HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Similar Messages

My MacBook Pro has just started getting really warm for no apparent reason, any ideas why?

Should I use my Apple Care, or is there a quick fix?

you see what is running on your computer (because CPU usage is what makes the procesor(s) get hot) by opening the application "Activity Monitor" in the folder "/Applications/Utilities", then select the "CPU" tab (at the bottom) and sort the information in the top section by "%CPU":
This will show you what application is using the most CPU time and is the most likely candidate for why your machine is warming up. You can also quit all applications, then reboot to see if that resolves the problem.

Hi, I have a mid 2009 macbook pro, and I'm looking to upgrade my internal hard drive with a 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s.

But I keep hearing that my MBP will not support SATA III. Is that true?

Welcome to Apple Support Communities
Your MacBook doesn't support SATA III, so if you install a SATA III HDD, it will work with SATA II speeds.
That hard drive should work. Also, 7200 rpm hard drives will give you extra performance

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

Samsung hard drive problems with mid 2009 Macbook Pro

Arghh, this is driving me mad.
I'd like to know if anyone has installed a Samsung HM641JI SATA II hard drive into a mid 2009 Macbook Pro (mine is a 2.8Ghz) and, if so, how they managed it. The drive is 640GB. These are the steps I've taken:
1. Swap out the stock drive for the Samsung
2. Boot from a USB drive which contains a mirror of my system
3. When the system identified the new disk, I formatted it with 2 partitions (GUID table, HFS journaled)
4. Reboot
5. System is very slow. Boots from USB but can't use keyboard to login
6. Switch off and try again
7. Remove Samsung drive
8. Reboot from USB (works perfectly)
9. Downgrade firmware to 1.6
10. Replace samsung drive and try again
11. System boots from USB
12. Verify that drive is running at 1.5Ghz
13. Disk utility and system profiler both crash
14. Disk unmounts by itself and other random weirdness
15. Remove Samsung drive
I've read endless reports about the firmware in this model of Macbook Pro and its issues with SATA II but struggling to find anything current and specific. Two questions:
a. Is there anythign I can do to get this drive to play nicely?
b. What drive should I get if the answer to a is no?
As a bit of background.. my system began playing up last week with lots of spinning beach balls resulting in forced switch offs. Booting from a mirror on a USB drive works perfectly so I concluded that the drive was on its way out. A drive test utility confirmed this. I'm now wondering if it really was the drive or the cable or the logic board.
Any advice appreciated.
Cheers
//A

I'm coming around to the idea that this might be a problem with the SATA cable rather than the drive.
I currently have the stock drive (Hitachi) back in the macbook. It mounted for a while and was then ejected when I tried writing data to it. System profiler reports that "There was an error while scanning for Serial-ATA devices."
I was able to mount the same drive in a USB enclosure this afternoon without any problems. Right now, I seem to be having issues with both the Samsung drive and the Hitachi drive - I wasn't suspicious of thr latter because I thought it was failing.
I found one or two accounts of other people having similar problems that were resolved with a new sata cable.
How does a cable fail? Could this be my problem?
Cheers
//A

Only Apple Branded Hard Drives Work in My Mid-2009 MacBook Pro

My Mid-2009 MacBook Pro (actually, my wife's) experienced a hard-drive failure about a year ago. This was a 500GB 7200RPM drive that came BTO from Apple.
It's easy enough to replace HD's, so, I did it myself with a Seagate 7200RPM 500GB drive, the same model as the one from Apple, but I got this one from Seagate, not from Apple, so it didn't have the Apple logo (and firmware?) on it. The drive did not work. I was able to format the drive using Disk Utility, but when I tried to install Snow Leopard on it, it would fail. I placed the new drive in my other MBP (early 2008), and installed SL, no problems. Booted to it just fine.
I put it back in the 2009 MBP, and it would not boot - it would show the flashing folder with a question mark. I put the drive in a usb enclosure and the MBP booted from it just fine (well, a little slower because the usb speed, I presume).
I bought another Seagate and experienced the same problem. I bought a Hitachi and experienced the same problem. I took it to an authorized Apple repair facility who told me that the HD was bad (which was obviously false, since all 3 HD's I tried worked just fine in my other computer).
So, I took it into Apple and gave them the whole story and they ran overnight hardware diagnostics and were unable to find (or fix) a problem.
So, I played stupid and brought it back again, saying "uh, my hard drive broke, can you fix it?" hoping that they would try to replace the HD and fix the problem or at least diagnose it.
Well, they put an Apple branded HD back in, and it works just fine.
Seemingly, that would be problem solved, and life has been fine for the last year. But, now we bought an OptiBay to ditch the DVD drive and place a 750GB (non-apple) drive in the optical bay. To my surprise, the non-apple drive works, but, it is pretty slow (we put our iPhoto library on there, and it chokes very badly when you ask it to do anything, such as zoom on a picture, play a video, go to full screen, etc. It takes about 30 to 45 seconds of SBOD to perform those tasks.
I am wondering if there was any way we could have damaged the SATA connector or driver? Why would only Apple branded drives work in the main HD bay? I don't know if an Apple branded drive would preform better in the optical bay or not.

