)?

    I have two 2nd generation iPods and iTunes will no longer let me delete music from either one. If I select a song, "Delete" is gray in the menu and cannot be selected. What's happened? New iTunes not compatible?

    In order to manually remove music from the iPod via iTunes, you need to have the Manually manage music and videos option checked from under each iPod's Summary tab.
    See this article for more details.
    http://support.apple.com/kb/ht1535
    B-rock

  • I have a 2nd generation ipod touch. is it possible for apple to send me a 4th or 3rd generation ipod touch, say if they ran out of 2nd generation ipods?

    i have a 2nd generation ipod touch im getting the screen repaired. is it possible for apple to send me a 4th or 3rd generation ipod touch, say if they ran out of 2nd generation ipods?

    jermainer180 wrote:
    i have a 2nd generation ipod touch im getting the screen repaired. is it possible for apple to send me a 4th or 3rd generation ipod touch, say if they ran out of 2nd generation ipods?
    Of course not.
    They will send you the same model you send them.

Maybe you are looking for

  • Search Help Problem - Passing parameter between to search helps.

    I created following 2 table for entering data in PO screen using ME21N using Custom Data Tab. ZSTATE_TAB - State table  (has elementary search help ZSTATE_SH - Value of SCODE is exported) SCode(Key)     Description S001           New York S002       

  • Information for IDOC type TPSDLS01

    Hi, I want to create an IDOC for IDOC type <b>TPSDLS01</b>. The message type for this IDOC is TPSDLS. I need following information, since i am working for last two days and i am unable to figure it out. pls. it is urgent 1). Application , i found it

  • Leave Request: Show Team Calendar

    Hi Friends, In Webdynapro javaLeave Application we have the option(Link) Show Team calender.It displays only direct reporties to that org unit. But it not displays the sub org unit chiefs in that list. Do we have option to display all sub org unit ch

  • 72 Days and counting and Photo Stream still grayed out in iCloud CP

    72 Days and counting and Photo Stream still grayed out in iCloud CP since problem first discussed with Apple. No help, just reported to software engineers for investigation. Two months ago! So much for Apples's superior products and customer service.

  • What is the "Adapter" subsystem ?

    Hi, On the console (WLS6.0), in mydomain->myserver->log, it is possible to customize the server logs (using "Search and Customize" link). Among the available subsystems one may search by, there is a subsystem called "Adapter". Could anyone tell me wh