I recently saw a similar situation described in another forum and someone directed the OP to look for a jumper on the drive. I raised my eyebrows--that sounded like old PATA technology--but, sure enough, the OP found a jumper, changed it and everything worked. This apparently changed the timing on the drive to match Apple products. I'm leaving town and won't have much time to search myself, but try a forum search for "SATA jumper" and see if something rings a bell.

Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4

I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers. I have everything present and accounted for except for the 'Coprocessor.'
I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't. Any thoughts/suggestions/solutions?

For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
This driver did not install with version 306.37 that came with the BootCamp drivers. I downloaded the current version from nVidia of 334.89 and that didn't work either. I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
NVIDIA nForce System Management Controller
I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system.

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

I have a mid 2009 macbook pro with a bad dvd drive. Can I use an external drive?

Is there an external CD/DVD drive that will work on a mid 2009 macbook pro with a bad SuperDrive?

Hi parrotdawg,
Please look at this post first:
https://discussions.apple.com/message/25385804#25385804
If that doesn't help, I have a Samsung SE-208AB/TSBS External DVD-Writer that works well with my mid-2007 MBP 15". Note this this drive requires 2 USB ports but doesn't use an external power adapter. Also, the above trick worked for me after I got this drive, so now I use it a Region 2 DVD player.
http://www.amazon.com/dp/B005KQ0S8S
Regards,
Ira

My Macbook Pro has just had a new hard drive put in it but i still need to install snow leopard without a disk?

My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Thanks

You might be in a bind. While is is normal for new Macs that shipped with Lion to omit a system installation DVD, yours was running Snow Leopard. Apple included a system installation CD or DVD for every computer that shipped with every computer through Snow Leopard. Lion was installed on every machine built starting about August 2011, ending the DVD era.
Apparently your computer had been sitting in someone's inventory for a while, but that's no excuse for them to have removed the DVD from its box.
Try booting Lion Internet Recovery. Read this:
http://support.apple.com/kb/HT4718
I suspect Lion Recovery may not work since "your computer's eligibility for Lion will be verified with Apple" and you appear not to have purchased it.
Please let me know what happens when you attempt to boot Lion Recovery.

I have a mid 2009 MacBook Pro 5,3 Unibody that won't run anything past Leopard.

I have a mid 2009 MacBook Pro 5,3 Unibody that suffered a minor liquid spill. After waiting for it to dry out, we found that it powers up (but the display doesn't work unless connected to an external monitor) just fine. For several months it worked like a tank running Snow Leopard. I upgraded to Lion with no problems. Once the 10.7.1 update came out, it completely flipped out and wouldn't finish the install. I was forced to take it all the way back to Leopard and now it won't upgrade past Leopard. I replaced the hard drive completely and tried a fresh install of Lion using the thumb drive and that didn't work either. I got the set of errors you will find below. (Sorry, I don't know how to hide them like you can in some forums.) Any ideas or suggestions on why it won't install Lion would be great. I'm not so concerned about the display as wondering why it worked for 4 months and then another month on Lion and then suddenly flipped out on me. I'm not knowledgeable enough to decipher the message below.
Jun 26 10:16:11 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:14: --- last message repeated 5 times ---
Jun 26 10:16:14 christine-cowens-macbook-pro authexec[158]: executing /Volumes/Mac OS X Install DVD/Install Mac OS X.app/Contents/Resources/InstallAssistantTool_10_5
Jun 26 10:16:17 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:18: --- last message repeated 1 time ---
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xa00a].com.apple.systemuiserver[98]: Unexpected reply from backup server - ignored
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xb00b].com.apple.finder[99]: Unexpected reply from backup server - ignored
Jun 26 10:16:25 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:55: --- last message repeated 11 times ---
Jun 26 10:17:53 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:18:23: --- last message repeated 9 times ---
Jun 26 10:21:50 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:22:20: --- last message repeated 7 times ---
Jun 26 10:22:21 christine-cowens-macbook-pro com.apple.launchd[72] ([0x0-0x14014].com.apple.installassistant[150]): Stray process with PGID equal to this dead job: PID 158 PPID 1 InstallAssistant
Jun 26 10:22:22 christine-cowens-macbook-pro loginwindow[23]: DEAD_PROCESS: 0 console
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: reboot by christinecowen:
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: SHUTDOWN_TIME: 1340731342 279916
Jun 26 10:22:22 christine-cowens-macbook-pro mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: stopping
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: Shutdown NOW!
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: System shutdown time has arrived^G^G
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Jun 26 10:31:07 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost kernel[0]: npvhash=4095
Jun 26 10:31:07 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Jun 26 10:31:07 localhost kernel[0]: hi mem tramps at 0xffe00000
Jun 26 10:31:07 localhost kernel[0]: PAE enabled
Jun 26 10:31:07 localhost kernel[0]: 64 bit mode enabled
Jun 26 10:31:07 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jun 26 10:31:07 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 26 10:31:07 localhost kernel[0]: vm_page_bootstrap: 905993 free pages and 77047 wired pages
Jun 26 10:31:07 localhost kernel[0]: mig_table_max_displ = 79
Jun 26 10:31:07 localhost kernel[0]: 104 prelinked modules
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for mb
Jun 26 10:31:07 localhost kernel[0]: Seatbelt MACF policy initialized
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jun 26 10:31:07 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jun 26 10:31:07 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jun 26 10:31:07 localhost kernel[0]: MAC Framework successfully initialized
Jun 26 10:31:07 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Jun 26 10:31:07 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Jun 26 10:31:07 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jun 26 10:31:07 localhost kernel[0]: mbinit: done
Jun 26 10:31:07 localhost kernel[0]: Security auditing service present
Jun 26 10:31:07 localhost kernel[0]: BSM auditing present
Jun 26 10:31:07 localhost kernel[0]: rooting via boot-uuid from /chosen: CFA77CDA-F33D-3F25-97CF-9E5EE113C739
Jun 26 10:31:07 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jun 26 10:31:07 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Jun 26 10:31:07 localhost kernel[0]: 5.10.91.21
Jun 26 10:31:07 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 0025bcfffee5710e; max speed s800.
Jun 26 10:31:07 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420AS Media/IOGUIDPartitionScheme/Untitled@3
Jun 26 10:31:07 localhost kernel[0]: BSD root: disk0s3, major 14, minor 3
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 2878464 to: 2969088 (joffset 0x4b7000)
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jun 26 10:31:07 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Jun 26 10:31:07 localhost kernel[0]: Jettisoning kernel linker.
Jun 26 10:31:07 localhost kernel[0]: Resetting IOCatalogue.
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 2
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 4
Jun 26 10:31:07: --- last message repeated 4 times ---
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 5
Jun 26 10:31:07 localhost kernel[0]: NVDANV50HAL loaded and registered.
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Previous Shutdown Cause: 3
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe(MacBookPro5,3)
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: AGC: 2.8.15, HW version=1.8.8, flags:0, features:1
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 0
Jun 26 10:31:09 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jun 26 10:31:11 localhost bootlog[36]: BOOT_TIME: 1340731864 0
Jun 26 10:31:11 localhost rpc.statd[18]: statd.notify - no notifications needed
Jun 26 10:31:11 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jun 26 10:31:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jun 26 10:31:12 localhost fseventsd[27]: bumping event counter to: 0x25d156 (current 0x0) from log file '000000000025c40a'
Jun 26 10:31:13 localhost kernel[0]: NVEthernet: Ethernet address 00:25:bc:e5:71:0e
Jun 26 10:31:13 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:26:08:e3:43:79
Jun 26 10:31:13 localhost blued[45]: Apple Bluetooth daemon started.
Jun 26 10:31:14 localhost mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: starting
Jun 26 10:31:14 localhost com.apple.usbmuxd[15]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 32 bit
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::mediaChanged - Link is down
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: AirPort: Link Down on en1
Jun 26 10:31:15 localhost kernel[0]: jnl: disk0s2: replay_journal: from: 9485824 to: 9519104 (joffset 0x9d9000)
Jun 26 10:31:15 localhost /usr/sbin/ocspd[68]: starting
Jun 26 10:31:15 christine-cowens-macbook-pro configd[34]: setting hostname to "christine-cowens-macbook-pro.local"
Jun 26 10:31:16 christine-cowens-macbook-pro kernel[0]: jnl: disk0s2: journal replay done.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: 802.11d country code set to 'CN'.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 149 153 157 161 165 153 161 149 157
Jun 26 10:31:19 christine-cowens-macbook-pro org.ntp.ntpd[14]: Error : nodename nor servname provided, or not known
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: can't find host time.apple.com
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: no servers can be used, exiting
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: Auth result for: c8:3a:35:56:9b:80 MAC AUTH succeeded
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: AirPort: Link Up on en1
Jun 26 10:31:21 christine-cowens-macbook-pro kextd[10]: writing kernel link data to /var/run/mach.sym
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window Started Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismInvoke 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismInvoke 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window - Returned from Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismDestroy 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismDestroy 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: USER_PROCESS: 23 console
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[82]): Exited: Terminated
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (org.x.startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:26 christine-cowens-macbook-pro /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christine Cowen's Public Folder) returned -14135

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

I am having problems rebooting my mid 2009 macbook pro (grey screen other issues), need help!

I am having problems rebooting, I have experienced the same problem as others with the grey screen but my case is a little different, It started with my mid 2009 macbook pro acting a little slower than normal, the screen would freeze, mouse wouldnt move and i'd be forced to "force reboot" this went on for a couple of days until i was tinkering with the wifi connection and it froze again. I had to reboot and this time i noticed that it took a long time to get to the login screen. i put in my password and it went into infinite load (i also tried the guest account and other accounts with same result). i tried rebooting again and the same thing would happen. after several reboots, the screen just stayed grey, sometimes with the apple logo and gear sometimes without it. Since its a 2009, (and for the most part, still works like a champ) i decided test the ram, i took one stick of ram out at a time to see if i could notice anything wrong with them. when i stuck just one in, the mac was still having the same problem rebooting. i pulled that ram and and stuck in the other and i noticed that this time the apple logo never appeard and a big crossed out circle appeared. figuring that the ram must be the problem, i ordered new ram and installed it. i noticed that when i rebooted for the first time with the new ram it was rather quick and took me straight to the login screen and i was able to log in with no problem. at this point i thought the problem was solved, but i noticed the macbook still acting funny. at first, none of my files appeared on my desktop or in the finder window. after about 20 minutes, everything magically popped up. i also noticed long pauses/freezes with the colored pin wheel spinnig. i closed the laptop and opened it again and the screen just stayed black. i tried rebooting again, and again i got the grey screen with no signs of being able to log in... i waited about 20 minutes and tried to reboot again and again i was able to log in, however the macbook is still acting slow and will freeze with no signs of unfreezing without a reboot.
my macbook is 5 years old and has plenty of miles on it, so i understand if the thing needs to be replaced alltogether but does anyone know what could be the issue? could the bad ram have corrupted the hard drive in anyway? would re-installing the OS fix it?? and if so, how would i do that if i downloaded mavericks from the app store? are there any other solutions to this problem?
all my files and what not are backed up on an external HD so theres nothing on it that i'd miss desperately if i had to whipe the hard drive but id really like to get her working again without any whiping of the HD. if anyone can help me out, it'd be greatly appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Mid 2009 MacBook Pro not reading SSD? Help

I have bought a Kingston Hyperx SSD for my mid 2009 MacBook Pro but the laptop does not see the SSD. I have booted the SSD externally installed OSX and it boots fine on the laptop but NOT when fitted internally. Is this a firmware/software problem or is my MacBook simply not compatible with this drive? I have tried everything I can think of and the IT guy at my work has not got a clue either! ImGuessing a standard HD will work but as my old HD died I wanted to go to SSD.
Need some help ASAP!
Thanks!
Sam

The 2009 models were notorious for having faulty SATA cables and I'm betting that's the problem. Go to www.ifixit.com, find the part number for the SATA cable and search eBay for a replacement cable (ifixit simply want too much for the cable - and I've never known anyone who has received a faulty cable from anyone on eBay).
I'm at least 95% certain that's your problem.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Lion login screen problems on Mid 2009 MacBook Pro

After upgrading my wife's Mid 2009 MacBook Pro from Snow Leopard to Lion we are seeing weird behavior on the login screen after the computer wakes from sleep mode.
The screen is only partially drawn (usually the top left 1/4 of the screen), and the grey background is shown instead of her desktop background picture. When you move the mouse around on the screen, it repaints blocks on the screen where the pointer has been.
This only seems to happen when the machine sleeps for a long period of time, e.g., overnight. When it just sleeps for a little while we don't see the issue.
When searching the forums for anyone else with the problem, several folks said that there was an issue with the video drivers for the 9400M card and recommended switching to the 9600M GT, but her machine only has the 9400M in it.
All other aspects of the system work fine.
Anyone else seeing this? Any clues?

Surprised there hasn't been anyone else experiencing this issue.
I have seen this on 2 new MBP 2.3mhz i5's with the Intel HD 3000 384mb graphics, Lion 10.7.3 & 10.7.4.
Also with the latest Lion firmware for the late 2011 MBP's that addresses compatibility and stability issues.
Hopefully there is a fix soon because the painting on my locked screen to login is getting annoying

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

Similar Messages

Maybe you are looking for